Equipment For Sale

Filtering

Reset All 

thru
 Used     New
Viewing Page 219 of 478
9541 Results Found
Sort By 
$ 175,000

2013 Komatsu 430XT Harvester -12040 hours -Uc 40% -Ctl head 24 inch disk -Tight and dry -Everything works as it should Woods ready

Josh Digirolamo
828-302-7264
Call

Call for Price

LOEWEN 08 FELLING HEAD ROTATOR FITS KOMATSU -3 CONFIGURATION FITS KOMATSU/TIMBCO BAR SAW ATTACHMENTS

 Lancaster, NH
Anderson Equipment Company
518-527-8086
Call

$ 135,000

4700 Hours 3rd Auxiliary hydraulic valve Very good condition Comes with 3 cu. yd. Bucket 7 cu. yd. Mulching bucket 6 ft. Forks Operating Weight: 36,927 lbs

Carolina Used Machinery
828-773-2204
Call

Call for Price

Quadco 22SC Sawhead

 lancaster, NH
Anderson Equipment Company
518-527-8086
Call

$ 86,000

2006 KOMATSU PC200LC LOGGING PROCESSOR -Rebuilt pumps -Rebuilt motor -80% under carriage -sprockets idlers Boom cylinders were all repacked -622B Warthoug Processing head -has new monitor -new head module -new cab module -new saw motor -Cuts up to 28" timber

Keith Comeau
704-929-9122
Call

Call for Price

2016 Komatsu 430 Feller Buncher, Equipped with a Quadco 22" 360 Degree Wrist, NEW UNDERCARRIAGE, Hours are 8,800, Non Def Engine, Espar Heat, Enclosed Cab with Heat and Air Conditioning, New Swing Bearings, Pump, New Sensor for ICAN, New Starter and Fuel Pump. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Fairfield, ME
NEF Equipment
855-251-2648
Call

$ 169,500

2015 Komatsu D61PX-24, 4532 hrs., Stk# KM20131, Komatsu SAA6D107E-3 engine 168 HP 42,902 lbs, Enclosed ROPS, $169,500

 Escanaba, MI
Roland Machinery Company
906-786-6920
Call

$ 199,500

2017 Komatsu D65PX-18, 3786 hrs., Stk# KM20132, New chains and sprockets 36” pads Straight blade Komatsu SAA6D114E-6 engine 217 HP 51,960 lbs, $199,500

 Escanaba, MI
Roland Machinery Company
906-786-6920
Call

$ 379,500

2016 Komatsu D155AX-8, 3535 hrs., Stk# KM16370, 3 shank ripper Eau Claire, WI, $379,500

 Escanaba, MI
Roland Machinery Company
906-786-6920
Call

$ 273,900

2017 Komatsu 931XC Processor, Equipped with a C144 Processor Head, 10,800 Hours, New Main Hydraulic Pump, New Fuel Injection Pump, 1 Set of Eco Tracks, a second set of Evo Tracks on Rear, Ready for the Woods. Weight: 48,281 lbs. Width: 9 ft. 1 in Length: 26 ft. 4 in Height: 12 ft. 11 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 La Crosse WI, WI
NEF Equipment
855-251-2648
Call

$ 155,000

2015 Komatsu 895 Fowarder -18,300 hours -Tight and dry -780/50-28.5 tires 70% -Tracks are 30%. -Spare tire no rim

Josh Digirolamo
828-302-7264
Call

$ 185,000

2014 Komatsu 445XT-L Feller Buncher, Machine has 12,000 Hours, Engine is Cummins 8.3 300 HP, Quadco 22" 360 Degree Head, Undercarriage is 75%, Enclosed Cab with Heat and Air Conditioning, Leveling Cab, Ready for the Woods. Weight 72,091 lb Height 14' 1" Width 10' 8" Length 29' 0" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Mystic, CT
NEF Equipment
855-251-2648
Call

$ 49,995

2001 komatsu D39PX 5500 hours Winch Forestry package New rebuilt final drives 80% on tracks Runs great

Mitch Stevens
828-773-6986
Call

$ 174,500

2018 Komatsu PC290 LC-11 excellent condition, 2,640 hours, hydraulic thumb, 60" bucket. Price Reduced! $174,500

 Bloomfield, IA
Timber Harvest LLC
660-216-7168
Call

$ 510,000

2025 Komatsu 855 -175 hours -Just got the 150 service done -Needs nothing

Josh Digirolamo
828-302-7264
Call

$ 106,900

2015 Komatsu PC 170 LC Excavator 2700 hours Second owner Manual thumb Auxiliary hydraulics 30"bucket Backup camera Work ready

Mitch Stevens
828-773-6986
Call

$ 175,000

2015 Komatsu 430-3 Waratah -9600 hours -616C Head -Under Carriage done this spring -Hydraulic Oil cooler and reversing fan recently replaced Good working Machine!!!!!!

Josh Digirolamo
828-302-7264
Call

$ 219,500

2017 Komatsu D65PX-18, 4039 hrs., Stk# KM19457, Cab with heat and A/C 6 way blade Winch Komatsu SAA6D114E-6 engine, 217 HP 51,960 lbs Columbia, MO, $219,500

 Escanaba, MI
Roland Machinery Company
906-786-6920
Call

$ 229,500

2016 Komatsu WA500-7, 8447 hrs., Stk# KM19654, 9.8 yard bucket Komatsu SAA6D140E6 engine 353 HP 75,435 lbs Portage, IN, $229,500

 Escanaba, MI
Roland Machinery Company
906-786-6920
Call

$ 399,500

2022 Komatsu XT465L-5, 3,031 hrs., Cummins QSL9, late model Quadco 3200 360° head, 10” x 28 long single grouser pads 100%, Rollers, Sprockets, Idlers and Bushings all @ 80%, Fire suppression System, Back Up Camera, $399,500

 Greenland, MI
Pats Heavy Equipment
906-883-3800
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved