Equipment For Sale

Machine will have a hot saw on it for the sale.

Cab w/ AC, Drawbar, Low Ground Pressure, Smart Grade

KOMATSU D61PX-24 Crawler DozerProven, second generation D61PX-24 comes standard with a parallel link undercarriage system for long undercarriage life. In addition to E and P modes, a new H mode helps operators maintain ground speed while operating under heavy loads. Specifications: -- Engine: Komatsu SAA6D107E-3 Gross 127 kW 170 HP 2200 RPM -- Travel Speed: - 1st 0-3.4 km/h 0-2.1 mph 0-4.1 km/h 0-2.5 mph - 2nd 0-5.6 km/h 0-3.5 mph 0-6.5 km/h 0-4.0 mph - 3rd 0-9.0 km/h 0-5.6 mph 0-9.0 km/h 0-5.6 mph -- Number of track rollers (each side): 8 -- Fuel tank: 372 ltr 98.3 U.S. gal -- Weight: 18320 kg 40,389 lbs -- Hours:5200,Equipped with: -- Cab integrated ROPS (ISO 3471) High rigidity and superb sealing -- Hydrostatic Transmission (HST) control system -- PAT Dozer with Adjustable Pitch -- Comfortable Ride with Heated Operator Seat -- Cab Damper Mounting -- Parallel Link Undercarriage System (PLUS) -- Self-adjusting idler support -- Palm Command Control System (PCCS) Levers -- One-Pedal Design (Decelerator/Brake Pedal) Controls Speed, During Operation -- Selectable Working Mode -- Heavy-Duty High-Pressure Common Rail (HPCR) Fuel Injection System -- Komatsu’s New Emission Regulations-Compliant EngineNew parts: Brand new radiator Brand new chains, upper and lower rollers, and new pads. We can provide financing and also assist in the delivery to your location.

2019 Komatsu 138 Excavator, 3500 Hours, Hydraulic Thumb

Quadco 27B Full service Work ready

2015 Komatsu 430-3 Hot Saw, approx 10,000 hrs., Undercarriage @ 85%, $199,900 Trades Welcome

Very good set of Komatsu 430 track groups in very good condition. 24 inch single grouser

Komatsu 400 series Feller buncher Final Dr. in excellent condition all inclusive

Valmet/Komatsu fellerbuncher footpedals sold separately or as one complete unit. Very good condition.

MLS Number 13686616 2014 Komatsu WA380-7 Wheel Loader 18429 hours Cummins 6.7 Goodyear 23.5R25 tires 75%

KOMATSU PC238 ROTOBEC 3045 WITH SAW TOP AND FRONT CAB GUARDING

Specialty harvester booms to fit Komatsu fellerbunchers. Exceptionally long reach. Complete set available. Call for pricing. In excellent condition.

2017 KOMATSU XT-460L FELLER BUNCHER #12475

2025 Komatsu 855 -175 hours -Just got the 150 service done -Needs nothing

2020 Komatsu WA270-8, 1072 hrs., Bucket, Forks, EROPS, Heat/AC, generally stored indoors, used for snow removal, and a little bit of unloading freight, and loaded sand a time or two, meticulously maintained, $149,000

KOMATSU D61PXi-24 Crawler DozerSpecifications: -- Engine: 126 kW / 169 HP @ 2.200 rpm (Turbocharged) -- Max. travel speed: 5.59 MPH -- Blade type: Straight -- Hours: 6,525Equipped with: -- Joystick operator controls -- IMC / GPS Machine -- A/C and Heated Enclosed Cab -- 6-Way Blade -- U-C is 65% Remaining -- Grade control -- Oscillation -- Drawbar -- Air Ride Seat

