Equipment For Sale

JESCO 211381 Self-Dumping Hopper. Super Heavy Duty Construction. -- Huge 6,000 Lbs. Cap. and 4 cu. yd. Hopper. -- 7-Gauge all-welded body for long equipment life. -- Dimensions 71" L x 85" W x 59" H with 3" H x 10" W x 39" L fork openings. -- Engineered to dump when the locking mechanism is tripped and to return to the upright position when empty. -- Safety retaining chain. -- Unit weight 1,385 Lbs.

Jet J-2500 Drill Press Features: --3-1/8" stroke for deep hole applications -- Cast iron head -- Large ground steel column for maximum head and table support -- Telescoping safety spindle guard -- The enclosed spindle assembly is supported by four permanently lubricated ball bearings for greater precision and accuracySpecifications: -- Capacity: 15" -- Motor: 3/4 HP -- Table Size (L x W) (In.) 11-1/2 x 11-1/2 -- Table Travel (In.) 24 -- Base Dimensions (In.) 11 x 19-1/2 -- Column Diameter (In.) 2-7/8 -- Distance Column to Spindle (In.) 7-1/2 -- Drilling Capacity Cast Iron (In.) 5/8 -- Drilling Capacity Mild Steel (In.) 1/2 -- Drills to Center of Circle (In.) 15 -- Number of Spindle Speeds 16 -- Range of Spindle Speeds (RPM) 200, 290, 350, 430, 500, 580, 640, 720, 800, 870, 1,440, 1,630, 1,820, 2,380, 2,540, 3,630 -- Work Table Weight Capacity (Lbs.) 44NOTE: The above specs are taken from literature and thought to be accurate. As always please take advantage of the inspection period to verify

JET EHVS-80 6"; x 89" Non-Oscillating Horizontal/Vertical Edge SanderSpecifications: -- Table size 12-1/2"; x 37"; x 3/4"; Thick, Table tilt 0° - 90°. -- Platen size 7" x 34". -- Belt speed 3,900 SFPM.Equipped with: -- 6" x 89" Abrasive belt. -- 1-1/2 HP 3,600 RPM Direct drive motor.Palletized Dimensions: 50" x 31" x 44" H.

JET EHVS-80 EDGE SANDER (NON-OSCILLATING)(Single-Phase) ---Price Negotiable---Make an Offer!--- - 6” x 89" Non-Oscillating Horizontal/Vertical Edge Sander - Table size 12-1/2” x 37” x 3/4” Thick, Table tilt 0° - 90° - Platen size 7" x 34" - Belt speed 3,900 SFPM - 6" x 89" Abrasive belt - 1-1/2 HP 3,600 RPM Direct drive motor - Palletized Dimensions: 50" x 31" x 44" H

JET - JC-3CF: Cyclone Dust CollectorCyclone action separates the heavier chips & particles and disposes of them into a 55-gallon drum. -- 3 HP with 1,450 CFM -- Inlet size 8", Outlet size 8". -- Large 8-fin, 14" steel impeller creates high velocity air flow that allows the lighter dust to pass through and be trapped in the filter. -- Filter bag provides: Almost 40 sq/ft. of filtration surface area for all dust particles 5-micron and larger. -- Collection bags: "Snap-In" design for quick & easy installation and removal. -- Use of JET's "EXCLUSIVE" pressure tube allows the use of a plastic collection bag in the drum without the bag getting sucked into the Cyclone. -- Special rectangular inlet pipe adds separation and additional air flow. -- Steel construction with: Welded seams & powder coated paint ensures long, dependable performance.

Jet Turret Milling Machine

New 35 Ton Ag Hydraulic Detach, 53’x102, 34' Well, 33” Heavy Duty 3 Beam Aluminum Slide-outs, 14’ Overall Width, 4 Position Front and Rear Adjustable Ride Height 18-24", Manual Override, Air Ride Suspension, Liquid Air Gauge, Lockable Toolbox, Aluminum Front Deck, Full Center Apitong Wood Floor, Full Covered Rear Deck, 255/70R 22.5 Tires, Strobe Lights with Battery Backup, Keyhole Tie Downs on 3’ Centers, Drings on 6’ Centers Prices are plus FET

35’ reach, 2250 hours, dual fuel, 4WD

2020 JLG 1732 Pneumatic Tire Forklift with 5,084 hours on a diesel engine. Load backrest, Overhead Guard, and Enclosed Cab. Fork Length 72", Max Ht. 30'. Tires have 45% tread remaining. Weight 34,418 Length: 233 in Width: 97 in Height: 8 ft 9 in. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2012 JLG Manlift, 35’ Boom, jib Boom, Tracks, Showing 4000 Hours, Nice

19' Platform Height 25'6" Working Height 30" Platform Width Expandable Platform Non Marking Tires Onboard Charger Upper Controls Lower Controls

2006 JLG G6-42A Stand-Up Reach Forklift with 4,093 hours. Max Lift Height 42ft in, Max Forward Reach 28.97ft in, Lift Capacity 6,600 lb. Operating Weight 20,399.4lb Length To Fork Face 17.72ft in Width Over Tires 7.91ft in Overall Height 7.81ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2014 JLG G5-18A Stand-Up Reach Forklift with 1,157 hours. 74 hp, Max lift Ht. 18.05ft in, Max Forward reach 10.83ft in. Lift Capacity 5,500 lbs. Operating Weight 10,800.5lb 12.6ft in Height 6.4ft in Width 6ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

ZERO SALES TAX FOR OUT OF STATE SALES! ZERO DEALERSHIP FEES! ZERO NONSENSE! ULTRA LOW RATE IN HOUSE FINANCING FOR BUSINESS AND INDIVIDUALS! 60 ft Max Lift Height, 500 lb Max Weight Capacity, Jib, Power to Platform, Tier 4, 2014 US EPA Label, Kubota 1 Cylinder 4.5 kW 0.276L Diesel Engine, 36x14LL-22.5 Tires Shipping Not Included- Call For Pricing!

JLG Man Lift

42” Capacity Pneumatic operation

JLT CLAMPS 78H-12-42-40 Mini Pod PressSingle section 12" wide x 42" long cap., 40" max. opening, 13" daylight, 30 ton max.,clamping pressure at 120 PSI, Pod Press is powered by a total of (18) 20 square inch diaphragm cylinders, upper platen has a 2" stroke when air is activated.Features: Heavy duty upper and lower steel platens, single lever valve pneumatic operation with dial regulator pressure controls, stack multiple wood components up to 12" wide and ships pre-assembled. Includes: Manual jack for platen adjustment.

JLT Clamps 302-40-H-R DOOR AND PANEL CLAMP40" Capcity clamp (min 8-1/2") Patented Equalizer Design Provides Equal Clamping from the Front and Rear Jaws, Resulting in a Higher Quality Panel. #302 Style Clamp with Standard 3-1/2" High Jaws for Increased Durability and Less Clamps Per Glue Up.Also available with 36", 44" and 52" capacities.

JLT Panel Pro Clamp Model 78D-5-S 5-Levels with (6) clamps each with panel flatner 110 v Single phase Will do 80”x 40”

This Pneumatic Vertical Clamping System features upper and lower 12" wide and up to 126" long steel platens for face gluing a variety of solid wood components. With it's modular design with each section having its own pressure control and 40" opening. -- 12" Deep x 42" wide clamping cap. -- Air operated assembly, for face gluing of engineered stiles & rails, kickers, headers, and many other solid wood applications. -- Single lever valve operation with dial regulator pressure controls for quick & accurate clamping pressure. -- Up to 30 Ton max. clamping pressure @ 120 PSI.