Equipment For Sale

2022 Tigercat X822E -2,755 hours -Tigercat 5702 sawhead -HID lights -Webastos engine and hydraulics heater -FH400 undercarriage with 24" pads -Remainder of 3 years or 6,000hrs powertrain and hydraulics warranty which ends Aug,8th 2025 -$4,000 worth of spare hoses -Spare saw teeth and bolts -Oil filters -Machine is in like new condition

2005 Tigercat 822 Feller Buncher, Equipped with a Koehring 24" Hot Saw with 90 Degrees, Enclosed Cab with Heat and Air Conditioning, Engine is a Cummins 8.3 Diesel with 6,900 Hours, Undercarriage is 90%, Ready for the Woods. Length 13 ft 11 in Width 10 ft 0 in Height 11 ft 0 in Weight 52,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

USE COMPLETE TIGERCAT FRONT AXLE FROM A 724D. AXLE HAS BEEN INSPECTED AND IS IN GREAT SHAPE INSIDE AND OUT. 1400 JD AXLE. PART NUMBER BMO74. HAS 1400 JD RING GEAR AND PINION INSIDE WITH 1400 YOKE (1/2 INCH BOLTS) F0R MORE INFORMATION CALL GAVIN AT 601-410-3416 OR CALL/TEXT TIM 251-366-3237

724D drive MOTOR ATTACHED TO TRANS WILL SELL TOGETHER OR SEPERATE LEFT drive motor PN#AQ092 $4500.00/RIGHT DRIVE MOTOR PN#AQ093 $4500.00 + shipping Call Gavin 601/410/3416 Call or text Tim 251/366/3237 Located at 467 St. Peter’s st stateline ms 39362

620C Tigercat PARTS SKIDDER, good running engine

This head came off a burnt machine in working order

New inner planetary set for Tigercat LX830D

New inner planetary for Tigercat 830D and others, sells for about $4000, Will take $2200

2024 Tigercat 6900 -960 hours -Cat C-27 -On board air compressor -Full warranty still -Drag chains like new Using everyday!!!!

2020 Tiger Cat 890 -3714 hours -Gronevold auto grease system ($20k) -Twin train air horns -New OEM stick cylinders -New OEM heel cylinder -66” Timar extreme grapple -Major boom to stick upgrade completed last year -All warranty updates to be completed this week. Warranty until May 2023.

2004 Tigercat 822 -17500 frame hours -3500 hours on engine(8.3l Cummings)and hydraulic pump -UC 90% -Track motors and planetarys have low hours also -Boom is lined bored and has new pins and bushings -New swing bearing and rotary manifold -Has 5400 felling head on it and has a new style saw shaft on it -Cuts up to 21 inch timber More pictures of inside of cab coming soon!!!!

2017 Tiger Cat LX830D Feller Buncher -10146 Hours -New stick with new pins for stick 1700hrs ago -Resealed tool cylinder -New butt plate 1700hrs ago -New radiator 1500hrs ago -New tilt cylinder pins and bushing 1700hrs ago -Updated cooler -Complete new undercarriage about 2200 hrs ago -Has been serviced with fully synthetic oils -Ready to work

2023 TIGERCAT LX855E FELLER BUNCHER, C ST5702-26 FELLING SAW ATTACHED, SIRIUS RADIO, TELEMATICS, PRE-HEAT SYSTEM

2010 TIGERCAT H822C TRACKED FELLER BUNCHER 8.3 CUMMINS 5702B TIGERCAT HEAD

2014 Tigercat L870C Feller Buncher, Equipped with a Tigercat 5802 Head with 360 Degree, 14,000 Hours Enclosed Cab with Heat and Air Conditioning, Fire Suppression, New Saw Motor, One new grab arm, All New Cylinders, New Hoses, 1 New Final Drive Motor, Newer Engine Pump, New OEM, Undercarriage is Good, Ready for the Woods Operating Weight W/O Attachment 66,870 lb Overall Length 18.18ft in Overall Width 10.83ft in Height To Top Of Cab 10.83ft in Ground Clearance 2.33in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2007 Tiger Cat 822 Feller Buncher -15000 hours -Tight and dry -UC is in great shape..fairly new rollers,track chains and sprockets -5702 head (23 inch cut) -Disk in good shape Clean machine ready to go to work

2017 Tigercat 855D -9xxx -Tight and dry -5702 head -110 degree on head -Disk is in great shape

2017 Tigercat LX830D Feller Buncher -8,800 hours -330 hp Tigercat FPT C87 engine -No DEF -10 roller long track undercarriage is at 40% -23” hot saw head with 360 rotate -Wabasto pre-heater ONE OWNER MACHINE!!!!

28L tires, 5603 saw head, rebuilt hydrostat motors and drive pump, ready to go.

Our 724G is in excellent condition. It has only 5,200 hours on it, almost new 67x34x25 tires on it, and has no slack in any places that we’ve noticed in our short time of owning it. We just serviced it and have it ready to go to work. If interested in this machine text Kameron 251/242/5493 Tim 251/366/3237 Gavin 601/394/7796 The machine is located at Ala-Miss, Inc. our yard is 467 Saint Peter Street, State Line, MS, 39362