Equipment For Sale

Filtering

Reset All 

thru
 Used     New
Viewing Page 198 of 487
9730 Results Found
Sort By 
$ 16,500

JOHN DEERE 643D FELLER BUNCHER 6 CYL DEERE STEERING WHEEL STEER KOEHRING WATEROUS HEAD DRIVE PUMP IS OUT OF IT 28L-26 RUBBER

 Manton, MI
Lutke Equipment LLC
231-824-9505
Call

$ 455,000

2020 John Deere 859M -2400 hours -2900 intermediate head 360 -Leveling cab -28” pads

Josh Digirolamo
828-302-7264
Call

$ 18,000

This 335C John Deere knuckle boon loader operates as it should no problems that we’re aware of. It has 20,965.6 hours on it. It would need some work to be confident in it in the woods but on the yard it’s always done good. If interested in this machine call Gavin 601-394-7796 Tim 251-366-3237 Kameron 251-242-5493 The machine is being sold from State Line, Mississippi, 39362, 467 St Peter St

 State Line, MS
AlaMiss, Inc.
601-848-7811
Call

$ 20,000

1995 644G loader parting out machine. Has good engine $9500.00 . Has Wicker forks $6500.00 lots of parts on this loader, the transmission needs repairs. Forks have been removed but if you want the whole machine we can put them back on. For more information you can contact Gavin 601/394/7796 Tim 251/366/3237 Kameron 251/242/5493 located at 467 Saint Peter Street State Line MS 39362 ALL SALES ARE CASH, CASHIERS CHECK OR BANK TRANSFER.

 State Line, MS
AlaMiss, Inc.
601-848-7811
Call

$ 48,900

ENCLOSED CAB, SMOOTH BUCKET, JOYSTICKS

 Lucasville, OH
Ricer Equipment
740-289-4318
Call

Call for Price

Reman John Deere 6068T Mechanical Engine

 Amesville, OH
K & D Equipment
740-541-1211
Call

Call for Price

John Deere skidder axles to fit E series through H series. 540-748 skidders

 Rocky Mount, VA
Mechanized Solutions LLC
304-494-4830
Call

$ 21,900

1976 John Deere dozer 7110 hours Winch 6 way blade New UC High,low,neutral,reverse Has 1st,2nd,3rd,4th gear Winch break band is stuck Fires up no matter how cold Good running John Deere turbo engine

Mitch Stevens
828-773-6986
Call

$ 195,000

2012 John Deere 3754D Processor -11,743 frame hours -Engine and pumps replaced at 9,000 hours -2014 Waratah 625C head -Undercarriage is good -Pins and bushings are tight

Josh Digirolamo
828-302-7264
Call

$ 112,000

2021 John Deere 650K LGP Dozer, 1200 Hours, Enclosed Cab, TopCon Ready

 Elkins, WV
Reckart Equipment Co.
304-614-7939
Call

$ 69,900

1997 Deere 548G Skidder with 20,567 hours. Includes winch and blade. Weight:21,740 lbs. Length:20.77 ft Width:9.85 ft Height:9.88 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Mount Pleasant, FL
NEF Equipment
855-251-2648
Call

Call for Price

JOHN DEERE 85G Mid-Sized ExcavatorNeither too big nor too small, these right-size excavators are the perfect solution for a wide varietyof tasks.Specifications: -- Engine: Net Power 56.9 HP at 2,000 rpm ( (ISO 9249) 42.4 kW) -- Engine Cylinders: 4 -- Powertrain: 2-speed propel with automatic shift - Low 3.1 km/h (1.9 mph) - High 5.0 km/h (3.1 mph) - Drawbar Pull 6650 kgf (14,661 lb.) -- Swing Speed: 10.5 rpm -- Fuel Tank 31.7 gal -- Hours: 710Equipped with: -- AC and Heated Cab -- Front blade -- Multifunction, color LCD monitor -- 2-speed propel with automatic shift -- Electronic engine control -- Reduced-drift valve for boom down, arm in -- Auxiliary hydraulic valve section -- Work lights: Halogen / 1 mounted on boom / 1 mounted on frameThe 85G comes equipped with an independent-swing boom that enables work close to curbs, parallel to structures, or alongsidetraffic. We can provide financing and also the most economical delivery to your location.

Dale Granger
800-374-5009 ext:331
Call

$ 395,900

 Fairfield, ME
NEF Equipment
855-251-2648
Call

$ 174,900

2012 Deere 753J Feller Buncher, Equipped with a Quadco 22" 360 Degree Wrist. New Hydraulic Pump New Oil Pan and sealed Rear Main Seals. New Sprockets , Idler, New Rear Mains, New ECM Computer, Only 11,000 Hours, HEAT AND AC in cab. Ready for the woods. Weight W/O Attachment 50,480 lb Width 10.44ft in Height 11.32ft in Length 11.67ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Blakeslee, PA
NEF Equipment
855-251-2648
Call

Call for Price

Early Timbco T425 with rexroth pumps, cat finals, Poclain swing motor, Cummins powered- all parts available. Shipping available. Parting out, let us know what you need.

 Rocky Mount, VA
Mechanized Solutions LLC
304-494-4830
Call

$ 29,500

Working machine just came out of the woods

 Bridgewater, NH
Michael F Sharp Enterprises
603-252-6689
Call

$ 59,500

John Deere 548 turned into a John Deere 540 GII grapple Skidder, direct drive, approximately 13,000 frame hours. Running and working today.

 Farmington, MO
Mechanized Solutions LLC
304-494-4830
Call

$ 58,000

19.5 Tires, 24" Bucket, 4X4 Power Shift Tran, Extendible Dipper, Front Coupler, General Purpose Bkt, Pilot Controls, ROPS

 HOUSTON, TX
Doggett Machinery
225-306-7028
Call

$ 239,000

Dual swing motors 75% UC Machine is immaculate

 Bridgewater, NH
Michael F Sharp Enterprises
603-252-6689
Call

$ 130,000

24" Pads, 3.96 m (156 in.) Blade, Cab w/ AC, Direct Drive Trans, Power-Angle-Tilt, Wide Track

 LUFKIN, TX
Doggett Machinery
225-306-7028
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved