Equipment For Sale

BALEMASTER - 48 X 72, ...Horizontal Closed Door Baler -- Designed for baling of whole or flattened corrugated boxes. -- Large feed opening to accommodate feed of larger material. -- Large 48" x 36" x 72" bale; weighs up to 1,700 pounds. -- Perfect for a Qarehouse application. -- 25 HP Moroe

Balestrini "MICRON" Slot Mortiser:Sprcifications -- Dual spindle system, (1) each side with tables and overhead holddown, 3 HP - 9,000 RPM spindles, (60 - 350) oscillations/Min, 18 mm collet dia. -- Capacity: 4-23/32" (120 mm) Max. length of slot, 3-1/8" (80 mm) max. slot depth, 1-3/16" (30 mm) max. slot thickness. - Hourly production rate of (500 - 800) slots.

BALESTRINI 2 CAP Mortiser --Automatically mortises or bores round holes in chairs or case good --Specifications -- Twin tables with pneumatic holddown clamps, (1) on each side eliminating dead cycle time, 19" long tables tilt left or right 0ø to 20ø. --Equipped with & Features -- 3 HP - 9,000 RPM Spindle motor and 1 HP oscillation motor. -- Spindles are mounted on prismatic guides with adjustable bronze gibs and move by rack & pinion, -- (120) to (240) oscillations/Min; 4-23/32" max. oscillation length, -- 3-1/8" max. depth, 7/8" max. bit dia., 13 mm spindle collet dia.

BALESTRINI - "MICRON": Slot MortiserSpecifications -- Dual Spindle System (1) Each side with: Tables and overhead holddown; 3 HP - 9,000 RPM spindles; (60 - 350) oscillations/Min; 18 mm collet dia. -- Capacity: 4-23/32" (120 mm) Max. length of slot; 3-1/8" (80 mm) max. slot depth; 1-3/16" (30 mm) max. slot thickness.Hourly production rate: (500 - 800) Slots.

BALESTRINI MINI C 2500 DOUBLE SIDED TEMPLATE PROFILE SHAPERSpecifications: -- (2) Offset shaping heads with 10 HP (7.5 kW), 230/460 volt three phase drives. (1 each side) -- Maximum reciprocating length 98" (2500 mm). -- Maximum height 7" (180 mm). -- Maximum width between spindles 8", and shaping heads are staggered for full end rounding. -- 1¼"; Diameter work arbors with 7″ under the nut capacity, and Spindle speed of 8400 RPM -- Hydraulic stroke of 9-3/4″ wide x 110″ long tee slotted work table, with feed speeds of 3 - 49 feet per minute (1-15 m/Min.) powered by 3 HP, 230/460 volt three phase hydraulic pump -- Overhead beam clamp bar with (4) adjustable clamps. -- Push button operator control station.

BALESTRINI - 2 CAP: MortiserAutomatically mortises or bores round holes in chairs or case good.Specifications -- Twin tables with: Pneumatic holddown clamps, (1) on each side eliminating dead cycle time; 19" long tables tilt left or right 0° to 20°.Equipped with & Features: -- 3 HP - 9,000 RPM Spindle motor and 1 HP oscillation motor. -- Spindles are mounted on prismatic guides with: Adjustable bronze gibs and move by rack & pinion. -- (120 - 240) Oscillations/Min; 4-23/32" max. oscillation length. -- 3-1/8" Max. depth; 7/8" max. bit dia.; 13 mm spindle collet dia.

2006 Bandit 4680 Beast Recycler, Cat 3412 1,000hp with 6,000 hrs, 30 Tooth Mill, Radio Remote, Magnetic Head Pulley Length: 36’ Width: 10’ 11” Height: 13’4” Weight: 93,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2005 Bandit Model 4680 Horizontal Grinder, Tri Axle Machine, Cummins 1000 HP Engine, Hours Unknown, Will have hours soon, Radio Remote Control, 4 " and New 2" Screens for Regrind. Length: 36’ Width: 10’ 11” Height: 13’4” Weight: 93,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2018 Bandit 2090xp 20" Drum Chipper, Cummins 350hp with 2378hrs. New clutch 500hrs ago, Radio Remote, Hydraulic Stabilizer, Hydraulic Discharge. Weight: 19,700 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

New In Stock Bandit 60FM Mulching Heads. Call for Pricing.

2021 Bandit SG-75 Tracked Stump Grinder, 75HP Kohler, Remote, Blade, Clean Low Hour Machine, Can Ship Nationwide.

2020 Bandit 1425 Horzontal Grinder, Cat 120hp with 81 hours, Radio Remote, Magnetic Pulley, Extra Parts, Excellent Condition. Weight 12,500 lbs Width 98 in Height 120 in Length 288 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2007 Bandit 1590 18” Drum Chipper, 140hp John Deere with 5000 hours, Winch, Telescoping tongue, Cone holder, Hand crank turn and height adjustable discharge, Lift cylinder, Auto Feed, New engine harness, Just serviced and tires, One owner in very good condition ready to work. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2023 Bandit 2590 Whole Tree Chipper -300 Hours -CAT C18 755H.P -Deleted NO DEF -All the bells and whistles. -Just serviced -Remote -Reversible knives

2023 Bandit 18XP Drum Chipper, 1220 Hours, Ford 165HP Gas Engine, Hydraulic Winch, New Clutch just installed, Ready for Work.

2022 Bandit INTIMIDATOR 15XP Chipper with 378 hours on a PSI 5.7L 165 hp Engine, No PTO, Gas Engine, Murphy PV380 Panel W/ Reversing Auto Feed. Length:15’ 7” Width: 6’ 6” Height 8’ 8” Weight: 8,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2010 Bandit 2290 Track Whole Tree Chipper, 6,000 Hours, John Deere 350 HP Engine, 7 sets of extra knives, Babbit Included, Enclosed Cab with Heat and no AC, Rotobec Grapple, Undercarriage is 75%, Cat Infeed Chain 5-1/2 Foot long, Ready for the Woods. Length: 21’ Width: 10’ 2” Height: 11’ 6” Weight: 40,000 - 46,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2013 Bandit 2290 Track Chipper with 5,700 Hours, Deere 600 HP Turbo Engine, Caterpillar 325 Undercarriage, Infeed System 5-1/2' Wireless Remote System, Enclosed Cab with Heat and AC, Electronic Controls updated by Bandit, Pumps updated to a larger pump, 2nd Owner. Ready for the woods. Weight:40,000 - 46,000 lbs Length:21 feet Width:10 feet 2 inches Height:11 feet 6 inches Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2006 Bandit 2090 20” Drum Chipper, John Deere 200hp with 1803 hours, Auto Feed, Winch, Hydraulic Turn Discharge and Jack. Weight: 19,700 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Cat C-18 755 HP Only 1100 Hours