Equipment For Sale

JESCO 211751 Self-Dumping Hopper.Super Heavy Duty Construction. -- 2,000 Lbs. Cap. and 2 cu. yd. Hopper. -- 12-Gauge all-welded body with 8-Gauge base for long equipment life. -- Dimensions 64" L x 59" W x 46" H with 2-1/4" H x 14" W x 48" L fork openings. -- Engineered to dump when the locking mechanism is tripped and to return to the upright position when empty. -- Safety retaining chain. -- Unit weight 600 lbs..

New 35 Ton Ag Hydraulic Detach, 53’x102, 34' Well, 33” Heavy Duty 3 Beam Aluminum Slide-outs, 14’ Overall Width, 4 Position Front and Rear Adjustable Ride Height 18-24", Manual Override, Air Ride Suspension, Liquid Air Gauge, Lockable Toolbox, Aluminum Front Deck, Full Center Apitong Wood Floor, Full Covered Rear Deck, 255/70R 22.5 Tires, Strobe Lights with Battery Backup, Keyhole Tie Downs on 3’ Centers, Drings on 6’ Centers Prices are plus FET

JET EHVS-80 6"; x 89" Non-Oscillating Horizontal/Vertical Edge SanderSpecifications: -- Table size 12-1/2"; x 37"; x 3/4"; Thick, Table tilt 0° - 90°. -- Platen size 7" x 34". -- Belt speed 3,900 SFPM.Equipped with: -- 6" x 89" Abrasive belt. -- 1-1/2 HP 3,600 RPM Direct drive motor.Palletized Dimensions: 50" x 31" x 44" H.

JET EHVS-80 EDGE SANDER (NON-OSCILLATING)(Single-Phase) ---Price Negotiable---Make an Offer!--- - 6” x 89" Non-Oscillating Horizontal/Vertical Edge Sander - Table size 12-1/2” x 37” x 3/4” Thick, Table tilt 0° - 90° - Platen size 7" x 34" - Belt speed 3,900 SFPM - 6" x 89" Abrasive belt - 1-1/2 HP 3,600 RPM Direct drive motor - Palletized Dimensions: 50" x 31" x 44" H

Jet Turret Milling Machine

JET - JC-3CF: Cyclone Dust CollectorCyclone action separates the heavier chips & particles and disposes of them into a 55-gallon drum. -- 3 HP with 1,450 CFM -- Inlet size 8", Outlet size 8". -- Large 8-fin, 14" steel impeller creates high velocity air flow that allows the lighter dust to pass through and be trapped in the filter. -- Filter bag provides: Almost 40 sq/ft. of filtration surface area for all dust particles 5-micron and larger. -- Collection bags: "Snap-In" design for quick & easy installation and removal. -- Use of JET's "EXCLUSIVE" pressure tube allows the use of a plastic collection bag in the drum without the bag getting sucked into the Cyclone. -- Special rectangular inlet pipe adds separation and additional air flow. -- Steel construction with: Welded seams & powder coated paint ensures long, dependable performance.

19' Platform Height 25'6" Working Height 30" Platform Width Expandable Platform Non Marking Tires Onboard Charger Upper Controls Lower Controls

JLG Man Lift

2012 JLG Manlift, 35’ Boom, jib Boom, Tracks, Showing 4000 Hours, Nice

ZERO SALES TAX FOR OUT OF STATE SALES! ZERO DEALERSHIP FEES! ZERO NONSENSE! ULTRA LOW RATE IN HOUSE FINANCING FOR BUSINESS AND INDIVIDUALS! 60 ft Max Lift Height, 500 lb Max Weight Capacity, Jib, Power to Platform, Tier 4, 2014 US EPA Label, Kubota 1 Cylinder 4.5 kW 0.276L Diesel Engine, 36x14LL-22.5 Tires Shipping Not Included- Call For Pricing!

35’ reach, 2250 hours, dual fuel, 4WD

2014 JLG G5-18A Stand-Up Reach Forklift with 1,157 hours. 74 hp, Max lift Ht. 18.05ft in, Max Forward reach 10.83ft in. Lift Capacity 5,500 lbs. Operating Weight 10,800.5lb 12.6ft in Height 6.4ft in Width 6ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2006 JLG G6-42A Stand-Up Reach Forklift with 4,093 hours. Max Lift Height 42ft in, Max Forward Reach 28.97ft in, Lift Capacity 6,600 lb. Operating Weight 20,399.4lb Length To Fork Face 17.72ft in Width Over Tires 7.91ft in Overall Height 7.81ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2020 JLG 1732 Pneumatic Tire Forklift with 5,084 hours on a diesel engine. Load backrest, Overhead Guard, and Enclosed Cab. Fork Length 72", Max Ht. 30'. Tires have 45% tread remaining. Weight 34,418 Length: 233 in Width: 97 in Height: 8 ft 9 in. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

