BioMass Equipment For Sale

VECOPLAN RG 70/200K Shredder with Steel Belt Conveyor & Dust CollectorSpecifications: -- Hopper Opening: 70″ x 80″ -- Hopper Volume: 4 – 6-1/2 Cubic Yards -- Main motor: 200 HP -- Rotor diameter: 20″ -- Number of cutters: 84 (triple row) -- Size of cutters: 40 mm x 60 mm -- Screen size: Holes 2″ -- Rotor speed: 145 RPM -- Rotor diameter: 20″ -- Hydraulic Feed Ram: 10 HP - 2-Speed -- Throughput: 2,000 – 28,000 Lbs/HrEquipped with: -- 10 HP Motor Dust Collector -- 48″ W kW SCHMIDT Shredder Infeed Conveyor w/ 20′ pit section

VECOPLAN RG52/60 SINGLE SHAFT SHREDDER Includes Box Dumper and ConveyorsSpecifications: --In Feed Opening: 52″ x 58″ --Rotor Length: 52″ --Rotor Diameter: 15″ --Hopper Volume: (4) Cubic Yards --Cutters: 37 --Drive Motor: 60 HP --Box Dumper / Table --Infeed Conveyor --Discharge Conveyor for Gaylord Box Loading

MLS Number 11342021 2008 Vecoplan RG32/20U Grinder/Shredder Single shaft grinder / shredder 80 DBA noise level 32 in. by 42 inch opening waste grinder with vertical 2 cubic yard hopper 20 HP rotor motor Equipped with10 inch rotor with 20 indexable/replaceable cutter knives Rotor / cutter head grinds at 95 R.P.M. Hydraulic pusher ram with 1.5 HP two speed pump motor Separate electrical panel with push button controls 80 DBA noise level 8 inch exhaust 8 inch hump magnet screen to produce ½ in.in size Handles 1,000 to 1,200 lbs./ hour depending on product mix and loading. Machine still operating. Will be available sometime in May/June 2022

VECOPLAN - RG52-40SWU Single-Shaft Shredder w/hopper, screen, and control panel -- COMPLETE Rebuild. -- 52" x 48" Feed opening. -- (37) Cutters. --÷ Motor: 40 HP; "new" motor. -- Control panel -- New hydraulics. -- New cutters. -- New bed knife. -- New guide rails. -- New wipers. -- Sandblasted and freshly painted. -- Loaded onto your TruckNote: We also have blowers, airlocks, cyclones, and piping.

VECOPLAN VAZ 145/250 SINGLE SHAFT SHREDDERSpecifications; -- 575v 3 Phase --Hopper opening: 57 x 98.58 in. --Rotor width: 98.58 in. --Rotor Diameter: 14.56 in. --Rotor speed: 200 rpm --Main Drive- Electric motor with power belt drive --Gear ratio: i=5 --100 hp --Motor current: 192 A --Dimensions:- Shredder: 184"L X 141"W X 108"T- Chute: 160"L X 128"W X 76"T- Panel: 73"L X 50"W X 25"T

2018 Vermeer HG2800 Cat C27 950HP Has Cat Engine Warranty to 6,000 Hours or Approx. 10-31-22 Approx 2600 Hours

Vermeer HG6000 3/4" Square Baffel Screen Only had half a truck load ran through it

2015 Vermeer FT3001358 hours Can run carbide to chipper teeth

Vermeer HG365 Grinder New infeed roll and remote control Ready to go to work!

2013 Vermeer HG6000 -6000 hours -CAT C-18 engine -New material output belt that comes with it -Tires and lights good

2006 Vermeer HG6000 Horizontal Wood Grinder CAT C16, 630 Hp engine Approx 6300 hours PT Tech clutch; Magnet; Remote 1 1/4", 3" & 6" screens Regular maintenance Work ready

2009 Vermeer HG 6000TX -10,341 hours -150k worth of repairs less then 300hours ago -Strong running, good machine -Receipts and list of new parts available for serious buyers only -Parts list -New Infeed conveyor, chain, and roller -New idler roller bearing -New infeed wear strips -New hammer feed drive belts -New anvil bars -New shear edge and cutters -New mill seat new tail belt -New roller lock cylinder and more

2006 Vermeer TG9000 13’ Tub Grinder, Cat 3412E 860hp with 8900 hours, Heads and rebuilt done at 6500 hours. Width 46 ft Width 11.9 ft Height 165 in Weight 106,000 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2009 Vermeer HG 6000TX Track Horizontal Grinder, with 10,341hours on a Cat C-18, 630HP Engine. $150k worth of repairs less then 300hours ago. Strong running, good machine. Receipts and list of new parts available for serious buyers only. New Infeed conveyor, chain, and roller New idler roller bearing New infeed wear strips New hammer feed drive belts New anvil bars New shear edge and cutters New mill seat new tail belt New roller lock cylinder and more Weight: 75,000 lbs Transport length: Maximum of 37.3 ft Transport width: Maximum of 9.2 ft Transport height: Maximum of 148 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2017 Vermeer Tr626 Trommel Screen -2600 hours -Tipping grid -3/8 stainless steel screen mesh Turnkey unit!!!

2017 Vermeer HG6000 Horizontal Grinder -4,400 hours -C-18 -Belts good -No blowby Turn Key Unit

2004 XL Specialized HG 6000 Vermeer Grinder Has a new end feed. Has less than 6000hrs ran on it. Has new hammers

2020 Vermeer BC1800 XL Chipper, Machine has 2000 Hours, One Owner, Hydraulic Winch, Autofeed System, 173 HP 6 Cylinder Turbo Engine, DEF Engine, Well Maintained Machine Ready for Work. Length: 177” Height: 110” Width: 80” Weight 9,270 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2006 Vermeer TG7000 2100 hours Work ready