Equipment For Sale

Dangle head link to fit Timbco 415 425 or 445 fellerbuncher boom. Exceptionally well made. One piece solid steel. Would also work excellent for a grapple.

Timbco/Valmet 445 track group, optionally low hours chains, reused pads that are in very good condition. 8 1/2 inch pitch 45 links.

Timbco 445D. The last of the mechanical machines. 8.3 Cummins, Rexroth pumps, Rexroth valve, in the woods operating today. Equipped with lateral tilt bar saw.

Parting out a Timbco 425C, good pumps, Vickers valves, undercarriage, finals, drive motor, engine and more. Let us know what you need shipping available.

Older Caterpillar Final drives available to fit Timbco 425 and 445 in good to excellent condition

2002 Timbco 820 Double Bunk Forwarder, Cummins 8.3 Engine, Rebuilt 2000 Hours Ago, Frame Hours 10.900, Enclosed Cab with Heat, AC doesn't work Ready for the Woods. Length 32 ft 4 in Width 10 ft 10 in Height 12 ft 0 in Weight 49,500 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Available for parts. Mid 90s Timbco 445B. Good finals, drive motor, pumps, swing motor, undercarriage and more. Please let us know what parts you need. Shipping available.

1997 Timbco T-415C, 8254 hrs., $42,900

1996 Timbco T-415C, 22,525 hrs., $69,900

45 Link Timbco 425 undercarriage in excellent condition. Low hours Little wear-24 inch single grousers

Older Timbco 425 final drives. Typically on machines that are pre-1998. Several to choose from many parts and drive motors available.

Timbco 445C with 360 Quadco hotsaw. Cummins engine, rexroth pumps. 28 inch single grouser tracks

Used Timbco/Valmet/Komatsu and Timberpro leveling cylinders available

Used Timbco/Valmet and Timberpro main/stick boom cylinders available

2006 Timbco 425EXL, 4794 hrs., Quadco QFH 22B Felling head, Espar Preheater, Cummins QSC engine, 28”x10” single grouser pads @ 85%, rollers @ 60%, sprockets, idles and bushings @ 60%, new paint, $109,500

Good working condition. Doesn’t come with the head that’s on it

Timbco 445B, Cummins engine, rexroth pumps, Cat finals, equipped with Timbco lateral tilt Barsaw. Priced to sell

2021 Timber Buddy Mill Operation Comparable to a Wood-Mizer LT70 Kauffman's laser edger 2 strand log deck like new Roller transfer deck like new

Timber Treatment Solutions designs and manufactures turnkey high pressure wood treatment plants for impregnating timber to Use Class 3, Use Class 4 and a variety of other requirements. These plants generally include: – - an autoclave with quick closing door(s) - one or several tanks to store the treatment chemical - a process skid, with all necessary pumps, valves, and pipes - a timber pack handling system, from completely manual to fully automated - a mixing / dosing system - a PC or HMI based control system with our latest plant operating system There are lots of possible configurations, and our teams will be able to advise the most suitable high pressure wood treatment plant for you, according to your needs and budget. Plants can be designed for any of the processes required by the timber impregnation industry: – - Bethel (full cell) – this is the most common for treatment of timber to Use Class 3 and 4 - Rueping (empty cell) – this process cycle is used for more specialist lumber treatments, such as creosote and copper oil, where the impregnation rate needs to be reduced on highly absorbent wood species - Lowry - Special cycles using any combination of vacuum, air pressure & fluid pressure phases, which can be designed on request WHEN TO USE HIGH PRESSURE IMPREGNATION High pressure treatment is widely used whenever deep impregnation of wood by a preservative required: – - Sawn or round posts using water-based copper chemicals (UC3 / UC4) - Poles, sleepers, posts using Creosote, Creosote/Oil mix, CuNap & Copper Oil - Construction timber with fire retardant chemical - For specific applications, such as resin or furfural impregnation before curing

Timber Treatment Solutions designs and manufactures turnkey low pressure wood treatment plants of any size which are suitable for use with any of the existing treatment chemicals on the market, whether they are water based or solvent based. These plants generally include: – - Autoclave or rectangular vessel with quick closing door(s) - One or several tanks to store the treatment chemical - Process skid, with all necessary pumps, valves, and pipes - Timber pack handling system, from completely manual to fully automated - Mixing / Dosing System - PC or HMI based control system with our latest plant operating system There are lots of possible configurations of low pressure plant, and our teams will be able to advise the most suitable for you, according to your needs and budget. Plants can be designed for any of the processes usually required by wood impregnation industry, such as Double Vacuum & Envelope WHEN TO USE LOW PRESSURE TREATMENT? Low pressure treatment is widely used, whenever light impregnation of wood by a preservative is required (also called surface treatment or envelope treatment): - To impregnate timber for Use Class 1, such as timbers that will remain dry (e.g. upper floor joists, truss rafters) - To impregnate timber for Use Class 2, such as timbers that are exposed to a slight risk of wetting or damp (e.g. tile battens, CLS framing) - To impregnate construction timber with fire retardant chemical