Equipment For Sale

Runs good and is still in operation Hooked up to 460 Table Extension has been repaired Main table has almost zero wear on it.

TANNEWITZ - XJ, ...Table SawSpecifications: -- 5 HP - 3,600 RPM Fan cooled motor, 1" right tilting arbor Table Saw with a 1-piece main table; table size 42" wide x 44-1/2" deep. -- Base formed from hot rolled steel of 5/16" thickness & welded into (1) solid unit; 10" dia. handwheels for easy adjustment of tilting, raising & lowering of arbor. -- Complete with: Extended rack & pinion adjustable rip fence for greater ripping capacity; left- & right-hand T-slot miters. -- 16" Blade dia., 4" dado width cap.; 4" cut depth at 90°; 3" cut depth at 45°. -- Equipped with: Taper pin miter with micrometer adjustment on fence, magnetic controlled off switch, and 6" dust outlet with auxiliary rear opening for easy access. -- Power safety electrical breaker box included. Please NOTE: No blade guard.

16" Blade cap., 3-3/4" max. cutting height, 5 HP - 3,600 RPM direct drive motor, arbor tilts 45ø, 44" x 40" cast iron table size, table with miter gauge slot. -- Complete with: Rack & pinion fence and large hand wheels for easy adjustments.

Capacities: 11” minimum length 98” maximum length 1” minimum width 32” maximum width 5/8” minimum thickness 3” maximum thickness with a conversed glue spreader(model 30J)

MLS Number 13438557 2016 Taylor TN520S Forklift 21253 hours 52,000 pounds capacity 74,400 pounds chassis weight 60" forks 164" lowered height 106" max fork height Drive tires 80% Steer tires 95%

2016 Taylor TN520S Pneumatic Tire Forklift with 21,253 on a diesel Engine. Overhead Guard, enclosed cab and sideshifter. Fork Length 60", Lowered Ht. 164", Max lift 106". Drive tires have 80% tread remaining, Steer tires have 95% tread remaining. Small leak in Hydraulic valve. Length: 22 ft 0 in Width: 10 ft 9 in Height: 12 ft 2 in Weight: 74,400 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2016 Taylor TN520S Pneumatic Tire Forklift with 12,794 hours on a diesel engine. Overhead Guard, and enclosed cab. Fork Length 60" Lowered Ht. 164", Max Ht. 106". Tires have 90% tread remaining. Small leak @ oil pan gasket and Hydraulic pump seal. Weight 74,400 lb Length 22 ft. Width 10.9 ft. Height 12.2 in. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

TAYLOR 6 Section Pneumatic Clamp Carrier6-Section x 10-1/2' width cap.; (36 clamps total), 30" opening on clamps, 3-1/2" high jaws; with pneumatic rotation, tightening, and panel flattening. -- Overall assembled dimensions: 9' 6" deep x 13' 6" wide x 9' tall.Tear down not included

JLT Clamp 713A-8-LCS (8) Section Large Capacity Door ProLarge capacity (8) section rotary door clamp for the medium to large cabinet shop. Produce up to 400+ cabinet doors per day. -- Each section includes: 38" x 96" maximum clamping capacity w/ 2-1/2" high jaws, (4) vertical clamps and (2) horizontal clamps. --Clamp & Square Multiple Cabinet Doors with Vertical Center Rail – (2) 38″ x 45″ Doors Side by Side Double Door Clamping. -- Includes: Heavy-duty, pneumatic drive for rotation, pneumatic clamping and squaring assembly.Actual model # 713A-8S-129W-68H-80D-NS-M-LC-L-M2

2016 Taylor THC-400L Cushion Tire Forklift with 6,891 hours on a diesel engine. Overhead guard, enclosed cab, and Side-shifting Fork Positioner. Fork length 60" Lowered Ht. 116", Max Ht. 76, Free lift 78". 100 % tread remaining on tires. Weight 57,200 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

MLS Number 13417095 2016 Taylor TN520S Forklift 12794 hours 52,000 pounds capacity 75,330 chassis weight 60" forks 164" lowered height 106" max fork height Pneumatic tires 90% Diesel

TAYOR 16-Section Clamp Carrier 20.5' width cap., (7) clamps per section (128 clamps total). .48" max. clamp opening clamps with 4-1/2" X 3 1/4" jaw height (128) Rocker plates 4" X 6" @ 80-1706 (purchase in June 2024)Complete with: -- Semi-automatic clamp tightening, -- (2) Air drive carrier rotation. -- (2) Pneumatic panel flattener -- OAL approx. 24' X 14' X 12'Note: The buyer will be responsible for tear down and loadingMachine model CC 20,5-16-481

TAYLOR - 20-Section: Clamp Carrier Specifications -- 8-1/2' Width cap. -- 39" Max. clamp opening; 2-1/2" Jaw height. -- Approx. (4) clamps per section.Equipped with: -- (75) Clamps total. -- Pneumatic tightener. -- Pneumatic panel flattener.Complete with: -- Air drive carrier rotation. -- I-Beam chain assembly.NOTE: Already taken down.

MLS Number 13438554 2019 Taylor XH-350L Forklift 18529 hours 28,400 pounds capacity 57,040 chassis weight 102" forks 180" Max fork height Sideshifter, fork positioner Dual pneumatic tires Drive 100% Steer 50% 4 hydraulic functions

MLS Number 13438556 2019 Taylor XH-350L Forklift 17014 hours 30,200 pounds capacity 57,040 chassis weight 102" forks 172" lowered height 180" max fork height Dual pneumatic tires 95% Sideshifter, fork position

MLS Number 13019231 2018 Taylor X330S Forklift 8991 hours 33,000 pounds capacity 48,600 chassis weight 114" forks 132" lowered height 236" max height Tires 100% SS/FP

Taylor Forklift, runs & works good

Taylor Forklift tight machine

1968 Taylor Cable Skidder 453 Detroit New Front Tires, 90% Rears Bear Claw Chains Front and Rear At 75% Runs and Operates Good

--In Auction: https://exfactoryauctions.com/Detail/CR-230068/event/A122024$1 --No Reserve!-- TAYLOR 800036 7' W 12-Section Semi-Automatic Pneumatic Clamp Carrier, with Flattener & Tightener Equipped with: (71) 32” Cap. Clamps, with 4-5/8” W x 3-1/2” H Jaws. Air motor drive. Dual foot pedal control. Complete with: Pneumatic Panel Flattener. Pneumatic Clamp Tightener.