Equipment For Sale
9687 Results Found
$ 345,000
$ 235,000
2023 Deere 648LII Dual Arch Grapple Skidder with Winch, 30.5 Rubber with New Bear Paw Chains All Around, New John Deere Complete Engine with Warranty just installed. Clean Machine ready for work.
$ 158,000
2013 Deere 753J Feller Buncher, FR 22 360 Degree Head, Undercarriage 90%, ONLY 6,500 Original Hours, Enclosed Cab with Heat and Air Conditioning, Back up Camera, Fire Suppression. Length: 31 ft 0 in Width: 11 ft 5 in Height: 13 ft 2 in Weight: 53,950 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
Call for Price
JOHN DEERE 85G Mid-Sized ExcavatorNeither too big nor too small, these right-size excavators are the perfect solution for a wide varietyof tasks.Specifications: -- Engine: Net Power 56.9 HP at 2,000 rpm ( (ISO 9249) 42.4 kW) -- Engine Cylinders: 4 -- Powertrain: 2-speed propel with automatic shift - Low 3.1 km/h (1.9 mph) - High 5.0 km/h (3.1 mph) - Drawbar Pull 6650 kgf (14,661 lb.) -- Swing Speed: 10.5 rpm -- Fuel Tank 31.7 gal -- Hours: 710Equipped with: -- AC and Heated Cab -- Front blade -- Multifunction, color LCD monitor -- 2-speed propel with automatic shift -- Electronic engine control -- Reduced-drift valve for boom down, arm in -- Auxiliary hydraulic valve section -- Work lights: Halogen / 1 mounted on boom / 1 mounted on frameThe 85G comes equipped with an independent-swing boom that enables work close to curbs, parallel to structures, or alongsidetraffic. We can provide financing and also the most economical delivery to your location.
$ 615,000
2024 John Deere 2654G Processor -800 hours -Waratah 623C head -36" triple grouser pads Like New!!!!
Call for Price
2016 John Deere 803MH Processor with 10,000 hrs, 622B Wartah Head with a 3/4 chain on the main saw and 404 chain on the top saw. Has the updated hydraulic pumps, Air ride seat, XM radio, Touch screen monitor, The head had the pins and bushings replaced, everything is nice and tight, It comes with a oregon sharpener and extra chains and bars. Operating Weight 66,888.3 lb Height Over Cab 135.04ft in Length Of Tracks 15.13ft in Width 10.76ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
$ 62,900
2004 JOHN DEERE 748GIII DUAL ARCH GRAPPLE SKIDDER 6 CYL DEERE NEW CENTER PONS AND BUSHINGS BLADE PINS AND BUSHINGS
$ 62,500
648GIII JD single arch skidder with winch, cold air, 28Lx26 tires, been through the shop, nice job ready skidder
$ 80,000
$ 75,000
John Deere 437E Loader with CSI 264 Ultra delimber, HYD LEG trailer, nice machine ready to work
$ 47,500
John Deere 540E Cable Skidder 2nd owner Early 90s Rebuilt engine and tranny 23.1x26 tires in great shape Center section tight 20k frame hours Runs and operates great
$ 190,000
32" Pads, 42" Bucket, Cab w/ AC, Mechanical Thumb, Short Arm, Standard Boom, Standard Track
$ 56,000
2 Speed, 78" Bucket, A/C, Cab Enclosure, Cab w/ AC, EH Controls, General Purpose Bkt, Narrow Rubber Tracks, Self-Leveling, Wide Rubber Tracks
$ 67,000
2 Speed, 84" Bucket, Air Ride Seat, Cab w/ AC, General Purpose Bkt, Reversing Fan, Ride Control, Self-Leveling, Wide Rubber Tracks
$ 82,000
84" Bucket, Air Ride Seat, Aux Hydraulics, Cab w/ AC, EH Joystick Controls, Foot Controls, H Pattern, Hi-Flo, ISO Pattern, Reversing Fan, Ride Control, Self-Leveling, Wide Rubber Tracks
$ 180,000
30.5 Tires, Cab w/ AC, Cable Skidder, Direct Drive Trans, Heavy Duty Axles, Limb Risers, Stacking Blade, Winch