Equipment For Sale

2005 Tigercat 240B -13,000 hours -5.9 Cummins -Tight loader with small leaks -Lights good -Tires good -Plumbed for saw

2014 TIGERCAT 630E SKIDDER Dual Arch Winch Heat/AC 12600 Hours

2018 TigerCat 604E -3xxx hours -Winch like new -EHS -Chains -Center is tight

724D drive MOTOR ATTACHED TO TRANS WILL SELL TOGETHER OR SEPERATE LEFT drive motor PN#AQ092 $4500.00/RIGHT DRIVE MOTOR PN#AQ093 $4500.00 + shipping Call Gavin 601/410/3416 Call or text Tim 251/366/3237 Located at 467 St. Peter’s st stateline ms 39362

,718 Tigercat Feller Buncher, Hot Saw, 8800 Hours , Ready to work!

2009 Tigercat 845C Feller Buncher, Tigercat 5702 22" with 360 Degree Head,14.000 Hours, Enclosed Cab with Heat and Air Conditioning, Undercarriage is 50% Ready for the Woods. Weight 57,100 lbs Length 16 ft 2 in Width 10 ft 9 in Height 11 ft 0 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2012 Tigercat 610C -17864 frame hours -Previous owner did engine -40,000lb winch -Very tight machine -Tires 85% percent -Has a new front axle replaced in Feb 2024

2005 Tigercat 822 Feller Buncher, Equipped with a Koehring 24" Hot Saw with 90 Degrees, Enclosed Cab with Heat and Air Conditioning, Engine is a Cummins 8.3 Diesel with 6,900 Hours, Undercarriage is 90%, Ready for the Woods. Length 13 ft 11 in Width 10 ft 0 in Height 11 ft 0 in Weight 52,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

TC ST5702 FELLING SAW S/N 57T0349, TELEMATICS, 340 DEG HI TQ HI ROT WRIST AND BOOM

2021 Tigercat 630H -6047 hours -Brand new rear end -Still working in woods -Can provide service records -35.5 tires 2 Brand new tires on the rear -Blows cold air -DEF deleted

2015 Tigercat 234

2009 Tigercat 620C

2018 Tigercat 250D -10,807 hours -Tight and dry -Turntable is tight -Tires and lights are good -Delimber Woods ready

2013 Tigercat 720E Feller Buncher 5600 Head with new teeth & disk. 30.5 X 32 tires 11,100 hours.

2013 Tigercat 620D Grapple Skidder, Winch, Has Cummins Engine, 1,250 Hours, Tires are 35.5, Dual Rings on on Rims, Enclosed Cab with Heat Air Radio, Every Pin and Bushing Replaced on the machine, New Parking Brake, Glass is Good, Exhaust Good, All Arch Pins Lined and Re-bored, Ready for the Woods. DIMENSIONS with standard tires and arch LENGTH 23'9" WIDTH 11' HEIGHT 10'4" WEIGHT 36,250 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2009 Tigercat 822C Processor with 24,000 hours. Includes a Logmax 7000 Processor Head, Machine Runs Stong, Undercarriage 60%, Version 5 Computer, Engine was rebuilt at one time, Heat and Air Conditioning in Cab Ready for the Woods. Operating Weight W/O Attachment 54,000 lb Overall Length 14.59ft in Overall Width 10.93ft in Height To Top Of Cab 10.93ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2005 Tigercat 244 Log Loader, 2006 Big John Trailer with CTR Delimber and Topping Saw, CTR Ground Saw, Cummins 5.9 Diesel Engine Enclosed Cab Heat and AC, Ready for the Woods. Length: 15 ft 7 in Width: 10 ft 0 in Height: 11 ft 0 in Weight: 36,500 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2010 Bandit 4680T Track Horizontal Grinder, Equipped with a Caterpillar C-27 1050 HP Engine,3700 Hours Currently, Undercarriage is 85%, Machine has 2" and 3" Screens, 2nd Owner, Wireless Control, New HG600 Clutch, New Head and Tail Shaft, New Conveyor Belt, Compressor on machine, Ready for Work. Weight 95,200 lbs Width 140 in Height 152 in Length 492 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2024 Tigercat 6900 -960 hours -Cat C-27 -On board air compressor -Full warranty still -Drag chains like new Using everyday!!!!

Nice late model cutter that has been through our shop. Tight and dry. Has rear camera. Very little wear on disc. Deep Firestone rubber. 30.5s. Ready to go to work.