Equipment For Sale

Automated push feed saw system for fast and accurate cutting of wood and plastic Adjustable cutting envelope so you can set the envelope to the needed width of the material you are cutting, whether single piece or pack Tigersaw 1000's Dynamic Optimization software give you the best yield by determining the optimal cutting order from your parts list (Will cut the mark) Value based optimizing allows the operator to value items in a cut list individually Download parts files to Tigersaw 1000, comes with TigerLink 6 (Tigerstop's cut list downloading software) Accuracy: +/- .012" Push capacity: 90 lbs.(on flat tables) Cutting envelope with 450 mm blade: 1" x 16" up to 5" x 6" Cutting envelope with 500 blade: 1" x 16" up to 6" x 6" Maximum clearance length for loading: 12' Material feeds right to left 24" wide x 18' long flat infeed table 24" wide x 12' long roller outfeed table Complete guarding of the saw blade area, safety interlocked guard door and saw blade door (neither can be opened while running) Saw motor: 10 hp Dust collection requirements: 600 cfm (4" dust port) Air requirements: 85 psi (water and oil free air) Electrical: 15 full load amps on 460 volt INCLUDES: Tablet package: TigerTouch software loaded onto a Surface Pro tablet. Includes downloading software (DNLD), Dynamic optimization software (OPT), and TigerSET software (SET). Label printer

2018 Tigercat 1185, 4353 hrs., TC FPT N67 Tier 4F Engine, rated at (230 KW) 308hp, Tigercat Extreme Duty pump drive, trans., and hydraulically balanced bogie axles, $395,000

2015 Tigercat 234

2009 Tigercat 620C

2018 Tigercat 720G Feller Buncher with 6900 hours, Tight and Dry Machine, Disk 75%, Tires 75%, New packings in cylinders, One owner. Weight 34,250 lbs Length 24 ft 0 in Width 8 ft 4 in Height 11 ft 0 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2005 Tigercat 822 Feller Buncher, Equipped with a Koehring 24" Hot Saw with 90 Degrees, Enclosed Cab with Heat and Air Conditioning, Engine is a Cummins 8.3 Diesel with 6,900 Hours, Undercarriage is 90%, Ready for the Woods. Length 13 ft 11 in Width 10 ft 0 in Height 11 ft 0 in Weight 52,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Bogie dual arch grapple skidder

36" Triple grouser pads, low hours for age, well cared for. engine rebuilt at 10k hours

2009 Tigercat 822C Processor with 24,000 hours. Includes a Logmax 7000 Processor Head, Machine Runs Stong, Undercarriage 60%, Version 5 Computer, Engine was rebuilt at one time, Heat and Air Conditioning in Cab Ready for the Woods. Operating Weight W/O Attachment 54,000 lb Overall Length 14.59ft in Overall Width 10.93ft in Height To Top Of Cab 10.93ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2013 Tigercat 620D Grapple Skidder, Winch, Has Cummins Engine, 1,250 Hours, Tires are 35.5, Dual Rings on on Rims, Enclosed Cab with Heat Air Radio, Every Pin and Bushing Replaced on the machine, New Parking Brake, Glass is Good, Exhaust Good, All Arch Pins Lined and Re-bored, Ready for the Woods. DIMENSIONS with standard tires and arch LENGTH 23'9" WIDTH 11' HEIGHT 10'4" WEIGHT 36,250 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2012 Tigercat 822C Track Harvester with 12,654 hours, Log Max XT7000 processor head. Operating Weight 69,070.9lb Overall Width 11.16ft in Height To Top Of Cab 12.24ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2009 TigerCat 845C -14000+hours -Uc 50% -5702 360 head -Disk in good shape -Woods ready

CSI PTD264 delimber & Pitts carrier included. CSI DL-4400 saws shown are not included.

2018 TigerCat H855D -8800+ hours -Waratah 624c head -Tight and dry -Uc in great shape Ready to work

2012 Tigercat 610C -17864 frame hours -Previous owner did engine -40,000lb winch -Very tight machine -Tires 85% percent -Has a new front axle replaced in Feb 2024

1999 Tigercat 630B -14000 frame hours -4200 on 8.3l Cummins -New fuel filter -Greased -Two boom cylinders will be needed re-repacked -Top center pin is a little bit loose but almost don’t notice yet Functional woods ready skidder

TC 5702 Sawhead, 110-degree wrist. 36” tri trac New teeth, serviced and dried up.

2022 Tigercat X822E -2,755 hours -Tigercat 5702 sawhead -HID lights -Webastos engine and hydraulics heater -FH400 undercarriage with 24" pads -Remainder of 3 years or 6,000hrs powertrain and hydraulics warranty which ends Aug,8th 2025 -$4,000 worth of spare hoses -Spare saw teeth and bolts -Oil filters -Machine is in like new condition

Tigercat 240B with Washer Saw Still under power and available for inspection.

2013 Tigercat 234 Loader