Equipment For Sale

Filtering

Reset All 

thru
 Used     New
Viewing Page 27 of 478
9544 Results Found
Sort By 
$ 159,900

2006 Bandit 3680 Beast Recycler, C15 cat 545 HP Non-emissions engine with 9284 hours Radio Remote, Magnetic Head Pulley, 5th Wheel, Bandit rebuilt the mill area in 2019. Weight. 62500 lbs. Width. 130 in. Height. 162 in. Length. 528 in. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Winchester, VA
NEF Equipment
855-251-2648
Call

$ 299,995

2014 Bandit 4000T 1,300 Hours Pre-emission CAT Diesel 84” Cutting Head Just Serviced New Teeth New Wear-bars Back up camera air ride seat Winch

Mitch Stevens
828-773-6986
Call

Call for Price

2007 Bandit 4680T Beast Recycler, Cat C27 1050hp, 250 hours on reman engine, New auger bearings, New anvil, New gate, New belly, and discharge belt, New Cutter bodies, Radio remote, Magnetic head pulley, Air compressor. Weight: 92,000lb Length:624 in Width:139 in Height:162 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Ocala, FL
NEF Equipment
855-251-2648
Call

Call for Price

2000 Bandit 3680 Horizontal Grinder, Cat H18 Engine, Wireless Remote Autofeed System, Fold Up Track. Needs Radio Remote. Not ready to grind, missing parts. Length: 44’ Width: 10’10” Height: 13’ 6” Weight: 62,500 lbs. Fuel Tank: 400 gal. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Dallas, TX
NEF Equipment
855-251-2648
Call

$ 499,000

2022 Bandit 2680 Tracked Horizontal Grinder, In Stock Ready to Go, Call Today.

 Constantia, NY
Kleis Equipment LLC
315-623-2111
Call

$ 135,000

2020 Bandit 1425 Horzontal Grinder, Cat 120hp with 81 hours, Radio Remote, Magnetic Pulley, Extra Parts, Excellent Condition. Weight 12,500 lbs Width 98 in Height 120 in Length 288 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Casper, WY
NEF Equipment
855-251-2648
Call

$ 350,000

Cat C-18 755 HP Only 1100 Hours

Carolina Used Machinery
828-773-2204
Call

$ 13,500

2015 Bandit 200UC Chipper -751 hours -74 hp kohler diesel -12 inch Ready to work

Josh Digirolamo
828-302-7264
Call

Call for Price

Barberan UV Oven

Carolina Machinery Sales, Inc
704-288-1904
Call

$ 495,000

BARKER 600 HP BOILER, BIOMASS-FIRED: -- BARKER Boiler and Fuel System built & tested in 2011 as a pilot unit. Successful testing has been completed. This surplus equipment includes the following main features: -- Combustion Temp Capability- 2,000 deg. F.; Steam Flow 24,000 lbs/hr saturated; Steam Pressure 1,500 PSI @ 600 deg. F. -- Fuel Feed rate - 3,000 Lbs/hr at 1/4" biomass (5% moisture) -- Heat Input - 7,500 btu/Lbs HHV @ 22 mmbtu/hr. -- All equipment has less than 2,500 actual operating hours since installation.EQUIPMENT MAJOR COMPONENTS: Combustor, Cyclonic combustion technology, Refractory lined Heat Recovery. Steam Generator. Rotary Drum Dryer for Fuel drying - capable of 30% moisture reduction (at the above combustion parameters) and 1.5 tons per hour (installed as used equipment).BALANCE OF PLANT FUEL FEED SYSTEM: Live-bottom bin, Bunker, Feed conveyors, Wood hog, Vibrating screen, Drag and screw conveyors. Boiler water system - feed pump, water and steam piping Emissions Control: All required bag houses (SJVUAPCD) California permitted. -- Now REDUCED PRICE from $1.5 million !!

Bob Bullin
800-374-5009 ext:346
Call

Call for Price

2009 BARKO 640 Forestry Mulcher with 3,430 hours. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Billings, MT
NEF Equipment
855-251-2648
Call

$ 129,900

2008 BARKO 295 ML MAGNUM SELF PROPELLED LOG LOADER 1,553 HOURS SAVAGE SELF PROPELLED TAILER 5TH WHEEL FOR TRANSPORTATION RECENT SERVICED VERY GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS NO PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

 Dover, NH
Granite Heavy Equipment and Finance
603-953-5983
Call

$ 124,900

2012 BARKO 295ML LOG LOADER 4,529 HOURS GROUND SAW TRUCK MOUNTED JOYSTICK CONTROL VERY GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS NO PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

 Dover, NH
Granite Heavy Equipment and Finance
603-953-5983
Call

$ 120,000

2019 Barko 595B, 9435 hrs., Cummins Eng., New Self-propelled carrier, $120,000

 Whigham, GA
Knight Equipment Company, Inc.
229-762-3500
Call

$ 20,000

2002 BARKO 160D LOG LOADER AROUND 5K ON METER DELIMBER GOOD TRAILER GOOD BRAKES AND TIRES WORK READY FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS NO PAYMENTS WITH GOOD CEDIT GRANITEHE.COM

 Dover, NH
Granite Heavy Equipment and Finance
603-953-5983
Call

Call for Price

Barko 612 Forwarder available in parts or complete

 Rocky Mount, VA
Mechanized Solutions LLC
304-494-4830
Call

$ 189,000

2022 Barko 495B with Barko grapple & Big John carrier

 Summersville, WV
Ricer Equipment
740-289-4318
Call

$ 145,000

Heat/AC, CB Radio, Speakers, Enclosed

 Lucasville, OH
Ricer Equipment
740-289-4318
Call

Call for Price

In Stock,New Barko 495B Log Loader, On Trailer, Rotobec Head, Delimber, Bar Saw Hydraulics, Call for a quote today.

 Constantia, NY
Kleis Equipment LLC
315-623-2111
Call

Call for Price

Brand New Barko 295B Log Loader, Rotobec Grapple, Mounted on Pitts trailer. Give us a call for a price.

 Constantia, NY
Kleis Equipment LLC
315-623-2111
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved