Equipment For Sale

Caterpillar 515 Parts Machine All Parts Are There Except Motor, Tranny, and Winch Cab Is Included But Not Pictured Good Rear End Good Blade Good Blade Cylinders Good Turn Cylinders SN: 07Z34261

Caterpillar Generator 40 KW Single phase Silent package 225 gallon fuel tank 554 hours Work ready

2014 Caterpillar 559C Log Loader 12k hours Delimber Hyd landing gear Plated trailer Tight and dry Work ready PRICE REDUCED

2017 Caterpillar 525D Skidder Dual arch No winch 9,000 hours Currently on job working

MLS Number 11539883 Caterpillar 966/972 Sorting Log Grapple H or K model Needs cylinders Has been welded

2007 CAT 501 TRACKED HARVESTER 6 CYL CAT FOUR ROLLER HEAD INDEPENDENT COUNTER

2015 CATERPILLAR 559C Log Loader Hours- 4,785 Serial Number- CAT0559CKKB400319 Cab/AC/Heat, The dealer installed a new CAT Engine Jewell 6x6 trailer Job ready Delivery is available at the buyer’s expense

2012 Caterpillar 525C Single arch Winch Rebuilt tranny New top end New injectors New Heui pump 30.5s in pretty good shape 16k hrs Runs and operates good Using daily

CTR 426, hydraulic crawler trailer, GLK55 grapple, fully serviced and ready to work.

CTR 426, crawler trailer, GLK55 grapple, serviced and ready to work.

2014 Cat 522B Feller Buncher with 360 Degree Hotsaw, Low 5350 hours. Price Includes a complete new Undercarriage. Good running machine.

2015 Cat 574 Forwarder 8WD, 10100 Hours, New Cat Long Block 700 Hours Ago, Set of Clark Tracks. Clean Machine inside and out.

2007 Caterpillar 525C Swing Grapple -11,762 hours -24.5x32 tires -Chains -Has a bunching grapple Machine is work ready

2017 Cat 330FL Excavator, 6126 hours, Rear camera, Cage, It needs a cylinder for the hydraulic thumb, U/C in very good condition. Weight: 69,950 lbs Length: 34.08 ft Width: 10.83 ft Height: 11.08 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

CAT attachment

CATERPILLAR 311D Hydraulic ExcavatorThe 311D’s hydraulic system is designed for high efficiency and performance. Spacious and quiet, this world class cab lets the operator focus on performance and productivity.Specifications: -- Engine: Caterpillar C4.2 Acert Turbo Diesel 2-Speed -- Net Power @ 2200 RPM: 60 kW / 82 HP -- Bucket size: 28" -- Thumb: 13.5" -- Steel Tracks: 23.5" Equipped with: -- Pre-start Check and Monitor Display -- Heat -- AM/FM StereoNote: Serviced approx. 100 hours ago and has 4732.5 hours total. A "gray market" Caterpillar machine with parts available.

CATERPILLAR 309 CR Mini Hydraulic ExcavatorThe 309 CR Mini Excavator delivers maximum power and performance in a mini size to help you work in a wide range of applications. Specifications: -- Engine: Model Cat C3.3B -- Rated Net Power @ 2,200 rpm -- U.S. EPA Tier 4 Final: 52.4 kW / 70.3 HP -- Machine Swing Speed 10.6 RPM -- Travel Speed – High 4.9 km/h 3.1 MPH -- Travel Speed – Low 2.6 km/h 1.6 MPH -- Fuel Tank 147 L 39 gal Equipped with: -- Sealed and Pressurized Cab -- Steel Tracks with Pads -- Stick Steer Mode -- Travel Cruise Control -- Control Pattern Changer -- Bucket -- Hours: 862Additional attachments available for extra cost upon request

CATERPILLAR 303E CR Mini Hydraulic ExcavatorThe 303E CR Mini Hydraulic Excavator delivers high performance, durability and versatility in a compact design to help you work in a variety of applications.Specifications: -- Engine: Cat C1.3 -- Gross Power: 24.8 HP(18.5 kW) -- Travel Speed (Low): 1.5 MPH (2.4 km/h) -- Travel Speed (High): 2.8 MPH (4.5 km/h) -- Vertical Wall: 77" (1960 mm) -- Boom In Reach: 83" (2110 mm) -- Dig Depth: 108" (2750 mm) -- Machine Swing Speed: 9.00 rpm -- Boom Swing – Left: 80° -- Boom Swing – Right: 50° -- Fuel Tank: 11.90 gal -- Hours: 465Equipped with: -- 1-way and 2-way (combined function) auxiliary hydraulic lines -- Hydraulic thumb -- Manual quick attach -- Control pattern changer -- Dozer blade with float function -- Foot travel pedals -- Rubber track -- Standard stick -- Suspension seat

CATERPILLAR M318C WHEELED EXCAVATOR w/ SCRAP MAGNETFeatures: -- (2) sets of outriggers -- 48" Magnet -- Generator onboard for magnetHours: Approx. 4,536

This grapple has been reworked in our shop. The grapple has been line bored and the cylinder pin bosses have been fabricated out of new round stock. New pins and bushings through out. Cylinders inspected and repacked. Grapple has been tested. Tight and dry.