Equipment For Sale

JET - JC-3CF: Cyclone Dust CollectorCyclone action separates the heavier chips & particles and disposes of them into a 55-gallon drum. -- 3 HP with 1,450 CFM -- Inlet size 8", Outlet size 8". -- Large 8-fin, 14" steel impeller creates high velocity air flow that allows the lighter dust to pass through and be trapped in the filter. -- Filter bag provides: Almost 40 sq/ft. of filtration surface area for all dust particles 5-micron and larger. -- Collection bags: "Snap-In" design for quick & easy installation and removal. -- Use of JET's "EXCLUSIVE" pressure tube allows the use of a plastic collection bag in the drum without the bag getting sucked into the Cyclone. -- Special rectangular inlet pipe adds separation and additional air flow. -- Steel construction with: Welded seams & powder coated paint ensures long, dependable performance.

New 35 Ton Ag Hydraulic Detach, 53’x102, 34' Well, 33” Heavy Duty 3 Beam Aluminum Slide-outs, 14’ Overall Width, 4 Position Front and Rear Adjustable Ride Height 18-24", Manual Override, Air Ride Suspension, Liquid Air Gauge, Lockable Toolbox, Aluminum Front Deck, Full Center Apitong Wood Floor, Full Covered Rear Deck, 255/70R 22.5 Tires, Strobe Lights with Battery Backup, Keyhole Tie Downs on 3’ Centers, Drings on 6’ Centers Prices are plus FET

JET EHVS-80 6"; x 89" Non-Oscillating Horizontal/Vertical Edge SanderSpecifications: -- Table size 12-1/2"; x 37"; x 3/4"; Thick, Table tilt 0° - 90°. -- Platen size 7" x 34". -- Belt speed 3,900 SFPM.Equipped with: -- 6" x 89" Abrasive belt. -- 1-1/2 HP 3,600 RPM Direct drive motor.Palletized Dimensions: 50" x 31" x 44" H.

Jet Turret Milling Machine

JET EHVS-80 EDGE SANDER (NON-OSCILLATING)(Single-Phase) ---Price Negotiable---Make an Offer!--- - 6” x 89" Non-Oscillating Horizontal/Vertical Edge Sander - Table size 12-1/2” x 37” x 3/4” Thick, Table tilt 0° - 90° - Platen size 7" x 34" - Belt speed 3,900 SFPM - 6" x 89" Abrasive belt - 1-1/2 HP 3,600 RPM Direct drive motor - Palletized Dimensions: 50" x 31" x 44" H

19' Platform Height 25'6" Working Height 30" Platform Width Expandable Platform Non Marking Tires Onboard Charger Upper Controls Lower Controls

2012 JLG Manlift, 35’ Boom, jib Boom, Tracks, Showing 4000 Hours, Nice

ZERO SALES TAX FOR OUT OF STATE SALES! ZERO DEALERSHIP FEES! ZERO NONSENSE! ULTRA LOW RATE IN HOUSE FINANCING FOR BUSINESS AND INDIVIDUALS! 60 ft Max Lift Height, 500 lb Max Weight Capacity, Jib, Power to Platform, Tier 4, 2014 US EPA Label, Kubota 1 Cylinder 4.5 kW 0.276L Diesel Engine, 36x14LL-22.5 Tires Shipping Not Included- Call For Pricing!

35’ reach, 2250 hours, dual fuel, 4WD

2020 JLG 1732 Pneumatic Tire Forklift with 5,084 hours on a diesel engine. Load backrest, Overhead Guard, and Enclosed Cab. Fork Length 72", Max Ht. 30'. Tires have 45% tread remaining. Weight 34,418 Length: 233 in Width: 97 in Height: 8 ft 9 in. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

JLG Man Lift

2006 JLG G6-42A Stand-Up Reach Forklift with 4,093 hours. Max Lift Height 42ft in, Max Forward Reach 28.97ft in, Lift Capacity 6,600 lb. Operating Weight 20,399.4lb Length To Fork Face 17.72ft in Width Over Tires 7.91ft in Overall Height 7.81ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2014 JLG G5-18A Stand-Up Reach Forklift with 1,157 hours. 74 hp, Max lift Ht. 18.05ft in, Max Forward reach 10.83ft in. Lift Capacity 5,500 lbs. Operating Weight 10,800.5lb 12.6ft in Height 6.4ft in Width 6ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