2013 Komatsu 941.1 Harvester with 10,520 hours. New hydraulic pumps for crane and drive also a new drive motor ar 10,200 hours. Equipped with a Komatsu 370.2 head, overhauled at 9,000 hours. A second 370.2 spare head is included. Operating weight 51,809 lb Transport length 26.5 ft Transport width10 ft Transport height 13 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2015 Komatsu XT430-3 Logging Processor with 9,700 hours has a Wartah 616c head topping saw. Under carriage and the oil cooler recently updated. Have some spare head cylinders and a feed wheel motor to go with it. As well as a burnt parts machine with good track motors, final drives , stick cylinder, stick boom with tele boom. Good working machine ready for production! Length 25 ft 2 in Width 10 ft 4 in Height 11 ft 9 in Weight 62,240 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

KOMO - VR 510 TG SOLUTION: CNC Router (ATC & Boring) -- Specifications5' x 10' Moving gantry; stationary table design in a front-to-back configuration with: 1-Zone phenolic vacuum plenum; (4) pop-up pins for sheet placement around perimeter. -- Equipped with:(1) 12 HP - HSK-63F Type ATC spindle; variable speed from: 1,000 - 24,000 RPM; 10-station ATC tool carousel; (1) 9-spindle boring unit. -- All AxesUtilize FANUC brushless AC Servo motors; driving precision ball screws on the Y- & Z-axis; helical Rack & Pinion on X-axis. -- Ride-on Profile way-bearing Systems for:Rapid feed rates up to 2,300 IPM on the X- & Y-axis; 1,200 IPM on Z-axis; motion components are serviced by an automatic lubrication system. -- GE-FANUC CNC Control with:WINDOWS Based control with: Color CRT screen; large hard disk for program storage; USB and RS-232 interface. -- LinearCircular & helical interpolation; automatic acceleration & deceleration; fast corner function; handheld teach pendant; absolute & incremental programming; feed rate & spindle speed manual override. -- Complete with:An assortment of HSK-63F tool holders; assorted collets; 25 HP TRAVAINI Vacuum Pump and documentation.

//This machine is in an Auction on exfactoryauctions.com// //Link to machine: http://exf.ac/i63 The Flex Series of CNC routers from Komo Machine has been developed specifically for the customer who expects the utmost in technical quality and reliability at an economical price. These machines feature a moving gantry configuration and a side-mounted tool changer. Features: Four-pole, 16HP (12kw), 24,000 RPM, HSK 63F, fan-cooled spindle, 12 position automatic tool changer with aggregate capability, Air blast for optimal dust/chip evacuation and cooling of the cutting tool, Advanced Fanuc HVI servo system tuned for optimum acceleration and deceleration, Fanuc Panel i control with integrated PC 19" color display Construction, FEA "Finite Element Analysis" engineered structure, Heavy-duty steel fabrication Specifications Spindle: 1 Spindle RPM 16HP (12kw), four-pole, fan cooled Up to 24,000, fully programmable with HSK 63F taper. Table: 60" x 144" (1524mm x 3658mm), Four (4) 1" (25mm) part location pins Aggregate-Capable Tool Changer: Max 12 tools, Max Dia. 3.25" (82mm) positions full; 6.5" (165mm) adjacent positions empty, Max weight 12 lbs each / 80 lbs total (5.4kg / 36.4kg) Max Length 5" (127mm) Feed Rate/Traverse: X-Axis 2500ipm (63.5mpm), Y-Axis 2500ipm (63.5mpm) Z-Axis 1200ipm (30.5mpm), Acc/Dec83.3 in/sec² Axis Travel: 149" (3784mm) x 82" (2082mm) x 8.5" (215mm) Positioning: ±0.0008" (0.02mm) linear axis repeatability accuracy Control System: Fanuc Panel i With integrated PC and 19" color display Dust Collection Interface: 6" (152mm) diameter (recommended volume 900 cfm) Includes: Dekker Vacuum Pump NOTE: The above specs are taken from literature and considered accurate. As always please take advantage of the inspection period to verify. Items seen in the background are NOT a part of this Lot.