Equipment For Sale

2001 komatsu D39PX 5500 hours Winch Forestry package New rebuilt final drives 80% on tracks Runs great

MLS Number 13799443 2007 Komatsu PC300-7 Excavator 11,000 hours Engine rebuilt at 9400 hours New UC recently Rebuilt hydraulic pump All 4 cylinders repacked Documentation of work done recently Demolition grapple

2015 Komatsu 430-3 Waratah -9600 hours -616C Head -Under Carriage done this spring -Hydraulic Oil cooler and reversing fan recently replaced Good working Machine!!!!!!

A/C 1996 US EPA Label Steel Body Liner 23.5R25 Tires

2021 KOMATSU XT430-5 FELLER BUNCHER 4,400 HOURS QUADCO HEAD GOOD UNDERCARRIAGE CUMMINS QSL9 ENGINE 70,000 LB OPERATING WEIGHT VERY GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS NO PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

Komatsu D-335 Dozer -3712 original hours -Single tilt cylinder -Engine rebuilt and runs great -Undercarriage is 75% -Ready to go to work

2013 Komatsu 865 8WD Forwarder, Tracks All Around. Good running Machine.

Machine will have a hot saw on it for the sale.

Cab w/ AC, Drawbar, Low Ground Pressure, Smart Grade

2020 Komatsu XT430-5 -9000 hours -Logmax 7000XT -UC 70% -Tight and dry -Downsizing ready to work

KOMATSU D61PX-24 Crawler DozerProven, second generation D61PX-24 comes standard with a parallel link undercarriage system for long undercarriage life. In addition to E and P modes, a new H mode helps operators maintain ground speed while operating under heavy loads. Specifications: -- Engine: Komatsu SAA6D107E-3 Gross 127 kW 170 HP 2200 RPM -- Travel Speed: - 1st 0-3.4 km/h 0-2.1 mph 0-4.1 km/h 0-2.5 mph - 2nd 0-5.6 km/h 0-3.5 mph 0-6.5 km/h 0-4.0 mph - 3rd 0-9.0 km/h 0-5.6 mph 0-9.0 km/h 0-5.6 mph -- Number of track rollers (each side): 8 -- Fuel tank: 372 ltr 98.3 U.S. gal -- Weight: 18320 kg 40,389 lbs -- Hours:5200,Equipped with: -- Cab integrated ROPS (ISO 3471) High rigidity and superb sealing -- Hydrostatic Transmission (HST) control system -- PAT Dozer with Adjustable Pitch -- Comfortable Ride with Heated Operator Seat -- Cab Damper Mounting -- Parallel Link Undercarriage System (PLUS) -- Self-adjusting idler support -- Palm Command Control System (PCCS) Levers -- One-Pedal Design (Decelerator/Brake Pedal) Controls Speed, During Operation -- Selectable Working Mode -- Heavy-Duty High-Pressure Common Rail (HPCR) Fuel Injection System -- Komatsu’s New Emission Regulations-Compliant EngineNew parts: Brand new radiator Brand new chains, upper and lower rollers, and new pads. We can provide financing and also assist in the delivery to your location.

2015 Komatsu 430-3 Hot Saw, approx 10,000 hrs., Undercarriage @ 85%, $199,900 Trades Welcome

One owner, 4400 original hours, excellent maintenance history. Tier-3 engine - NO DEF Quadco Saw 22" with 360 wrist 32" Triple Grouser tracks (24” available)

2017 Komatsu 931XC Processor, Equipped with a C144 Processor Head, 10,800 Hours, New Main Hydraulic Pump, New Fuel Injection Pump, 1 Set of Eco Tracks, a second set of Evo Tracks on Rear, Ready for the Woods. Weight: 48,281 lbs. Width: 9 ft. 1 in Length: 26 ft. 4 in Height: 12 ft. 11 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2022 Komatsu 931XC Track Unit, Includes C-144 Processor Head Attachment, Computer System, ONLY 2,000 Hours, Pre Heater, Enclosed Cab with Heat and Air Conditioning, Machine is Like New Ready for the Woods. Operating weight 48,281 lbs Transport length 26.31 Transport width 9.8 Transport height12.92 Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2016 Komatsu 430 L -6,300 hours -Quadco 22B 360 head -UC 50% -2 idler wheels been done -Few small leaks -Tight machine -Turntable bearing is tight Ready to work

MLS Number 12588791 2019 Komatsu WA320-8 Wheel Loader 12174 hours Cab CWS log fork Galaxy 20.5R25 tires

2006 komatsu pc200-7 Waratah 622b processor -Rebuilt pumps about 4100 hours ago -Rebuilt motor about 4100 hours ago -80% under carriage -Sprockets idlers Boom cylinders were all repacked -622B Waratah Processing head -Has new monitor -New head module -New cab module -New saw motor -Machine Runs and works great And is dry Cuts up to 28"

Komatsu FD45T-7 Forklift 5.9 Cummins rebuilt 1k hours ago Approx 13k hours Single speed 10k capacity New batteries Work ready

KOMO - VR 510 TG Solution: CNC Router (ATC & Boring) -- Specifications5' x 10' Moving gantry; stationary table design in a front-to-back configuration with: 1-Zone phenolic vacuum plenum; (4) pop-up pins for sheet placement around perimeter.÷ Equipped with:(1) 12 HP - HSK-63F Type ATC spindle; variable speed from: 1,000 - 24,000 RPM; 10-station ATC tool carousel; (1) 9-spindle boring unit. -- All AxesUtilize FANUC brushless AC Servo motors; driving precision ball screws on the Y- & Z-axis; helical Rack & Pinion on X-axis. -- Ride-on Profile way-bearing Systems for:Rapid feed rates up to: 2,300 IPM Nn the X- & Y-axis; 1,200 IPM on Z-axis; motion components are serviced by an automatic lubrication system. -- GE-FANUC CNC Control with:WINDOWS Based control with: Color CRT screen; large hard disk for program storage; USB and RS-232 interface. -- LinearCircular & helical interpolation; automatic acceleration & deceleration; fast corner function; handheld teach pendant; absolute & incremental programming; feed rate & spindle speed manual override. -- Complete with:An assortment of HSK-63F toolholders; assorted collets; 25 HP TRAVAINI Vacuum Pump; documentation.