Equipment For Sale

Very nice 2019 Tigercat dual arch skidder. Ran through our shop and everything checks out mechanically. All new pins and bushings. New glass. Joystick control. HD axles with 95% Firestones. Deep rubber 30.5s. Equipment financing and delivery available.

2005 Tigercat 240B Log Loader -11412 frame hours -Heat/cold ac -Delimber -Lights -Decent tires -Brakes -New knives -New topping saw bar/chain -Good Tigercat grapple -On the job working

1999 Tigercat 726B Feller Buncher, 9700 Hours, New Cummins 8.3 Remaned Engine with Low Hours, All Cylinders Repacked, Enclosed Cab with Heat, Tires are 30.5 x 32 Center Section is Good. Ready for the Woods Length 20 ft 0 in Width 9 ft 9 in Height 11 ft 0 in Weight 28,040 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2021 Tiger Cat LSX870D -3432 hours -Leveling cab -Grapple being rebuilt -Tight and dry Clean machine!!!!

CSI PTD264 delimber & Pitts carrier included. CSI DL-4400 saws shown are not included.

2013 Tigercat 620D Grapple Skidder, Winch, Has Cummins Engine, 1,250 Hours, Tires are 35.5, Dual Rings on on Rims, Enclosed Cab with Heat Air Radio, Every Pin and Bushing Replaced on the machine, New Parking Brake, Glass is Good, Exhaust Good, All Arch Pins Lined and Re-bored, Ready for the Woods. DIMENSIONS with standard tires and arch LENGTH 23'9" WIDTH 11' HEIGHT 10'4" WEIGHT 36,250 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2012 Tigercat 610C -17864 frame hours -Previous owner did engine -40,000lb winch -Very tight machine -Tires 85% percent -Has a new front axle replaced in Feb 2024

1999 Tigercat 630B -14000 frame hours -4200 on 8.3l Cummins -New fuel filter -Greased -Two boom cylinders will be needed re-repacked -Top center pin is a little bit loose but almost don’t notice yet Functional woods ready skidder

36" Triple grouser pads, low hours for age, well cared for. engine rebuilt at 10k hours

2018 Tigercat 720G Feller Buncher with 6900 hours, Tight and Dry Machine, Disk 75%, Tires 75%, New packings in cylinders, One owner. Weight 34,250 lbs Length 24 ft 0 in Width 8 ft 4 in Height 11 ft 0 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2005 Tigercat 240B Log Loader, Equipped with Enclosed Cab with Heat and Air Conditioning, CTR450, New Topping Saw, Decent Tires and Brakes, Hours are 11,400. Length 15 ft 10 in Width 8 ft 6 in Height 11 ft 1 in Weight 38,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2007 Tigercat 720E, runs good but does need a saw disk. We plan to put a disk on it. So it'll be ready for the woods when purchased. Located on our yard at 437 Saint Peter Street State Line MS 39362 For more information you can call Gavin 601/394/7796 Call or text - Tim 251/366/3237 Kameron-251/242/5493 ALL SALES ON USED EQUIPMENT ARE CASH, CASHIERS CHECK OR BANK TRANSFER.

30.5 tires, winch, 19’ grapple, very well maintained machine, serviced and ready to work.

2021 Tigercat 632H -2375 hours -Tight and dry -No screen damage -No oil leaks - 2 tires are new (44's) -Warranty's through -Drivetrain 9-30-24 -Structural 9-30-25 -Emissons 9-30-26 or 3000 hours Ready to work!!!!!!!

Tigercat 630D with Cummins, engine needs assembled and installed - Special Pricing or Possibly Part Out

2015 Tigercat -12,790 hours -New transmission -New rearend -All work with receipts -Few small leaks -Tires are good one is slick

2016 880 Tigercat log loader 16- square grapple. Hoe chuck grapple also available. New grapple has less than 2,000 hours and cost almost a hundred thousand dollars and works awesome! 8,200 hrs.

Call for details

2018 TIGERCAT 234B, 8,400 hrs., Hydraulic control - Clean & Tight! $125,000

2022 TIGERCAT 620H, 6,900 hrs., tight, dry and straight! $175,000