Equipment For Sale

CATERPILLAR 315D LINKAGE (315D-317) CONNECTING LINES INCLUDED GOTENE UFO AB S70 COUPLER MOUNTING PINS INCLUDED MOUNTING PINS INCLUDED ROTOTILT S70 COUPLER S70 LINKAGE SOLD AS IS

52 inch opening, 2762 lbs, 360 rotation

52 inch opening, 2762 lbs, 360 rotation

#134 • Caterpillar Forklift -- Specifications -- Year: unknown. Make: Caterpillar. Model: GC45K-SWR. Serial #: AT87A00367. Engine: unknown 4.3 liter. Fuel: LP. Load Capacity: 10,000 lbs. Mast Height: 98”. Meter Reads: 12,160. Reach Height: 17’. -- Features -- Fork Positioner: no. ROPS: Open. Side Shift: yes. Stage Mast: 3. Tire Size: front22x9x16. rear-13x7x12 1/8. Tires: Solid. -- Seller Statement -- Sells with extra set of 6’ forks, no propane tank

CATERPILLAR CB LINKAGE BRACKET INSTALLED PART NUMBER 253-7830 CATERPILLAR GSH324 WH GRAPPLE CATERPILLAR PART NUMBER 587-8986 INCLUDES CONNECTING LINES INCLUDES MOUNTING PINS INCLUDES WASTE HANDLING SHELLS SOLD AS IS

1.3YD FRONT LOADER BUCKET FOR USE WITH: 420F/F2, 430F/F2 ST, NEXT GEN 420, 420XE, 430 PIN ON

CAPACITY:UP TO 1000 TONS PER HOUR CASTING:75 FEET CUTTING HEIGHT UP TO 55 INCHES DRIVE: RUNS OFF CARRIER VEHICLE HYDRAULICS, 3700 PSI @ 50 GPM FLAT CAST: RIGHT, 135-DEGREE ROTATION TO THE LEFT FUSION INTERFACE Online Owner's Manual SIZE: 36” DIAMETER; 12” DEEP MINIMUM FAN WIDTH: 108” OR 120”

89" WIDTH BOLT ON CUTTING EDGE CATERPILLAR 1.3 CUBIC YARD MULTI PURPOSE BUCKET CATERPILLAR PART NUMBER 232-2696 FOR ALL BACKHOE MODELS EXCEOT 446 AND 450 IT LINKAGE SOLD AS IS

Coupler - Quick. Engine Enclosures. Lighting. ROPS - Enclosed. Auxiliary Hydraulics Pressure - High Pressure. Mirrors. Coupler Type - Hydraulic. Combined Hydraulics - Two Way. Bucket. Counterweight. Lift - Standard. Steering Type - Wheel. Forks - Pallet. Auxiliary Hydraulics - 3rd Valve. Additional Information CAB, HTR, HQC, BKT, 20.5-R25 FORKS. CONDITION AND HOURS SUBJECT TO CHANGE. Online Owner's Manual. PLEASE CALL FOR MACHINE LOCATION

CATERPILLAR H55S HAMMER CATERPILLAR PART NUMBER 561-2551 HAS NOT BEEN USED INCLUDES 1 CONE TOOL AND 1 CHISEL TOOL INCLUDES 303/304 BRACKET INCLUDES CONNECTING LINES SOLD AS IS

2950 FT/LBS AUTOLUBE CHISEL BIT INSTALLED HAMMER M318F PIN LOCK BRACKET INSTALLED NEW GET NITROGEN GAS FIRED HAMMER SOLD AS IS

6000 ft/lbs impact force AUTOLUBE INCLUDES CATERPILLAR CB LINKAGE BRACKET INCLUDES PINS MOIL POINT NEW GET SOLD AS IS

CAT H160ES HAMMER COMMENTS: HAS AUTOLUBE. CONNECTING LINES INSTALLED DB BRACKET WITH PINS Online Owner's Manual REBUILT BY MILTON CAT

CATERPILLAR H160S HAMMER CATERPILLAR PART NUMBER 590-1662 HAMMER INCLUDES TB BRACKET INCLUDES AUTOLUBE INCLUDES BUCKET PINS INCLUDES CHISEL TOOL SOLD AS IS

AUTOLUBE INSTALLED CATERPILLAR H160S HAMMER CATERPILLAR PART NUMBER 590-1662 DB LINKAGE BRACKET INSTALLED INCLUDES CONNECTING LINES AND MOIL TOOL SOLD AS IS

CATERPILLAR H180S HAMMER CATERPILLAR PART NUMBER 590-1661 INCLUDES CHISEL TOOL INCLUDES CONNECTING LINES SOLD AS IS TB LINKAGE BRACKET INSTALLED

18 TEETH ARM HYDRAULICS- CUSHIONED- 32GPM/ 3770 PSI DISC DIAMETER 57IN KERF- 2 5/16 IN Online Owner's Manual SAW HYDRAULICS- 30GPM/ 4500 PSI THROAT OPENING 51.20IN TILT, PARTIAL, AND FULL- 51GPM/ 3770 PSI WIDTH- BASE 67IN. HEIGHT- 115IN. MAX CUT DIAMETER 22.50IN.

Like new, head looks good, all is tight and no noticeable leaks.

Off CAT 563D