JLT 79F-12-PC Multi Level Panel Clamp12' Wide, free-standing or wall mount Clamp Rack unit.Equipped with: -- (5) Levels for mounting clamps; -- (6) clamps per level (a total of 30) manually adjusted - side-to-side and manual open-and-close for all clamps. -- Clamps have a 40" opening with a 3-1/2" high x 4" wide jaw.Available Options: -- Pneumatic panel flattener with single lever valve operation, 40" reach and flatten up to 1-1/2" thick material, additional: ...$1,500 -- Glue applicator Redi spreader 6" x 27" grid capacity, additional ...$ 1,200 -- Glue applicator Plate spreader 8" x 48" grid capacity, additional ...$2,350 -- Clamp 3 1/2" X 40" opening ... $ 149 -- 79-1680-Handle $110 for use with 1/2" drive impact gun (adjustable torque preferred with setting of 50-55 ft/lbsFloor space requirement: 144" x 78" x 52" high

JLT 79F-16-PC Multi Level Panel Clamp16' Wide, free-standing or wall mount Clamp Rack unit.Equipped with: -- (5) Levels for mounting clamps; -- (36) clamps total manually adjusted - side-to-side and manual open-and-close for all clamps. -- Clamps # 302-40-H-R with 40" opening with a 3-1/2" high x 4" wide jaw. -- (72) # 80-1706 Rocker adaptor plates for up to 6" thick glue stock -- (1) Fastener and shim kit for precise clamp alignmentAvailable Options: -- Pneumatic panel flattener with single lever valve operation, 40" reach and flatten up to 1-1/2" thick material, additional: ...$1,500 -- Glue applicator Redi spreader 6" x 27" grid capacity, additional ...$ 1,200 -- Glue applicator Plate spreader 8" x 48" grid capacity, additional ...$2,350 -- Clamp 3 1/2" X 40" opening ... $ 149 -- 79-1680-Handle $110 for use with 1/2" drive impact gun (adjustable torque preferred with setting of 50-55 ft/lbsFloor space requirement: 16' x 52"W x 70" high

JLT 79F- 6-PC Multi Level Panel Clamp6' Wide, free-standing or wall mount Clamp Rack unit.Equipped with: -- (5) Levels for mounting clamps; -- (8) clamps manually adjusted - side-to-side and manual open-and-close for all clamps. -- Clamps have a 40" opening with a 3-1/2" high x 4" wide jaw. (52" clamp available upon request)Available Options: -- Pneumatic panel flattener with single lever valve operation, 40" reach and flatten up to 1-1/2" thick material, additional: ...$1,500 -- Glue applicator Redi spreader 6" x 27" grid capacity, additional ...$ 1,200 -- Glue applicator Plate spreader 8" x 48" grid capacity, additional ...$2,350 -- Clamp 3 1/2" X 40" opening ... $ 149 -- 79-1680-Handle $110 for use with 1/2" drive impact gun (adjustable torque preferred with setting of 50-55 ft/lbsFloor space requirement: 75" x 70" x 48" high

JLT 79F-8-PC Multi Level Panel Clamp8' Wide, free-standing or wall mount Clamp Rack unit.Equipped with: -- (5) Levels for mounting clamps; -- (18) clamps manually adjusted - side-to-side and manual open-and-close for all clamps. -- Clamps have a 40" opening with a 3-1/2" high x 4" wide jaw.Available Options: -- Pneumatic panel flattener with single lever valve operation, 40" reach and flatten up to 1-1/2" thick material, additional: ...$1,500 -- Glue applicator Redi spreader 6" x 27" grid capacity, additional ...$ 1,200 -- Glue applicator Plate spreader 8" x 48" grid capacity, additional ...$2,350 -- Clamp 3 1/2" X 40" opening ... $ 149 -- 79-1680-Handle $110 for use with 1/2" drive impact gun (adjustable torque preferred with setting of 50-55 ft/lbsFloor space requirement: 100" x 70" x 48" high

JLT CLAMPS 79F-M2-6-1R Single Row Panel ClampEdge Glue and Face Glue a variety of solid wood components. Produce 10+ edge glued panels per day with a Standard Setup. -- Taylor’s Patented and Successful Clamp Arm Design Features: -- 6' Single Row Panel Clamp level. -- Free Standing Unit with 500 lbs. Weight Capacity. -- 100% Complete Tubular Steel Construction. -- Complete 3 Year WarrantyIncludes: -- (6) 3 1/2″ High jaw 40″ Clamps. -- Optional 52″ Clamps Available on Request(Photo Is a Generic of Single Row Panel Clamps)

JLT CLAMPS 180A-M2-52 Pneumatic Panel Flattener. -- Complete with; Air System and Docking attachment with 52" reach and up to 2-1/2" material thickness.Additional Thickness Capacities Available (4" & 6")