Excavators For Sale
202 Results Found
$ 109,900
2023 Deere 85G Steel Track Excavator, 443 Low Hours, New Hydraulic Thumb, Enclosed Cab, Very Nice Unit, Loaded With All The Options.
$ 80,000
32" Pads, 36" Bucket, Aux Hydraulics, Cab w/ AC, Cntrl Pattern Select, Less Bucket, Long Arm, Wide Pads, Wide Track
$ 80,000
32" Pads, 36" Bucket, Aux Hydraulics, Cab w/ AC, Cntrl Pattern Select, Less Bucket, Long Arm, Standard Boom, Wide Pads, Wide Track
$ 83,900
2006 Deere 160C LC Excavator, 3700 Hours, Amulet Progressive Hydraulic Thumb (Just Added), Manual Pin Grabber, 3 Buckets, 1 yd, 3/4 Yd, 4 Clean Out Bucket, New Undercarriage, All Service Records Included, Please Call For More Info
Call for Price
JOHN DEERE 85G Mid-Sized ExcavatorNeither too big nor too small, these right-size excavators are the perfect solution for a wide varietyof tasks.Specifications: -- Engine: Net Power 56.9 HP at 2,000 rpm ( (ISO 9249) 42.4 kW) -- Engine Cylinders: 4 -- Powertrain: 2-speed propel with automatic shift - Low 3.1 km/h (1.9 mph) - High 5.0 km/h (3.1 mph) - Drawbar Pull 6650 kgf (14,661 lb.) -- Swing Speed: 10.5 rpm -- Fuel Tank 31.7 gal -- Hours: 710Equipped with: -- AC and Heated Cab -- Front blade -- Multifunction, color LCD monitor -- 2-speed propel with automatic shift -- Electronic engine control -- Reduced-drift valve for boom down, arm in -- Auxiliary hydraulic valve section -- Work lights: Halogen / 1 mounted on boom / 1 mounted on frameThe 85G comes equipped with an independent-swing boom that enables work close to curbs, parallel to structures, or alongsidetraffic. We can provide financing and also the most economical delivery to your location.
$ 240,000
$ 240,000
32" Pads, 42" Bucket, Cab w/ AC, Mechanical Thumb, Short Arm, Standard Boom, Standard Track
$ 69,200
2015 John Deere 85G Mini Excavator with 3,052 hours. Operating Weight 17,952.3 lb Overall Width 7.62ft in Transport Height - Maximum 8.83ft in Transport Length Mono Boom 20.9ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
$ 65,000
$ 60,000
2011 John Deere 225D LC -10156 hours -Undercarriage 60-65% -Main bearing tight -Needs ac fan -2 main cylinders need packing -New felco thumb Runs and operates as it should
$ 110,000
2004 John Deere 2554 Road Builder -Just under 14000 hours -UC 80% -Was previously a stroker and converted it to an excavator -270D model excavator was burnt up so took the boom and stick from it and put it on this -That excavator only had 6200 hours in it so the boom is in very good shape. -All hoses from the boom to the machine are brand new -Most of the hoses on the boom to the stick are also replaced and new -All cylinders have been rebuilt -Pumps are not original and have been replaced at some point Ready to work
$ 100,000
2020 John Deere 85G -Bought new one owner -Very well maintained -Everything works -1700 hours -Steel rails -Rubber pads -Hydraulic thumb -36” bucket -19k lb machine.
$ 120,000
2005 JOHN DEERE 225C EXCAVATOR WITH RYANS HEAD Ryans head -37 inch bar head machine PRICE REDUCED -Drives been replaced at 10000 hours -Under carriage a 75 % -Dozer tracks about 75% life -High cleats -Hydraulic pump was replaced at 10000 hours -Tight and dry being serviced this week
$ 27,500
$ 59,000
$ 24,500
1998 John Deere 892D-LC Excavator with 8444 hours, Thumb, The oil cooler needs some work. Weight: 65,983 lbs Length: 36.17 ft Height: 11.17 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
$ 77,000
$ 47,900
John Deere 690E with Processor head Waratah 620 head Waratah computer Spare parts head available 17k frame hours Motor and pumps were redone 4k hours ago UC at 80% Runs and operates good
$ 89,500
Call for Price
JOHN DEERE 470G LC Large Hydraulic ExcavatorSpecifications: -- Max. digging depth: 27'-2" to 29'-11" -- Engine: JOHN DEERE 6135HT997 -- Displacement: 13.5 L -- Cylinders: 6 -- Fuel type: Diesel -- kW: 560 -- Transmission: Hydrostatic 2-speed travel -- Tracks Width: 35-1/2" -- Stick length: 12'-5" -- Quick coupler: Hydraulic -- Bucket width: 60" -- Hours: 4,602Equipped with: -- TOPCON 3DMC Control -- Operators station: EROPS -- AC and Heat -- Grade control -- Counterweights -- Auto lube -- Cutting Edge: Weld-On -- Grouser Pads: Triple