Equipment For Sale

Timberjack 240A Cable Skidder

1997 Timberjack 460 Grapple Skidder, Hours Reading 17,248, Winch, Enclosed Cab with Heat and Air Conditioning, Full Glass Cab, 28L x 26 Tires, Chains, Center Section is Tight, Ready for the Woods. Length:23 ft 0 in Width:10 ft 1 in Height:10 ft 7 in Weight:30,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Runs Well 453 Detroit Engine New Grapple New Brakes

2004 Timberjack 660D Grapple Skidder, Has Winch Mount, but No Winch, Tires are 30.5 x 32, Good Tread, Enclosed Cab with Heat and Air Conditioning, Engine is a 6081 Deere. Hours are 14,000, New Brakes, Ready for the Woods. Length 23 ft Width 10 ft 1 in Height 10 ft 7 in high weight 30,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2003 TIMBERJACK 360D CABLE SKIDDER METER READS 4,936 HOURS GOOD TIRES GOOD CHAINS TIGHT CENTER JD ENGINE WOODS READY FINANCING AVAILABLE WITH NO MONEY DOWN GRANITEHE.COM

Really nice 1997 Timber jack 460 Compete tran rebuilt, Pins an bushings Some new hyd hoses New windows New 28 L 26 tires New water pump an thermastat A C gone thru All new filters

TIMBERJACK D250 DELIMBER

2006 Timberjack 608 Track Cutter

Timberjack 2618 Feller Buncher 8.3 Cummins Low hours on engine Koehring S547TJ2600 hotsaw head UC is good Woods ready PRICE REDUCED WILL CONSIDER REASONABLE OFFERS

1995 Timberjack 608B, 18 “ head, Cummins Diesel Hours unknown, Small hydraulic leak near the pumps but it runs quite often and no issue 18" koehring saw head runs everyday reliable starts good in the cold… Operating weight 46,300lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Timberjack 608B Feller Buncher 10,000 hours $10K in new hydraulic lines John Deere motor Very clean Asking

Timberjack 618 Feller Buncher New 8.3 Cummins REDUCED Hotsaw Works good

2008 TIMBERJACK 740 FELLER BUNCHER 9,675 HOURS 1,500 ON NEW ENGINE 1,000 HOURS ON PUMPS RECENT FRONT END AND REAR END HEAT AND AC VALVE BODY RESEALED GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS DEFERRED PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

2006 Timberking 456 Forwarder -28000 frame hours -8000 hours on rebuild -Excellent condition -Tight and dry -Reman JD engine/transmission -Recently serviced -Joystick drive -Chains and tracks MORE PICTURES COMING SOON!!!!!!!!!!

2006 TIMBERKING TK711 FELLER BUNCHER 9,842 TOTAL HOURS 2021 RYANS HEAD DS-3550 FELLING HEAD RECENT FINALS LOTS OF PUMP WORK VERY GOOD UNDERCARRIAGE OWNER OPERATOR VERY GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS NO PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

2005 Timberking TK560 -8082 original frame hours -Motor done by last owner -Main bearing done last owner (tight and dry) -Hydraulic trailer -Off road mud tires (new) -CTR delimber -Hood circle saw -Tight and dry machine just had a few hoses replaced Ready to work

2005 Timberking 560DS Truck Mounted Log Loader, It can run circular saw and pull through delimer, Recent motor, Pump work great, Mounted on a 88 Paystar International it’s inspectable 100% road worthy. Truck has been completely gone through all new joints bearings all new brakes and components has a 500 ProPac slasher with a new saw disc. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Timber King T-802 Edger -22hp Kubota diesel engine -2 blades -Built in metal skids Works as it should!!!!

2016 Timberking 2200 Sawmill -Less than 600 hours -49hp Kubota diesel engine -About 40 blades come with mill. -Very good sawmill runs and operates as it should -All hydraulics

The 1220 Timber King Band Mill is a robust and efficient sawmill, designed with durability in mind. Manufactured in 2017, this used model has been well-maintained, kept under a roof, and shows minimal signs of wear. It operates with an 18 HP Vanguard engine, providing reliable power for your milling needs. This model features a thin kerf design, enhancing its efficiency and material economy. Included with this band mill are 31 brand new blades, enhancing its immediate operational capability. The 5-gallon lube reservoir ensures smooth operation and reduces maintenance frequency. Additionally, the mill comes equipped with roller guides, contributing to precise cuts and improved output stability. Its 4-post design provides added stability and durability akin to new models. Overall, the Timber King 1220 offers a quality milling experience with its substantial power and practical features, making it an ideal choice for users seeking reliability and efficiency. For more information and further inquiries, interested buyers are encouraged to reach out directly.