JLT CLAMPS 718A-M2-12-M Panel and Door ClampBuddy System includes #79F-12-PC & #717CUnique all-in-one Panel Clamp & Cabinet Door Clamp. -- The DDC has a larger clamping area of 38" Deep x 98" Wide with a splitter for two (2) door clamping. -- Double door design, air operated assembly clamp specifically designed for entry doors, cabinet doors or windows. -- (2) Heavy Duty quick adjusting pneumatic clamping cylinders & (1) quick adjusting cross-clamp on the side. -- (1) Quick adjusting cross-clamp for the rails with (3) draw clamps for the stiles. -- 2" Deep squaring fence along left and bottom sides. -- Single-lever cylinders for quick & accurate clamping pressure. -- Shelf area to hold the pieces of the frame prior to clamping for all squaring components. -- 5-Tier self-supporting rack unit; each tier is 12' wide; total of (18) clamps on the rack. -- 32" or 40" Opening clamps available; must be specified when placing order. -- Clamps with 2-1/2" high jaws and manual movement & tightening. -- Additional clamps are available. -- 40 Sq. ft. footprint.

JLT CLAMPS 79F-M2-8-PC Panel and Door Clamp. An Industry standard for Cabinet doors and so much more. -- (5) Levels of 8' wide x 40" deep cap. -- Heavy tubular frame with (18) clamps. -- Manually adjustable bar clamps that easily set in place and move from side-to-side. -- 40" Clamp opening with a 3-1/2" high x 4" wide jaw. -- Additional opening clamps available.

JLT 717C-DC Cabinet Door Clamp:Pneumatically operated Cabinet Door Clamp to square & clamp door in (1) Second. -- 26" Front-to-back x 62" left-to-right clamping capacity. -- Single row door clamp with (1) horizontal pneumatic clamp & (2) vertical pneumatic clamps. -- Special mount on a 30° angle for ease of loading & less operator fatigue. -- (3) Large diaphragm cylinders for quick clamping pressure with single lever operation. -- 40 PSI Air pressure to produce 500 Lbs of force on each clamp. -- Shelf to hold the pieces of the frame before pressing on all squaring components. -- 40 Sq. ft. floor space requirement.(Replaces: #717A-DC)

JLT CLAMPS 717C-DDC CLAMP, PANEL AND DOOR.Pneumatically operated Cabinet Door Clamp to square & clamp a door in (1) Sec. -- 38" Front-to-back x 98" left-to-right clamping capacity. -- Single row 2-station Door Clamp with (2) horizontal pneumatic clamps and (4) vertical pneumatic clamps. -- Special mount on a 30° angle for ease of loading & less operator fatigue. -- (6) Large diaphragm cylinders for quick clamping pressure with single-lever operation. -- 40 PSI Air pressure to produce 500 Lbs of force on each clamp. -- Shelf to hold the pieces of the frame before pressing for all squaring components. -- 60 Sq/ft footprint.(Replaces #717A-DDC)

JLT 79F-M2-12-PC Panel and Door Clamp An Industry standard for Cabinet doors that offers so much more. -- (5) Levels of 12' width x 40" depth cap. -- Heavy tubular frame with (6) clamps per level x (5) levels for a total of (30) clamps. -- Manually adjusted bar clamps that are easily set in place and can move from side-to-side. -- 40" Clamp opening with a 3-1/2" high jaw. -- Additional clamp openings available.

JLT CLAMPS 718A-M2-12 Buddy System Panel and Door ClampBuddy System includes #79F-12-PC & #717CUnique Panel Clamp & Cabinet Door Clamp all-in-one. -- 38" Deep x 98" wide clamping cap. -- Air operated assembly, single row Clamp on a 70° angle specifically for entry doors, cabinet doors or windows. -- (2) Heavy Duty quick adjusting pneumatic clamping cylinders. -- (1) Quick adjusting cross-clamp for the rails with (3) draw clamps for the stiles. -- 45° Working angle for easy access & less fatigue. -- 2" Deep squaring fence along left & bottom sides. -- Single lever cylinders for quick & accurate clamping pressure. -- Shelf area to hold the pieces of the frame prior to clamping for all squaring components. -- 5-Tier self-supporting rack unit; each tier 12' wide for a total of (18) clamps. -- 32" or 40" Opening available; must be specified when placing order. -- Clamps with 2-1/2" high jaws with manual movement and tightening. -- Additional Clamps available. -- 40 Sq. ft. footprint.

JLT CLAMPS 79K-10 Panel and Door Clamp; Versatility-Leave the center squaring bar to do multiple doors at once or remove the bar to take advantage of the full capacity of the machine. -- Capacity for solid wood doors 48" x 120". -- Quick release latches on the jaws and moveable squaring bar. -- The squaring mechanism can be re-calibrated if necessary. -- (2) Horizontal pneumatic clamps. -- (4) Vertical pneumatic clamps. -- One lever operation. -- 1000 Lbs of clamping force per cylinder. -- 3" Stroke from each cylinder.Custom sizes available in 1' increments ...ask the Product Manager.