Equipment For Sale

2006 John Deere 1010D, 9760hrs., supergrip bucket, preheater, blade, Tire are size 600/65-34 on front 600/55-26.5 on rear, all tires about 60%, inframe done on motor less than 100 hours ago by AIS, Deere Dealer, $89,500

2017 John Deere 1210G, 8767 hrs., 2 speed hydrostat trans., Nokian Forest King tires size 710/45-26.5 at roughly 85%, CF 785 crane w/squirt boom, preheater, has IBC technology, DEF, the new drive system installed, $239,500

1997 Deere 548G Skidder with 20,567 hours. Includes winch and blade. Weight:21,740 lbs. Length:20.77 ft Width:9.85 ft Height:9.88 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Cab w/ AC, Hydrostatic Trans, Standard Track

Bucket And Forks 4750 Hours Recent Rebuild Eng.

2014 Deere 1910E Forwarder, Strong Engine, Has 27,000 Frame Hours, Motor Replaced at 13,000 Hours, Pumps at 7,000 Hours, Drive Motors replaced at 7,000 Hours for Preventative Measures, Slew Bearings and Brass replaced at 9,000 Hours, All Cylinders except Steering Cylinders Replaced at 5,000 Hours ago, Extension Boom and Bucket Replaced Newer Front Window Replaced, New Bucket, Good AC and Heat in Cab.7 New Nokian Tires Replaced the last 4.500 Hours, Boggies, Differential and Planetaries drain clean. Weight - 48,060 lb Length - 35' Height - 12.8' Width - 10.15' Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2020 John Deere 437E

Complete knuckle hanger, rotate motor and swivel in boom.

JOHN DEERE 85G Mid-Sized ExcavatorNeither too big nor too small, these right-size excavators are the perfect solution for a wide varietyof tasks.Specifications: -- Engine: Net Power 56.9 HP at 2,000 rpm ( (ISO 9249) 42.4 kW) -- Engine Cylinders: 4 -- Powertrain: 2-speed propel with automatic shift - Low 3.1 km/h (1.9 mph) - High 5.0 km/h (3.1 mph) - Drawbar Pull 6650 kgf (14,661 lb.) -- Swing Speed: 10.5 rpm -- Fuel Tank 31.7 gal -- Hours: 710Equipped with: -- AC and Heated Cab -- Front blade -- Multifunction, color LCD monitor -- 2-speed propel with automatic shift -- Electronic engine control -- Reduced-drift valve for boom down, arm in -- Auxiliary hydraulic valve section -- Work lights: Halogen / 1 mounted on boom / 1 mounted on frameThe 85G comes equipped with an independent-swing boom that enables work close to curbs, parallel to structures, or alongsidetraffic. We can provide financing and also the most economical delivery to your location.

2016 John Deere 803MH Processor with 10,000 hrs, 622B Wartah Head with a 3/4 chain on the main saw and 404 chain on the top saw. Has the updated hydraulic pumps, Air ride seat, XM radio, Touch screen monitor, The head had the pins and bushings replaced, everything is nice and tight, It comes with a oregon sharpener and extra chains and bars. Operating Weight 66,888.3 lb Height Over Cab 135.04ft in Length Of Tracks 15.13ft in Width 10.76ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2022 John Deere 748L-ll -1655 hours -Tires @ 70% -Lights work -Tight and dry

2009 John Deere 648H

2023 John Deere 748LII -1741 hours -44 inch rubber -Winch -Sweeda axles LIKE NEW!!

#200 • 2012 John Deere 444J Loader Center to Center of Pins: 39.5''. Engine: SN: PE4045T596162, MN: 4045TF275. Transmission: 4 speed. Fuel: Diesel. Meter Reads: 9,584 hours. -- Features -- 3rd Valve: Yes. Attachment: Forks. Quick Attach: Hydraulic. ROPS: Closed. Tire Size: 17.5R25. Heat: yes. -- Seller Statement -- Seller only had loader a couple month, Engine was replaced seller not sure when, seller says very good condition, 6’’ x 38’’ JRB forks. Free loadout.

32" Pads, 54" Bucket, Cab w/ AC, Short Arm, Standard Boom, Standard Track

35.5 Tires, Cab w/ AC, Direct Drive Trans, Dual Funct Grapple, Heavy Duty Axles, Lever Steer, Limb Risers, Stacking Blade, Winch

Early Timbco T425 with rexroth pumps, cat finals, Poclain swing motor, Cummins powered- all parts available. Shipping available. Parting out, let us know what you need.

2015 John Deere 648H, 11,232 hrs., has been thru shop with replacements and new parts, $97,500

John Deere 700K dozer right and left final drives in good condition

91- 648D salvage machine, lots of good parts!