Equipment For Sale

Accepts material up to 12" x 12" and uses a 12"-wide conveyor Main Drive Motor: 30 HP TEFC Variable feed speed from 0-95 feet (0-29 m) per minute 28" Dynamically balanced solid metal band wheels 4" diameter dust outlet requires 500 CFM REDUCED LOW HOUR MILLWORK MACHINE

BBR-0 | Electric Drives | No Hydraulics | 30 HP Motors | 1992

Baker Dominator 3650E Sawmill Edmiston Edger Morbark Chipper with diesel engine All decks and rollers

Baker Products’ Self-Dumping Steel Hoppers can be used to collect almost anything. It has a reinforced base and continuous weld. When the hopper is full, you can easily pick it up with almost any forklift and dump it simply by pulling a lever. It has a lock, so the load will not dump by mistake. The Baker Self-Dumping Steel Hopper is a convenience every company should have. A. 2 yd (1,828 mm) 603 lbs. (274 kg) B. 2 yds (1,828 mm) 805 lbs. (365 kg) C. 3 yds (2,743 mm) 971 lbs. (440 kg) A. 44” (111.8 cm) 59” (150 cm) 69½” (176.5 cm) B. 45½” (115.6 cm) 57½” (146 cm) 64½” (163.8 cm) C. 55” (139.7 cm) 58” (147.3 cm) 71” (180.3 cm) Forklift Opening: 2½” (6.4 cm) high by 48½” (123.2 cm) wide

Model C 20 HP W Return Over Head Side Power Rollers

Baker C Resaw with Return. Located in NY. #C929

Baker Band Resaw Return conveyer 480 volt 3 phase 6" x 12" capacity

Baker single head resaw, Model; BBR-O, Serial#; 04-3371, has tilting infeed belt w/ digital display, electric drive, includes spare parts/ blades, excellent condition

3 phase/480 volt, excellent condition

BAKER C 4-HEAD Horizontal Resaw w/Powered Return6" Wide x 12" high cap. Resaw; standard spring blade tensioning system;Specifications: -- 13'-2" x 1-1/4" x 0.035 blade provides thin kerf savings; quick & easy blade height adjustments. -- Wheels: 28" Dia. CNC machined, dynamically balanced, all-steel band wheels, (4) bolt flange; rough top feed belt combines with opposing side feed rolls and air pressure hold over rolls; idler hold downs . -- (4) 20 HP Total Enclosed Fan Cooled Motors; Thin-kerf technology and the Baker Low Profile Flat Guide System generates up to 60-70% less sawdust and up to 25% more boards, easily out-producing a gang rip. Complete with: -- Hydraulic variable feed speed from 20 to 120 FPM (6 to 36 MPM) with a tank, flow control and remote feed shutoff; powered side feed rolls. Includes: -- Powered conveyor, powered return conveyor, NEMA electrical panel with the starters, motor overload protection, remote start/stop stations.6" x 6" Square dust collection with a 90° adapter chute to a 4" dia. outlet (can be rotated in (4) directions); 600 CFM required for each drop.

Baker Furnace Dry Kiln 110volt 3 phase Excellent condition

480V | Model # BDD-O | Serial # 19-552

2 strand transfer deck, 28" wide x 14' long, #80 roller chain, no drive, good condition

480V | Model # BBR-0 "A" | Serial # 09-4089

Model 3650E with Baker (3) Strand Infeed Deck Excellent condition Hydraulic over electric general factory networks. Hooked up to power and ready to be demonstrated.

New Fuses | New Main Breaker | Hydraulic Drive | Comes with 50 Blades

12" capacity 25HP motor 460 volt 3-phase

Dry Kilns (cream), Conventional Heating System, 600,000 BTU Propane, single phase, 120V control voltage, 3 phase 208V motor voltage, open volume: 672 cubic feet, max operating temperature: 500F, owners manual included, excellent condition, 2 units available

Baker Furnace Inc Dry Kiln 3 phase 110V

Baker Furnace Inc Kiln 110V 3 Phase