• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
24 Results Found for Band Mills (Wide) Viewing 1 - 20 of 24 results
STANDARD LISTINGS
Complete Cleereman Lumber Pro System w/ 4 Strand Log Deck, Scanner System (2) Hyd. Power Packs, S/N 42-996 w/(14) Bandsaws
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Coe 6' Double Cut Air Strained Band Mill Model# 972 Serial# 114
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351

Forano Band Mills (Wide)

Call for Price
Forano 7' Band Head Rig
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Forano Band Head Rig Machine# 16373 Model# BS-72 LH
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
HMC Line Bar Unit
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Klamath 7' Band Mill Model: BS-72 S/N:671
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351

Klamath Band Mills (Wide)

Call for Price
KLAMATH Band Headrig - 7' Right Hand bandmill with off-bearing live rolls and wheel guard. Very good wheel thickness. Dependable weight strain. Excellent condition. Item # 40126.check out our full inventory at www.benjones.com
Equipment Location:WAVERLY HALL, GA
Ben Jones Machinery
706-324-2604

Klamath Band Mills (Wide)

Call for Price
Wheel for Klamath 6' Resaw
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351

Klamath Band Mills (Wide)

Call for Price
7' Wheel for Klamath Head Rig
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Kockums 6' Band Mill Air Strain 9" Wide Wheels
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
McDonough 6' Band Head Rig w/Weight Strain. Out and Ready to Go.
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
6' 72M McDonough Band Head Rig Weight Strained S/N 157 With Slab Belt
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Air strain coming out of the shop Dec. 1st, 2017 and will be ready to install and operate on that date
Equipment Location:Shipshewana, IN
Jeff Miller Inc.
574-370-5050
Approx 28 Acres Building is approx 150' x 100' Truck Scales Office Building Debarker McDonough double cut sawmill Edger Brewco Resaw Trim Saw Chipper/blowers/waste conveyors All electrical and controls Scragg Mill: The scragg was installed but never put into operation or ran with the rest of the mill. This mill has been shut down for approx 8 years. Seller is putting land and machinery together as a package. May be willing to separate the machinery from the land, but will sell all machinery as one group.
Equipment Location:SC
Carolina Machinery Sales, Inc
704-288-1904
HORIZONTAL BAND MILL: Primary log breakdown. 52" cast iron wheels to saw 52" diameter logs. Double cut option with 7" saw blade. Many models & options. Optimized edgers, resaws w/run around, hydraulic debarkers, vertical twin & quad band saws w/ chipping heads, double arbor gangs, & board edgers.
Equipment Location:Burlington, NC
MACHINERY INSTALLATION CO., INC. (M.I.C.I.)
336-269-2284
P.H.L 62" Vertical Band Mill Resaw Model McDonough 62-90-ILT S/N REP-JOB-5619
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351

S and W Band Mills (Wide)

Call for Price
Log infeed deck with loader to band mill S&W Bandmill: Set up to run 1-1/2" blades, 30' Log Length capacity, 36" diameter capacity, custom "horizontal edger" can cut 6-1/2" deep with (2) blades, dragback fingers with automatic outfeed rollers, operator cab S&W Edger: System is set up with 5-6 blades and laser light system S&W Grade Resaw: Designed to run long material and separate boards, 16" x 16" capacity, 20' length capacity Included: All conveyors, decks, transfers, electrical controls, old chipper. This mill is still in operation and can be insptected under power. The seller is moving to a new facility and will not relocate the sawmill. This system is set up to cut large beams for log homes.
Equipment Location:SC
Carolina Machinery Sales, Inc
704-288-1904

Salem Band Mills (Wide)

Call for Price
Salem 72" Horizontal Band Mill/ Resaw
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351

Salem Band Mills (Wide)

Call for Price
SALEM 6' Head Rig - right hand head rig with air strain conversion.check out our full inventory at www.benjones.com
Equipment Location:WAVERLY HALL, GA
Ben Jones Machinery
706-324-2604

Salem Band Mills (Wide)

Call for Price
Salem 54" band Mill - S/N-L96655.83
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351