Equipment For Sale

Filtering

Reset All 

thru
 Used     New
Viewing Page 203 of 502
10022 Results Found
Sort By 
$ 2,500

New is 8800 selling for 2500 plus shipping PN#AT379178 Call Gavin 601/410/3416 Call or text Tim 251/366/3237 Located at 467 St. Peter’s st stateline ms 39362

 State Line, MS
AlaMiss, Inc.
601-848-7811
Call

$ 3,500

JOHN DEERE 643J COMPLETE CONTROL VALVE PN#AT347730 LIST $11,500.00 TAKE OUT FROM A SALVAGE MACHINE, NO FIRE OR HEAT EXPOSURE. GOOD CONDITION ENDS CAPPED. READY TO INSTALL PRICE REDUCED TO $3500 TEXT Tim 251-366-3237 or GAVIN 601-410-3416 NO TEXT PLEASE

 State Line, MS
AlaMiss, Inc.
601-848-7811
Call

$ 2,500

643J-843J HYDROSTATIC DRIVE PUMP/AT374509- CALL GAVIN AT 601-394-7796 OR TIM 251-366-3237

 State Line, MS
AlaMiss, Inc.
601-848-7811
Call

$ 265,000

2019 2154G John Deere processor 9,500 hours Good running condition 622B Waratah head Delivery available at buyer’s expense

Vernon Novak
828-773-6456
Call

$ 1,250

ARTICULATION DRIVESHAFT TRANS TO PARK BRAKE SN#-685564 1-AT409576 $1250

 State Line, MS
AlaMiss, Inc.
601-848-7811
Call

Call for Price

2007 John Deere 450H Dozer with 850 original hours, A/C and Heat, 6 way blade, Ready to work. Weight 15,000 lbs Length 12 ft 9 in Width 1 ft 3 in Height 8 ft 5 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 White River Junction, VT
NEF Equipment
855-251-2648
Call

$ 125

H model grapple pins 4- AT172277 $350.00 each. 2- AT356091 $125.00 each

 State Line, MS
AlaMiss, Inc.
601-848-7811
Call

$ 1,500

Oscillating universal driveshaft low serial number machine 1- AT412209. $1500.00

 State Line, MS
AlaMiss, Inc.
601-848-7811
Call

$ 259,995

360 Degree Cutter REDUCED Only 6525 Hours Woods Ready

 Folkston, GA
Carolina Used Machinery
828-773-2204
Call

Call for Price

2016 Deere 859M Feller Buncher, Includes a Deere 22" Hotsaw with 40 Degree Tilt, 3,900 Original Hours, One Owner Undercarriage is 75%, Enclosed Cab with Heat and Air Conditioning, Leveling Cab, Operating Weight 79,510 lb Base Carrier Length 16 ft 1 in Height Over Cab 12 ft 10 in Overall Width 10 ft 11 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Williston, FL
NEF Equipment
855-251-2648
Call

$ 65,000

DOZER has Erops, Sweeps Enclosed cab Screens 6 way blade Pull bar

 Livingston, TN
Big Iron Equipment Sales, LLC
931-397-1728
Call

$ 515,000

2023 John Deere 260P-ADT Articulated Dump -409 hours -Jd link -Level 2 Trim package -23.5r25 rubber -Warranty info in pictures

Josh Digirolamo
828-302-7264
Call

$ 275,000

2018 John Deere 824K-II -9,744 hours -6.25CY bucket pin on -2 valve w/ joystick -26.5R25 Tires Radials (70% tread ) -A/C & ride control -Serviced every 500 hours -Machine used daily, hours will increase

Josh Digirolamo
828-302-7264
Call

$ 5,000

John Deere MT -NON RUNNING -Clean and dry -Rubber is good -Been Restored

Josh Digirolamo
828-302-7264
Call

Call for Price

1989 Deere 648D Grapple Skidder. Winch, New Winch Drive Line, New Reat drive shaft, Rebuilt Parking Brake, New Clutch, Clutch Plate, Transmission went through, Centers are fair, Tires are 28L x 26, Hours are Reading 2,100 on Meter. Length 22 ft 7 in Width 11 ft 0 in Height 9 ft 8 in Weight 24,440 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Colorado Springs, CO
NEF Equipment
855-251-2648
Call

$ 34,000

1983 Deere 540B Grapple Skidder, Factory Deere Grapple, Winch, Needs Drive Shaft, New Shaft Cables, Doors Available, Tires are 23.1 x 26 Good Shape, Good Centers, Newer Pump, Centers Good, Ready for the Woods. Operating weight 18,675 lbs Length 242.5 inches Width 103.9 inches Height (ROPS) 115 inches Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Albany, NY
NEF Equipment
855-251-2648
Call

$ 215,000

2022 Deere 848L-II Grapple Skidder, No Winch, Engine has 4,000 Hours, Fire Suppression, Espar Heat, Enclosed Cab with Heat and Air Conditioning, Ring Chains on the machine Ready for the Woods. Weight 49,348.3 lb Length 333.4in Width 140.7in Height 27.2 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Keene, NH
NEF Equipment
855-251-2648
Call

$ 90,000

2018 John Deere 848L -9600 hours -Winch -Serviced regularly -Tight and dry -Ready to work MORE PICTURES COMING SOON !!!

Josh Digirolamo
828-302-7264
Call

$ 200,000

2015 John Deere 853MH -11,323 hours -Waratah HTH623C head machine -Tight and dry -UC is good Ready to work

Josh Digirolamo
828-302-7264
Call

Call for Price

1999 Deere 843G Buncher, 22” Head, 28L Tires 60%, 843G. New engine n pumps. Good rubber, New windshield… Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Mount Pleasant, MI
NEF Equipment
855-251-2648
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved