Equipment For Sale
9708 Results Found
$ 125,000
2014 TIGERCAT 250D Trailer Log Loader Hours- 9,604 Delimber And Bucksaw Included Runs And Operates as It Should Trailer Year- 2014 Trailer Manufacturer- Kodiak Delimber- Yes Woods Ready
$ 72,500
2018 Tigercat 1185, 4353 hrs., TC FPT N67 Tier 4F Engine, rated at (230 KW) 308hp, Tigercat Extreme Duty pump drive, trans., and hydraulically balanced bogie axles, $395,000
Call for Price
Call for Price
2007 Tigercat 720E, runs good but does need a saw disk. We plan to put a disk on it. So it'll be ready for the woods when purchased. Located on our yard at 437 Saint Peter Street State Line MS 39362 For more information you can call Gavin 601/394/7796 Call or text - Tim 251/366/3237 Kameron-251/242/5493 ALL SALES ON USED EQUIPMENT ARE CASH, CASHIERS CHECK OR BANK TRANSFER.
$ 149,500
$ 66,000
2012 Tigercat 610C -17864 frame hours -Previous owner did engine -40,000lb winch -Very tight machine -Tires 85% percent -Has a new front axle replaced in Feb 2024
$ 26,500
1999 Tigercat 630B -14000 frame hours -4200 on 8.3l Cummins -New fuel filter -Greased -Two boom cylinders will be needed re-repacked -Top center pin is a little bit loose but almost don’t notice yet Functional woods ready skidder
$ 69,900
$ 289,000
Call for Price
2005 Tigercat 822 Feller Buncher, Equipped with a Koehring 24" Hot Saw with 90 Degrees, Enclosed Cab with Heat and Air Conditioning, Engine is a Cummins 8.3 Diesel with 6,900 Hours, Undercarriage is 90%, Ready for the Woods. Length 13 ft 11 in Width 10 ft 0 in Height 11 ft 0 in Weight 52,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
2018 Tigercat 720G Feller Buncher with 6900 hours, Tight and Dry Machine, Disk 75%, Tires 75%, New packings in cylinders, One owner. Weight 34,250 lbs Length 24 ft 0 in Width 8 ft 4 in Height 11 ft 0 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
$ 485,000
2022 Tigercat X822E -2,755 hours -Tigercat 5702 sawhead -HID lights -Webastos engine and hydraulics heater -FH400 undercarriage with 24" pads -Remainder of 3 years or 6,000hrs powertrain and hydraulics warranty which ends Aug,8th 2025 -$4,000 worth of spare hoses -Spare saw teeth and bolts -Oil filters -Machine is in like new condition
Saw head was taken off of a 2018 Tigercat feller buncher. We ran it through our shop and did any repairs we found. It has a new butt plate. Saw spindle was inspected. Splines and coupling are good. Seals and bearings are also good. New carbide or hardened teeth can be installed. Your choice. We have the largest used logging parts inventory in the south. Call us for all of your used parts needs.
$ 465,000
2010 Bandit 4680T Track Horizontal Grinder, Equipped with a Caterpillar C-27 1050 HP Engine,3700 Hours Currently, Undercarriage is 85%, Machine has 2" and 3" Screens, 2nd Owner, Wireless Control, New HG600 Clutch, New Head and Tail Shaft, New Conveyor Belt, Compressor on machine, Ready for Work. Weight 95,200 lbs Width 140 in Height 152 in Length 492 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
$ 61,900
2005 Tigercat 244 Log Loader, 2006 Big John Trailer with CTR Delimber and Topping Saw, CTR Ground Saw, Cummins 5.9 Diesel Engine Enclosed Cab Heat and AC, Ready for the Woods. Length: 15 ft 7 in Width: 10 ft 0 in Height: 11 ft 0 in Weight: 36,500 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
Call for Price
2013 Tigercat 720E Feller Buncher 5600 Head with new teeth & disk. 30.5 X 32 tires 11,100 hours.
$ 405,000
2016 880 Tigercat log loader 16- square grapple. Hoe chuck grapple also available. New grapple has less than 2,000 hours and cost almost a hundred thousand dollars and works awesome! 8,200 hrs.
Call for Price
2013 Tigercat 620D Grapple Skidder, Winch, Has Cummins Engine, 1,250 Hours, Tires are 35.5, Dual Rings on on Rims, Enclosed Cab with Heat Air Radio, Every Pin and Bushing Replaced on the machine, New Parking Brake, Glass is Good, Exhaust Good, All Arch Pins Lined and Re-bored, Ready for the Woods. DIMENSIONS with standard tires and arch LENGTH 23'9" WIDTH 11' HEIGHT 10'4" WEIGHT 36,250 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.