Hogs and Wood Grinders For Sale

Vecoplan RG 42/60 XL 60 HP Motor 15" Rotor 42" x 52" Hopper Opening 1" Screen This machine went through a rebuild. It was not big enough for the buyers application. Available immediately.

Vecoplan RG52-60 U Stretch Slow Speed Grinder 60 HP Motor No Control Panel

VECOPLAN RG 70/200K Shredder with Infeed Conveyor & Auger DischargeSpecifications: -- Hopper Opening: 70″ x 80″ -- Main motor: 200 HP -- Rotor diameter: 20″ -- Number of cutters: 84 (triple row) -- Size of cutters: 40 mm x 60 mm -- Rotor speed: 145 RPM -- Rotor diameter: 20″ -- Hydraulic Feed Ram: 10 HP - 2-Speed -- Throughput: 2,000 – 28,000 Lbs/Hr

VECOPLAN RG 52 Single-Shaft ShredderSpecifications: -- Vertical hopper feed; suitable for wood, paper, and plastic applications; 52" x 58" opening. -- 60 HP Rotor motor, power belt drive; 15" dia. high output "Torsion Point" cutting rotor with a (74) 4-way indexable, replaceable cutterknives. -- Rotor/cutter head grinds at approx. 120 - 140 RPM; average noise level 60 - 70 dbA. -- Includes: Heavy Duty construction stress-relieved shell and frame; tramp metal protection; oversized gear box and Heavy Duty roller bearings. -- Precision hydraulic "Process Ram" with: 5 HP, 2-Speed pump motor. -- Separate electrical Control Panel with push button controls. -- Machine weight: 10,000 - 12,000 Lbs.

VECOPLAN RG 42-40 SINGLE SHAFT SHREDDER w/Cart TipperSpecifications; -- 40 HP MotorVecoplan ShredderModel: RG 42/40 XL PVYear: 2007Motor: 40 HP, 460V, 60HZ15" Dia. rotorRPM: 1465Feed Opening: 42" x 48"Blades on rotor: 27Weight: 3,700 lbsIncludes: 2,000 Lb cap. cart tipper

VECOPLAN RG78-200 / VAZ 220/200 KNF SINGLE SHAFT SHREDDER (200 HP)Specifications: -- 200 HP Main Drive -- 20" Rotor -- Cutting Chamber Opening: 78" W x 86" L -- 460 Volt ElectricalFeatures: -- Hydraulic Ram Feed System -- Pneumatic Screen Opening -- Counter Knife on Air Springs (Tramp Metal Protection) -- Auger Discharge SystemCondition: -- Came Out RunningIdeal Applications: -- Wood Waste -- Plastics -- Paper / Cardboard -- General Recycling

Low Noise Grinder with Horizontal Feed; 50 HP Main drive motor, 16" diameter rotor with (24) 40 x 40 cutters; top & bottom knurled infeed rolls control feeding. -- 5" x 18" Infeed opening; 390 RPM rotor speed. -- Includes: (1) 18" Wide x 6" deep x 16' long vibratory horizontal infeed conveyor; sizing screen with 7/16" screen hole. -- Approximately 10,163 hrs. on this unit.

MLS Number 11342021 2008 Vecoplan RG32/20U Grinder/Shredder Single shaft grinder / shredder 80 DBA noise level 32 in. by 42 inch opening waste grinder with vertical 2 cubic yard hopper 20 HP rotor motor Equipped with10 inch rotor with 20 indexable/replaceable cutter knives Rotor / cutter head grinds at 95 R.P.M. Hydraulic pusher ram with 1.5 HP two speed pump motor Separate electrical panel with push button controls 80 DBA noise level 8 inch exhaust 8 inch hump magnet screen to produce ½ in.in size Handles 1,000 to 1,200 lbs./ hour depending on product mix and loading. Machine still operating. Will be available sometime in May/June 2022

Vecoplan VAZ 120/105 Hopper Fed Wood Grinder Infeed conveyor belt with incline conveyor

Vecoplan VTH 80-350 40 HP 460 volt 3-phase 3.5@ x 14” inlet 3/8” screen 14” x 16’ vibrating conveyor input Allen Bradley Controls Excellent condition

Vermeer HG365 Grinder New infeed roll and remote control Ready to go to work!

2013 Vermeer HG6000 -6000 hours -CAT C-18 engine -New material output belt that comes with it -Tires and lights good

2022 Vermeer HG6000 -950 True Hours -Mill like new -Infeed chain and discharge belt like new -Machine only ground up debris from curbs and municipal waste Machine is washed regularly and serviced when needed

2005 Vermeer HG6000 -2386 hours -C16 engine (630H.P) -Low hours on hammers -Low hours on the conveyor belt -Tires and lights good Ready to Grind Unit!!!!!!

2019 Vermeer HG6800TX -5500 hours -C-27 Engine -New Infeed Chain -New Sprockets -New Subfloor -Clean oil samples -Updated mill and Bearing Turn Key Grinder !!!!!!!!

2017 Vermeer HG6000 Horizontal Grinder -4,400 hours -C-18 -Belts good -No blowby Turn Key Unit

Manufacturer NV300 - With bilateral linear action providing profiling and straight knife grinding up to a max of 310 mm. Will shape and regrind moulder knives in the block and profile grind solid tipped heads. Suitable for HSS, Stellite and TCT. Max length of cutter profile 310 mm. Max dia of cutting circle 300 mm. Includes arbor, grinding wheel, stylus, 220 volt 3-phase

Weima WLB 1300 Horizontal Grinder 50 HP Motor System works, not currently in use, will need main bearing replaced.

WEIMA ZM-40 Quad Shaft 4-Shaft ShredderEquipped with: -- Dual drive motors - (2) 30 HP Drive motors. -- Hopper opening measures 51" x 55.1" (1,300 x 1,400 mm); cutting chamber opening of 30" x 27.6" (762 x 700 mm). -- Rotor length of 30" (762 mm); Rotor speed 25 RPM; cutting disc 11" (280 mm) diameter. -- Complete with: -- Control Panel with soft start and 16' cable bundle. -- Note: "Quad Shaft" Shredders, unlike Dual Shaft Shredders, allow shredded material to be circulated through the cutting chamber until it is small enough to pass through the sizing screen. -- Machine weight: 5,500 Lbs.

WEIMA WLK-25 SJ Super JUMBO SINGLE SHAFT SHREDDER -- Feed opening 98" x 76" -- Rotor Diameter 27" -- (246) Cutters -- 215 HP