Harvesters and Processors For Sale

2007 John Deere 2054 Harvester with Waratah 622B Head, 17,768 hours, Recent pump, Recent sprocket and rails, New Waratah computer, runs great. Weight 69,187 lbs Length 45 ft 0 in Width 11 ft 10 in Height 10 ft 10 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2012 John Deere 3754D Processor -11,743 frame hours -Engine and pumps replaced at 9,000 hours -2014 Waratah 625C head -Undercarriage is good -Pins and bushings are tight

2020 JOHN DEERE 853MH HARVESTER 6,500 HOURS WARATAH 623C HEAD UNDERCARRIAGE IS AT 95% LIKE NEW CONDITION MACHINE HAS NEVER BEEN IN THE WOODS MACHINE WAS ONLY USED ON LANDING EXECELLENT CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS NO PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

2017 John Deere 1270G -12,500 hours -John Deere 415 Head -Getting head resurfaced and new head gasket -New EGR cooler -Tracks -Tight and dry

2008 John Deere 1470D, 10,755 hrs., $189,900

2018 John Deere 1270G, 10,221 hrs., $274,900

2018 John Deere 1270G, 6593 hrs., $397,500

2016 John Deere 1270E, 8206 hrs., $299,900

2015 Komatsu XT430-3 Logging Processor with 9,700 hours has a Wartah 616c head topping saw. Under carriage and the oil cooler recently updated. Have some spare head cylinders and a feed wheel motor to go with it. As well as a burnt parts machine with good track motors, final drives , stick cylinder, stick boom with tele boom. Good working machine ready for production! Length 25 ft 2 in Width 10 ft 4 in Height 11 ft 9 in Weight 62,240 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2015 Komatsu 430-3 Waratah -9600 hours -616C Head -Under Carriage done this spring -Hydraulic Oil cooler and reversing fan recently replaced Good working Machine!!!!!!

2013 Komatsu 941.1 Harvester with 10,520 hours. New hydraulic pumps for crane and drive also a new drive motor ar 10,200 hours. Equipped with a Komatsu 370.2 head, overhauled at 9,000 hours. A second 370.2 spare head is included. Operating weight 51,809 lb Transport length 26.5 ft Transport width10 ft Transport height 13 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

6-WHEEL HARVESTER 650/65-26.5 FRON TIRE - 700/70-34 REAR TIRES 2011 KOMATSU 370 24" PROCESSOR/HARVESTOR WITH ROTATING LIKE ATTACHMENT (SN: 370022438), COMPUTERIZED MEASURING FEED ROLS, TOP SAW

2017 Komatsu 931XC Processor, Equipped with a C144 Processor Head, 10,800 Hours, New Main Hydraulic Pump, New Fuel Injection Pump, 1 Set of Eco Tracks, a second set of Evo Tracks on Rear, Ready for the Woods. Weight: 48,281 lbs. Width: 9 ft. 1 in Length: 26 ft. 4 in Height: 12 ft. 11 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2020 Komatsu XT430-5 -5500 hours -Logmax 7000XT -UC 70% -Tight and dry -Downsizing ready to work

2006 komatsu pc200-7 Waratah 622b processor -Rebuilt pumps about 4100 hours ago -Rebuilt motor about 4100 hours ago -80% under carriage -Sprockets idlers Boom cylinders were all repacked -622B Waratah Processing head -Has new monitor -New head module -New cab module -New saw motor -Machine Runs and works great And is dry Cuts up to 28"

2022 Komatsu 931XC Track Unit, Includes C-144 Processor Head Attachment, Computer System, ONLY 2,000 Hours, Pre Heater, Enclosed Cab with Heat and Air Conditioning, Machine is Like New Ready for the Woods. Operating weight 48,281 lbs Transport length 26.31 Transport width 9.8 Transport height12.92 Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2013 Komatsu 931.1 stk# VT20025, 10,652 hours, 370.2 head, Schofield, WI, $200,000

2011 Komatsu 911.4, 7800 hrs., 6wd 710 tires 370.2 head, $189,000

2015 Komatsu 931.1, stk# BJCons, 6,487 hours, C144 head, Escanaba, MI, $295,000

2006 KOMATSU PC200LC LOGGING PROCESSOR -Rebuilt pumps -Rebuilt motor -80% under carriage -sprockets idlers Boom cylinders were all repacked -622B Warthoug Processing head -has new monitor -new head module -new cab module -new saw motor -Cuts up to 28" timber