Equipment For Sale

Komatsu 400 series Feller buncher Final Dr. in excellent condition all inclusive

Valmet/Komatsu fellerbuncher footpedals sold separately or as one complete unit. Very good condition.

MLS Number 13686616 2014 Komatsu WA380-7 Wheel Loader 18429 hours Cummins 6.7 Goodyear 23.5R25 tires 75%

Specialty harvester booms to fit Komatsu fellerbunchers. Exceptionally long reach. Complete set available. Call for pricing. In excellent condition.

2022 Komatsu XF875-1 Forwarder, 5200 hrs., tracks available, very nice machine, $329,900, Trades welcome

2015 Komatsu XT430-3 Logging Processor with 9,700 hours has a Wartah 616c head topping saw. Under carriage and the oil cooler recently updated. Have some spare head cylinders and a feed wheel motor to go with it. As well as a burnt parts machine with good track motors, final drives , stick cylinder, stick boom with tele boom. Good working machine ready for production! Length 25 ft 2 in Width 10 ft 4 in Height 11 ft 9 in Weight 62,240 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2025 Komatsu 855 -175 hours -Just got the 150 service done -Needs nothing

2020 Komatsu WA270-8, 1072 hrs., Bucket, Forks, EROPS, Heat/AC, generally stored indoors, used for snow removal, and a little bit of unloading freight, and loaded sand a time or two, meticulously maintained, $149,000

2018 Komatsu PC290 LC-11 excellent condition, 2,640 hours, Hydr thumb, 60 in. bucket. $184,000

KOMATSU D61PXi-24 Crawler DozerSpecifications: -- Engine: 126 kW / 169 HP @ 2.200 rpm (Turbocharged) -- Max. travel speed: 5.59 MPH -- Blade type: Straight -- Hours: 6,525Equipped with: -- Joystick operator controls -- IMC / GPS Machine -- A/C and Heated Enclosed Cab -- 6-Way Blade -- U-C is 65% Remaining -- Grade control -- Oscillation -- Drawbar -- Air Ride Seat

2019 Komatsu 138 Excavator, 3500 Hours, Hydraulic Thumb

2015 Komatsu 430-3 Waratah -9600 hours -616C Head -Under Carriage done this spring -Hydraulic Oil cooler and reversing fan recently replaced Good working Machine!!!!!!

KOMO VR 510 MACH II S 5' x 10' CNC Router, with ATC, Boring, & Vacuum Pump – 7,640 Hrs. only (As of 10/12/23)!Specifications: -- Table size 60" x 120" x 32" H, with Table thickness 2". -- Travels: X-Axis 135", Y-Axis 84", Z-Axis 11". -- Positioning speed: X & Y-Axis 3,150 IPM & Z-Axis 600 IPM. Equipped with: -- Moving solid cast-aluminum single-zone vacuum "Matrix" table, with Front-to-back configuration & (4) Pop-up location pins. -- OMLAT "103909" 12 kW (16 HP) - 24,000 RPM HSK-63F Air-cooled electrospindle; Variable spindle speeds to 24,000 RPM. -- 12-Position Carousel-type automatic tool changer.Features: -- Boring unit, with (13) Pneumatically-actuated vertical spindles, (8) in X-Axis & (5) in Y-Axis, & (6) Horizontal spindles, (2) (1 + 1) in X-Axis & (1) (1 + 1) in Y-Axis. -- All Axes with THK Precision contour linear guideways, Closed loop AC Servo drives, & Precision ground ball screws. -- Automatic lubrication system. -- Heavy-duty bridge. -- Automated tool length measurement. -- Closed loop counterbalance system.Operator Control: -- GE/FANUC "210-I" CNC Control, with 10.4" Display, RS-232 Port, Remote pendant control, (3) Axes simultaneous control, Linear & Circular interpolation, Network compatible, Background editing, Self-diagnostics, High speed, High precision machining function, Canned cycles, Absolute & Incremental programming, Inch/metric capability, Cutter & tool length compensation, and Feed rate & Spindle speed override.Complete with: -- (5) Toolholders. -- QUINCY "QSV-40 ACN3A" 40 HP Rotary Screw Vacuum Pump, S/N UNO49552, with 22,334 Hrs. (As of 10/12/23).

//This machine is in an Auction on exfactoryauctions.com// //Link to machine: http://exf.ac/i63 The Flex Series of CNC routers from Komo Machine has been developed specifically for the customer who expects the utmost in technical quality and reliability at an economical price. These machines feature a moving gantry configuration and a side-mounted tool changer. Features: Four-pole, 16HP (12kw), 24,000 RPM, HSK 63F, fan-cooled spindle, 12 position automatic tool changer with aggregate capability, Air blast for optimal dust/chip evacuation and cooling of the cutting tool, Advanced Fanuc HVI servo system tuned for optimum acceleration and deceleration, Fanuc Panel i control with integrated PC 19" color display Construction, FEA "Finite Element Analysis" engineered structure, Heavy-duty steel fabrication Specifications Spindle: 1 Spindle RPM 16HP (12kw), four-pole, fan cooled Up to 24,000, fully programmable with HSK 63F taper. Table: 60" x 144" (1524mm x 3658mm), Four (4) 1" (25mm) part location pins Aggregate-Capable Tool Changer: Max 12 tools, Max Dia. 3.25" (82mm) positions full; 6.5" (165mm) adjacent positions empty, Max weight 12 lbs each / 80 lbs total (5.4kg / 36.4kg) Max Length 5" (127mm) Feed Rate/Traverse: X-Axis 2500ipm (63.5mpm), Y-Axis 2500ipm (63.5mpm) Z-Axis 1200ipm (30.5mpm), Acc/Dec83.3 in/sec² Axis Travel: 149" (3784mm) x 82" (2082mm) x 8.5" (215mm) Positioning: ±0.0008" (0.02mm) linear axis repeatability accuracy Control System: Fanuc Panel i With integrated PC and 19" color display Dust Collection Interface: 6" (152mm) diameter (recommended volume 900 cfm) Includes: Dekker Vacuum Pump NOTE: The above specs are taken from literature and considered accurate. As always please take advantage of the inspection period to verify. Items seen in the background are NOT a part of this Lot.

KOMO MHS AUTOMATIC VACUUM PANEL FEEDER: -- Specifications: Single vacuum Infeed & Rake-Off system for Nested Based CNC Router operation.Designed for loading of a 5' x 10' (61" x 128") panel cap. CNC Router and can handle material up to that size; Load/Rake cycle time is approx. (25) Seconds. -- Operating Process:A fully Automatic sheet Feeder and Unloader. Designed for a single bunk application and the ability to load from 3 sides.As it moves the sheet over the router table the previously nested parts are pushed onto a conveyor or sorting table, the dust is cleaned from the router table by the dust collection on the front of the gantry and the new sheet is Squared up on the router table.Full Bunk of material is loaded into staging area constructed of tubular steel with cross-support and safety guides to properly position bunk, preventing damage by Forklift operator to loader base.Loading is performed via a vacuum cup system with (4) rows of adjustable vacuum cups, (2) cups per row; front-to-back spacing is fixed and cups are adjustable left-to-right.Material is picked up from the top of the stack and loaded onto the router table, pusher arms at front & right side square the material onto the table.After machining, the vacuum lift picks up another sheet for processing; as it brings it over the side, squaring arm rakes the processed panel and skeleton onto a side table. PLEASE NOTE: This unit will need to be integrated with the controller of your current CNC Router. Actual Model is KOMO MHS.

Komo VR508 CNC Router 60" x 120" Table 25 HP Sullair Vacuum Pump Dust Collector (10 or 15 HP - need to confirm) (2) Two main router heads with Quick Change (2) Vertical Drill Units (1) 8 HP 10" Saw Fanuc Control

Komo VR512 CNC Router Fanuc Controls SN 24129-03-01-93 Quincy Vacuum Pump

KOMO - VR 510 TG SOLUTION: CNC Router (ATC & Boring) -- Specifications5' x 10' Moving gantry; stationary table design in a front-to-back configuration with: 1-Zone phenolic vacuum plenum; (4) pop-up pins for sheet placement around perimeter. -- Equipped with:(1) 12 HP - HSK-63F Type ATC spindle; variable speed from: 1,000 - 24,000 RPM; 10-station ATC tool carousel; (1) 9-spindle boring unit. -- All AxesUtilize FANUC brushless AC Servo motors; driving precision ball screws on the Y- & Z-axis; helical Rack & Pinion on X-axis. -- Ride-on Profile way-bearing Systems for:Rapid feed rates up to 2,300 IPM on the X- & Y-axis; 1,200 IPM on Z-axis; motion components are serviced by an automatic lubrication system. -- GE-FANUC CNC Control with:WINDOWS Based control with: Color CRT screen; large hard disk for program storage; USB and RS-232 interface. -- LinearCircular & helical interpolation; automatic acceleration & deceleration; fast corner function; handheld teach pendant; absolute & incremental programming; feed rate & spindle speed manual override. -- Complete with:An assortment of HSK-63F tool holders; assorted collets; 25 HP TRAVAINI Vacuum Pump and documentation.

2012 Komptech Cribus 2800e Trommel -4735 hours -74hp -1/2 1-1/4 in -7ft 2inch drum -Complete records on machine -Will produce up to 220 yards cube per hour

2013 Komptech Cribus 2800E trommel screen with 4,735 hours. Diesel generator Tier 3 for 480V/60 hz power socket for external power supply 480v/60Hz drums: 1/2" & 1-1/4". Power socket external supply towable, new fines cleated sidewall belt Oct 2020, new belly belt Aug 2020. Operating Weight 35,274 lb Length 34ft 9in Width 8ft 4in Height 13ft 1in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.