Equipment For Sale

Filtering

Reset All 

thru
 Used     New
Viewing Page 204 of 503
10043 Results Found
Sort By 
$ 160,000

2015 John Deere 753J -12000 hours -Uc 90% -Receipts for: -New undercarriage -New swing pump -Swing motor and reliefs on the swing -Hydraulic pumps resealed -Over 60k worth of repairs -Tight and dry

Josh Digirolamo
828-302-7264
Call

$ 109,500

2010 John Deere 753J, 11,890 hrs., Quadco OFH 360 20B Head, Deere 6068 Turbo Diesel Engine, 2 spd. Trans., Undercarriage roughly 40%, 24" single grouser pads, EROPS, Heat/AC, Radio, Joystick controls, preheater, $109,500

 Greenland, MI
Pats Heavy Equipment
906-883-3800
Call

$ 170,000

2012 John Deere 753J -10717 hours -Brand new sprockets and idlers -New ecm -Oil pan gasket replaced and rear main seal -New Hydraulic pump no hours on it -21" Quadco 360 head

Josh Digirolamo
828-302-7264
Call

$ 108,000

2018 John Deere 643L -5600 hours -Tight and dry -FD45 head -Disk in good shape

Josh Digirolamo
828-302-7264
Call

$ 75,000

2016 John Deere 643L, 8,400 hrs., new Reman eng., 28L tires w/dual rings, tight & dry, $75,000

 Whigham, GA
Knight Equipment Company, Inc.
229-762-3500
Call

$ 90,000

Just out of the shop. We replaced the saw head with a nice FD55. Saw head checks out. New carbide teeth installed. Cylinders packed as needed. Replaced front valve bank. Pins and bushings replaced as needed. Nice clean cutter. Ready to work. Other tires available upon request.

 Moncks Corner, SC
W & W Truck & Tractor Inc.
843-312-1018
Call

$ 67,500

John Deere 643L Feller Buncher, FD22B saw, 30.5's, good job ready machine

 Maplesville, AL
Heart of Dixie Parts & Equipment
334-366-2778
Call

$ 136,000

2019 DEERE 643L II Wheel Feller Buncher L330 Hours- 4,388 FD55 Head Felling Head- Yes Felling Head Type- Saw 30.5 tires @ 60% HD axles Serial Number- 1DW643LBTJF693605 Clean straight unit!!

Vernon Novak
828-773-6456
Call

$ 186,000

2019 John Deere 643ll -5000 hrs -Brand new teeth -Tight and dry -Working everyday hours will go up clean machine

Josh Digirolamo
828-302-7264
Call

Call for Price

Parting out 644G loader For more information, please call or text Tim at 251-366-3237 or call Gavin at 601-410-3416

 State Line, MS
AlaMiss, Inc.
601-848-7811
Call

Call for Price

Parting out 644G loader For more information, please call or text Tim at 251-366-3237 or call Gavin at 601-410-3416

 State Line, MS
AlaMiss, Inc.
601-848-7811
Call

$ 20,000

1995 644G loader parting out machine. Has good engine $9500.00 . Has Wicker forks $6500.00 lots of parts on this loader, the transmission needs repairs. Forks have been removed but if you want the whole machine we can put them back on. For more information you can contact Gavin 601/394/7796 Tim 251/366/3237 Kameron 251/242/5493 located at 467 Saint Peter Street State Line MS 39362 ALL SALES ARE CASH, CASHIERS CHECK OR BANK TRANSFER.

 State Line, MS
AlaMiss, Inc.
601-848-7811
Call

$ 50,000

This 2004 644J John Deere front end loader was being used at a mill at the time of us buying it. We have put a brand new main hydraulic axial piston pump from John Deere in it, replaced the hydraulic filter, and replaced the main hydraulic oil filter. The tires are in good shape and the inside is okay. This loader is ready to work as is. If interested in this loader call Kameron 251/242/5493 Tim 251/366/3237 Gavin 601/394/7796 The loader is located in State Line, MS, 39362, at Old 467 Saint Peter Street.

 State Line, MS
AlaMiss, Inc.
601-848-7811
Call

$ 189,000

2013 Deere 753J Feller Buncher, FR 22 360 Degree Head, Undercarriage 90%, ONLY 6,500 Original Hours, Enclosed Cab with Heat and Air Conditioning, Back up Camera, Fire Suppression. Length: 31 ft 0 in Width: 11 ft 5 in Height: 13 ft 2 in Weight: 53,950 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Erie, PA
NEF Equipment
855-251-2648
Call

$ 174,900

2012 Deere 753J Feller Buncher, Equipped with a Quadco 22" 360 Degree Wrist. New Hydraulic Pump New Oil Pan and sealed Rear Main Seals. New Sprockets , Idler, New Rear Mains, New ECM Computer, Only 11,000 Hours, HEAT AND AC in cab. Ready for the woods. Weight W/O Attachment 50,480 lb Width 10.44ft in Height 11.32ft in Length 11.67ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Blakeslee, PA
NEF Equipment
855-251-2648
Call

$ 118,500

2014 John Deere 753JH -18000 hours -New pumps and engine done 2021 -Waratah 622b head -Timber rite computer system -Tight machine -Heat A/c works More pictures coming soon

Josh Digirolamo
828-302-7264
Call

$ 275,000

2018 John Deere 824K-II -9,744 hours -6.25CY bucket pin on -2 valve w/ joystick -26.5R25 Tires Radials (70% tread ) -A/C & ride control -Serviced every 500 hours -Machine used daily, hours will increase

Josh Digirolamo
828-302-7264
Call

Call for Price

2013 John Deere 848H

T & L Equipment Sales
570-889-3636
Call

$ 65,000

Deere 848H Dual Arch Grapple Skidder, Chains All Around, Clean Machine Inside and Out, Ready for the Woods.

 Constantia, NY
Kleis Equipment LLC
315-623-2111
Call

$ 139,000

2014 John Deere 848H, 12.100 hrs., Blade, Grapple, Winch, AC, this machine has been through our shop and all functions work. ready for the woods, $139,000

 Rison, AR
River Ridge Equipment
870-325-6465
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved