logging Equipment For Sale

2015 Tigercat 610E Track Skidder -10271 hours -Track system in great shape (800 hours) -Serviced regularly and just got a look through -Machine will pull anything anywhere -Tight and dry

2014 Tigercat 635E, 15,805 hrs., 15k frame hrs., 500 hrs. on rear and front chuck, engine 8k hrs. ago, all pins and the back half were re-done 500 hrs. ago, center has a slight bump in it, cold air, light works, no codes, reversing fan unhooked it 100 hrs. ago, small leak up front, $125,000 (Price includes the 500 hour tracks that are on it, For 10k less, I have a 60% set that can go with it instead)

2015 Tigercat 620E Grapple Skidder, 10.000 Frame Hours on Machine, Enclosed Cab with Heat and Air Conditioning, Center Section is Tight , Tires are 30.5 x32 Machine is Ready for the Woods. Weight 37,750 lbs Length 27ft Width 12 ft Height 10ft 4in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2018 Tigercat 630e -5897 hours -Well Maintained -Def System Replaced by Titan at 4900 Hours -Tires - 30% -Working Daily

Timbco Bar Saw Head for Wheeled Machines $4000

Location: ALLENWOOD, PA

LITTLE VALLEY, NY LOCATION

2005 Timbco 445EXL Feller Buncher, Equipped with a Quadco 22" 360 Wrist Saw, Enclosed Cab with Heat and Air Conditioning, Leveling Cab, Good Undercarriage 70%, Ready for the Woods Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2005 Timbco 425 EXL Feller Buncher Equipped with A Quadco 22" 360 Degree Saw Head, NEW Cummins Engine Installed, Under Factory Warranty, 7000 Frame Hours Undercarriage 80% Enclosed Cab with Heat and Air... Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2000 Timbco 445D Feller Buncher, Cummins 8.3 Diesel Engine, Hours Unknown, Has 43" Bar Saw with 3/4" Pitch, Heavy Duty Cat D-7 Undercarriage is 70-75%, Enclosed Cab with Heat and Air Conditioning, Repleaced 3 Pumps (New), New Control Valve, $15,000.00 in 6000psi New Hoses installed, Ready for the Woods. Weight 65,000 lbs Length 35 ft 6 in Width 11 ft 2 in Height 12 ft 0 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2004 Timbco 425EX -19000 frame hours -22c Quadco 40 degree tilt head -8.3 cummins -D6 undercarriage -Heat/ac -New Bluetooth radio -Clean-fix reversing fan -Brand new track chains, drive sprockets, track hardware, track tensioner w/spring -Could use some tlc

1993 Timbco 425D -4xxx on meter -Engine been rebuilt -Just replaced both track rails and sprockets have less that 10 hours on them -Idlers and rollers are in good shape -Everything works -Ac/heat -Radio -33” Timbco bar saw head -40 degree tilt -Cameras on the head and behind cab -All bushings are tight Ready to work very well maintained

1997 Timbco 425C Equipped with a CTR Dangle Head Saw with 24" Bar Saw, Rebuilt Engine with 3000 Hours, Undercarriage is 40-45%. Tracks are Good, New Drive Rollers, Enclosed Cab with Heat and AC, Ready for the Woods. Weight 55,235 lbs Length 21'4" Width 9'8" Height 12'2" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2002 Timbco 425 Feller Buncher, Equipped with a Quadco 20" Fixed Head, Leveling Cab, Enclosed Cab with Heat and Air Conditioning, New Final Drives, UC is 80-85%, Cummins 8.3 Diesel with 11000 Hours, New Windshield, Ready for the Woods. Weight 55,235 lbs Height 12 ft 2 in Width 9 ft 8 in Length 21 ft 4 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2000 Timbco T425C, 16,756 hrs., Quadco 360° Felling Head, 8.3 Cummins, Rotating cab, double grouser pads, doors, guards, glass, and paint all in good shape, $79,500

Timbco 445D. The last of the mechanical machines. 8.3 Cummins, Rexroth pumps, Rexroth valve, in the woods operating today. Equipped with lateral tilt bar saw.

Various Timbco Parts Machines - Plenty of parts, K & D Specializes in Timbco rebuilds and parts.

Timbco 415 lower car body, very low hours, excellent tracks, GFT 50 finals, drive motors.

Timbco 425 bottom rollers, have single flange and double flange, (75) available