Equipment For Sale

MLS Number 12496080 2019 Volvo L50H Wheel Loader 3575 hours Volvo D4J Diesel Rockland GPX 2 yard bucket Solid tires @ 70%

Air Conditioner Auxiliary Hydraulics Pressure - High Pressure Beacon Combined Hydraulics EPA Label Hand and Foot Control Lighting Mirrors Pilot Control Radio - AM FM CD Radio Ultra Low Sulfur Diesel Fuel

2018 Volvo ECR145EL -2,995 hours -A/C and Heat -Hydraulic Thumb -X1 Auxiliary -Hydraulics Plumbed for Hydraulic Quick Coupler -Push Blade -Engine Block Heater -36” Bucket w/ new teeth -15'1" Boom -8'2" Arm -20" Shoes w/ Bolt-on Rubber Pads

2022 Volvo EC250E LR -485 hours -60 ft long reach -60” cleanout bucket -Has both rear & side view cameras -Fresh 500 hour service -Extended Premier Warranty

MLS Number 10842936 2019 Volvo EC250EL Excavator 404 hours UC 95% 36" In like new condition Warranty remaining

2018 volvo EC250EL -13721 hours -Tight and dry -Main bearing was mic'd and is good no play -Fire suppression -Auto greaser -60" pierce pacific grapples with cylinder over heal rack -Waylon rear entry cabs -High walker undercarriage -Dealer maintained.

2006 Volvo EC210BFX Road Builder Excavator with Rotobec RPA Grapple with Topping Saw. Nice older unit thats built heavy duty for the woods.

2007 Volvo DHD D12 464 HP engine 10 speed Full locking 46k rears 4:44 ratio T ride suspension 452k miles Nice truck PICTURES COMING SOON

2020 VOLVO AUTOMATIC TRANSMISSION DUMP TRUCK 339,XXX MILES D13 VOLVO MOTOR 405 HP AUTOMATIC TRANSMISSION DOUBLE FRAME NEW 16' BODY NEW TIRES

2018 VOLVO VNL64T300, 364,400 miles, Volvo D13 Turbo Diesel, 455HP automated trans., Inter Axle lock, Diff lock, Steerable pusher axle, air ride, single frame, Heat/AC, GVWR:52350 LB 12350 LB Front axle, 40000lb Rear axle, Aluminum Brush Guard, Air ride seats, Radio, Power windows, Steering wheel controls, Power mirrors, Full aluminum rims, 255/70R22.5 Pusher axle tires, 11R22.5 Front and Drive axle tires, $39,500

This 2006 Volvo truck is in great condition internally and externally. The truck has 1,429,462.4 miles on it. The truck has an automatic transmission. The passenger seat has been taken off. We are currently waiting for the title of the truck to come in. If interested in this truck call Mr. Gavin 601-394-7796 Mr. Tim 251-366-3237 Kameron 251-242-5493 The truck is located in State Line, Mississippi, 467 St Peter St

2004 Volvo Dump Truck with 14ft bed, Auto 6 speed trans, 75%rubber on rear, New tires on front. More pictures to come Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Volvo wheel loader bucket, 2 yard capacity, good condition

1996 Volvo A35C, 16,981 hrs., Volvo 6cyl. Turbo diesel, automatic trans., 6 wheel drive, front/rear diff locks, tailgate, EROPS, Heat/AC, 26.5R25 tires, new air and fuel filters, %59,500

To Be Sold In A Lot Of 5 2000 A40D 19557 hours 1998 A35C 201561 hours Unknown A35 257316 Hours 1995 A35 157949 1998 A35C 165793 Can Provide serial numbers per request

2005 Volvo A25D Articulated Dump Truck with 8,620 hours. Inspection report available. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1999 Volvo A25 Swivel dump truck with new rebuilt motor. Located in Tazewell, VA Contact Zach for more information. 931-224-0699

VOORWOOD M 15A CNC Round End Tenoner & Mortiser for 45° Door --The "M15A" Miter Machine is designed to rapidly make mortise and tenon cuts at 0°, 45° Only, . Parts can be up to 1.5"; thick and up to 4"; wide, and of ANY length. --A primary application for this machine is for miter cabinet door frames. Parts can be quickly transferred from left to right. They are mortised on the left side of the machine and tenoned on the right. The machine can also mill the slots. --Specifications & Equipped with: -- The mortise station has (3) servo-controlled axes (X, Y, and Z) that are coordinated by the machine controller to achieve complex CNC motion. It is equipped with a collet-style router spindle for cutting. The tenon station uses the same X- and Y-servo-controlled axes as the mortise station and is configured for pneumatically actuated in-and-out movement along the Z-axis. The tenon station is equipped with a direct drive shaper spindle for cutting. -- -- Pneumatic clamping assemblies with non-marring urethane pads are mounted to the hold-down assembly to secure the parts during cutting and these can be adjusted to various locations over the cutting surface. -- -- M15 Miter Machine operator interface consists of a colored touch screen. For simplicity, the entire calibration, setup, and monitoring of the machine are accomplished using only four touchscreen displays. The program designs the depth and location of both the mortise and the tenon. When the design is complete, it is saved in a recipe format. Once this recipe is opened, the operation is as simple and boils down to feeding the substrate into the machine. -- -- The full-color touchscreen panel is located on the front of the machine to provide easy access for setting up or operating the machine. Clamping and shaping operations are controlled by operating lighted pushbutton switches.

VOORWOOD A212 FEED THROUGH SINGLED SIDED SHAPE AND SAND. FEEDS FROM RIGHT TO LEFTEquipped with: (4) workstations: (2) 5 HP - 6,000 RPM Shaping stations with 1-1/4" dia. x 2-3/8" long spindles, max. cutterhead dia. 6"; (2) 1 HP - 1,500 RPM sanding stations with 1-1/4" dia. x 4" long spindles. -- All spindles are 5-3/4" horizontally and 2-1/2" vertically, preset 20ø angle on all units; 1 HP feed motor with 0 - 35 FPM variable feed speed. -- Capacity: 5" x 5" Min. part size, 1/8" to 1-1/2" max. thickness, 1-3/4" max. profile face.Also included: Equipment is in good working order and is still under power as noted in the video. There is a variety of cutters included with the sale of machine, and also the return conveyor is included. Cutter heads are as seen in the photos and replacement knives. Also included are TURBO SAND Heads and sanding strips as well as the owners manual. The return conveyor has a single phase 110V roller at the top of the transfer and a 230V 3PH non-marking belt. a Formica top stand to catch doors returned included too. Machine A212: 40"W x 102"L x 69"HConveyor: 44"W x 87"L x 25 1/2"HTransfer Table: 37"W x 41"L x 36 1/2"HCatch Stand: 33 1/2"W x 27"L x 24 1/4 " HAssembled Footprint: 87"W x 144"L