Equipment For Sale

2022 Bandit 4680T Beast Recycler, Cat C32 1200 hp with 218 hours, Radio remote, Magnetic head pulley. Weight: 92,000lb Length:624 in Width:139 in Height:162 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2014 Bandit 3680 Beast Recycler, Cat C18 with 3088 hours, Radio remote, Magnetic head pulley, Pintail hitch, Tri Axle. Length: 44’ Width:10' 10" Height:13' 6" Weight: 62,500 lbs. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2007 Bandit 1590 18” Drum Chipper, 140hp John Deere with 5000 hours, Winch, Telescoping tongue, Cone holder, Hand crank turn and height adjustable discharge, Lift cylinder, Auto Feed, New engine harness, Just serviced and tires, One owner in very good condition ready to work. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2023 Bandit 2590 Whole Tree Chipper -300 Hours -CAT C18 755H.P -Deleted NO DEF -All the bells and whistles. -Just serviced -Remote -Reversible knives

Bandit 4680T Horizontal Grinder, Excellent Condition with very low hours, ready to work.

C18 Engine Warranty until 2028 or 5000 hours. Currently working in woods, hours will go up.

2020 Bandit 19XP Chipper, Equipped with a Caterpillar 174 HP 6 Cylinder Turbo Diesel Engine, ONLY 1,500 Hours, Hydraulic Dual Rear Stabilizers, Hydraulic Tonge Jack, Hydraulic Winch, Telescoping Tongue Cylinder, Hand Crank Height Chute, Hydraulic Swivel Discharge Chute, Autofeed, Alloy Rims, Stainless Steel Tool Boxes, Extra Optional Hardware Tool Handler Package, Heavy Duty Bandit 21XP Undercarriage Modell Electric Brakes, Tandem Axles Ready to Work. Length: 20’ 9” Width: 7’ 9” Height: 9’ 2” Weight: 10,500 lbs. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2007 Bandit 250XP Chipper, Engine Meter is tough to read, Runs Solid, Hydraulic Winch, Telescoping Hitch, Autofeed, Caterpillar 140 HP Engine, Live Hydraulics, Hydraulic Lift Cylinder, Hand Crank Height Chute, Aluminum Tool and Battery Boxes, Electric Brakes. Length: 18’ 6” Width: 7’ 1” Height: 8’ 6” Weight: 7,200 - 7,800 lbs. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Barberan UV Oven

BARKER 600 HP BOILER, BIOMASS-FIRED: -- BARKER Boiler and Fuel System built & tested in 2011 as a pilot unit. Successful testing has been completed. This surplus equipment includes the following main features: -- Combustion Temp Capability- 2,000 deg. F.; Steam Flow 24,000 lbs/hr saturated; Steam Pressure 1,500 PSI @ 600 deg. F. -- Fuel Feed rate - 3,000 Lbs/hr at 1/4" biomass (5% moisture) -- Heat Input - 7,500 btu/Lbs HHV @ 22 mmbtu/hr. -- All equipment has less than 2,500 actual operating hours since installation.EQUIPMENT MAJOR COMPONENTS: Combustor, Cyclonic combustion technology, Refractory lined Heat Recovery. Steam Generator. Rotary Drum Dryer for Fuel drying - capable of 30% moisture reduction (at the above combustion parameters) and 1.5 tons per hour (installed as used equipment).BALANCE OF PLANT FUEL FEED SYSTEM: Live-bottom bin, Bunker, Feed conveyors, Wood hog, Vibrating screen, Drag and screw conveyors. Boiler water system - feed pump, water and steam piping Emissions Control: All required bag houses (SJVUAPCD) California permitted. -- Now REDUCED PRICE from $1.5 million !!

one owner machine, mounted on self propelled carrier, saw hook up's, perfect condition!

NEW Barko 295B Loaders, Carrier Packages Available - IN-STOCK!

1998 Barko 160A Log Loader, New John Deere Engine (1000 Hours), Saw Hydraulics, 5th Wheel Trailer, New Boom Pins, Cylinders Packed, Nice!

New Barko 80 XLE Loaders IN-STOCK!

2021 Barko 595B, 3860 hrs., hydrostatic, 52” Barko grapple, Rsquared 5628 Delimber, CSI 4400 groundsaw with extension, 2021 Pitts Trailer, Ready to go to work,

2021 Barko 595B, 3800 hrs., Hydrostatic, R squared 5628 Delimber, 52” barko grapple, CSI 4400 slasher ready for the woods, $185,000

2014 Barko 595ML Log Loader -12917 hours -Cummins -Hydraulic Kodiak series 3 trailer -No slack, tight turn table -Cold A/C -Heat -Radio everything works

2009 BARKO 640 Forestry Mulcher with 3,430 hours. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2012 BARKO 295ML LOG LOADER 4,529 HOURS GROUND SAW TRUCK MOUNTED JOYSTICK CONTROL VERY GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS NO PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

2008 BARKO 295 ML MAGNUM SELF PROPELLED LOG LOADER 1,553 HOURS SAVAGE SELF PROPELLED TAILER 5TH WHEEL FOR TRANSPORTATION RECENT SERVICED VERY GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS NO PAYMENTS WITH GOOD CREDIT GRANITEHE.COM