Equipment For Sale

Balestrini "MICRON" Slot Mortiser:Sprcifications -- Dual spindle system, (1) each side with tables and overhead holddown, 3 HP - 9,000 RPM spindles, (60 - 350) oscillations/Min, 18 mm collet dia. -- Capacity: 4-23/32" (120 mm) Max. length of slot, 3-1/8" (80 mm) max. slot depth, 1-3/16" (30 mm) max. slot thickness. - Hourly production rate of (500 - 800) slots.

BALESTRINI - "MICRON": Slot MortiserSpecifications -- Dual Spindle System (1) Each side with: Tables and overhead holddown; 3 HP - 9,000 RPM spindles; (60 - 350) oscillations/Min; 18 mm collet dia. -- Capacity: 4-23/32" (120 mm) Max. length of slot; 3-1/8" (80 mm) max. slot depth; 1-3/16" (30 mm) max. slot thickness.Hourly production rate: (500 - 800) Slots.

BALESTRINI 2 CAP Mortiser --Automatically mortises or bores round holes in chairs or case good --Specifications -- Twin tables with pneumatic holddown clamps, (1) on each side eliminating dead cycle time, 19" long tables tilt left or right 0ø to 20ø. --Equipped with & Features -- 3 HP - 9,000 RPM Spindle motor and 1 HP oscillation motor. -- Spindles are mounted on prismatic guides with adjustable bronze gibs and move by rack & pinion, -- (120) to (240) oscillations/Min; 4-23/32" max. oscillation length, -- 3-1/8" max. depth, 7/8" max. bit dia., 13 mm spindle collet dia.

BALESTRINI MINI C 2500 DOUBLE SIDED TEMPLATE PROFILE SHAPERSpecifications: -- (2) Offset shaping heads with 10 HP (7.5 kW), 230/460 volt three phase drives. (1 each side) -- Maximum reciprocating length 98" (2500 mm). -- Maximum height 7" (180 mm). -- Maximum width between spindles 8", and shaping heads are staggered for full end rounding. -- 1¼"; Diameter work arbors with 7″ under the nut capacity, and Spindle speed of 8400 RPM -- Hydraulic stroke of 9-3/4″ wide x 110″ long tee slotted work table, with feed speeds of 3 - 49 feet per minute (1-15 m/Min.) powered by 3 HP, 230/460 volt three phase hydraulic pump -- Overhead beam clamp bar with (4) adjustable clamps. -- Push button operator control station.

BALESTRINI - 2 CAP: MortiserAutomatically mortises or bores round holes in chairs or case good.Specifications -- Twin tables with: Pneumatic holddown clamps, (1) on each side eliminating dead cycle time; 19" long tables tilt left or right 0° to 20°.Equipped with & Features: -- 3 HP - 9,000 RPM Spindle motor and 1 HP oscillation motor. -- Spindles are mounted on prismatic guides with: Adjustable bronze gibs and move by rack & pinion. -- (120 - 240) Oscillations/Min; 4-23/32" max. oscillation length. -- 3-1/8" Max. depth; 7/8" max. bit dia.; 13 mm spindle collet dia.

Bandit 2650 Wheeled Stump Grinder, Remote Control, Good Running One Owner Trade In.

2010 Bandit 4680T Track Horizontal Grinder, Equipped with a Caterpillar C-27 1050 HP Engine,3700 Hours Currently, Undercarriage is 85%, Machine has 2" and 3" Screens, 2nd Owner, Wireless Control, New HG600 Clutch, New Head and Tail Shaft, New Conveyor Belt, Compressor on machine, Ready for Work. Weight 95,200 lbs Width 140 in Height 152 in Length 492 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2023 Bandit SG40 WALK BEHIND Stump Grinder with only 41 hours. Features an aggressive cutter wheel drive system, enhanced operator visibility, and enhances stability. Operator controls are mounted on a 3-poisiton console. Two joysticks control the travel of the unit, while a single, easy to use joystick controls all cutter wheel functions. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2003 Bandit Model 5680 Beast Horizontal Grinder, Engine is a Cat 3412E V12 Engine, 1000 HP, Has 13,000 Hours, Wireless Remote, Air Compressor, Pintle Hitch, Ready to Grind. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2004 Bandit 3680 Horizontal Grinder with only 2,667 hours. Equipped with a 566HP Caterpillar engine. New tires, New set of teeth. Excellent condition. Length: 37’ 3” Width: 11’ 7” Height: 12’ 2” Weight: 85,000 lbs. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2005 Bandit Model 4680 Horizontal Grinder, Tri Axle Machine, Cummins 1000 HP Engine, Hours Unknown, Will have hours soon, Radio Remote Control, 4 " and New 2" Screens for Regrind. Length: 36’ Width: 10’ 11” Height: 13’4” Weight: 93,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2020 Bandit 1425 Horzontal Grinder, Cat 120hp with 81 hours, Radio Remote, Magnetic Pulley, Extra Parts, Excellent Condition. Weight 12,500 lbs Width 98 in Height 120 in Length 288 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2006 Bandit 4680 Beast Recycler, Cat 3412 1,000hp with 6,000 hrs, 30 Tooth Mill, Radio Remote, Magnetic Head Pulley Length: 36’ Width: 10’ 11” Height: 13’4” Weight: 93,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2017 Bandit Beast 4680T -1800 hours -1050 hp Cat c27 -Spare New Screens -48 tooth mill -New overband magnet -Newer discharge belt

2014 Bandit Beast 4680 Track Horizontal Grinder, Equipped with a Tier 2 CAT C-27 1050 HP Turbo Diesel Engine with 3,500 Hours, Reverse Fan ,Compressor , Magnetic Pulley Head on Shorter Length Discharge Chute , Additional Screens all sizes, Undercarriage 95% Wireless Remote Control with Tether Cord Electric Winch for screen installation... Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2010 horizontal grinder/chipper mobile track 2800 hours New twin Disc clutch New conveyor New 3 stage pump New cutter mill drive belts Currently mill is converted to chip knives Have all cutterbodies, teeth, screens and gate to convert to grinding.

2014 Bandit 2550 Self Propelled Stump Cutter with Deutz 44 HP Diesel Engine, 1,450 Hours, Tether Cord Remote and Wireless Control, Dual Rear Wheels, Hydraulic Swing Speed, Two Speed Drive, Front Grading Blade, Ready for Work. Width: 35” (89cm) Height: 53” (135cm) Length: 120” (305cm) WEIGHT: Approximately 820kg Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Bandit SG-40 Stump Grinder, Rev Wheel, 38HP EFI, Good Running Machine.

2022 Bandit SG40, Low Hours, 38HP EFI Kohler, Tracks, Rev Wheel, Ready to go to work.

2011 Bandit Beast Model 3680, Caterpillar Model C-18 765 HP Turbo Diesel with Only 2,300 Original Hours , Magnetic Head Pulley on Discharge Conveyor, , Air Compressor, Wireless Remoter Control,and Tether Cord Control, Autofeed Reverse System, Tri-Axle Unit with Hydraulic Tongue Jack with Air Brakes... Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.