Equipment For Sale

2014 Ponsse Wisent Forwarder 9500 hours 2 owner Nice machine Currently on the job in use daily 2011 Ponsse Ergo processor with H7 head also available

2011 Ponsse Ergo Processor/Harvester H7 head 2 owner 13k hours Complete refurb by Ponsse Currently on the job in use daily 2014 Ponsse Wisent forwarder also available

2012 Ponsse Ergo (8 Wheel) Processor Equipped with a Mercedes 270 HP Engine with 12,500 Hours, C-4 Crane, H7 Processor Head, Enclosed cab with Heat and AC, Wabasto Pre Heater, 710 Tires around,90% on Tracks, 1 set aggressive, other standard tracks, Good Diffs, Boggies and Drivebox, Fire Suppression, 30 Day Parts Warranty. Ready for the Woods..... Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2000 Ponssee Cobra HS10 Harvester Cat 3116 125 crane Eberspacher Preheater 700/45-22.5 Tires New batteries Work ready

2011 Ponsse Ergo Processor, Includes a H-7 Head purchased from Ponsee, 13,500 Hours on Machine, Machine was refurbished with 3 pages of information, Good Center Section and Tires, Enclosed Cab with Heat and AC, Well Maintained, Tracks Front and Rear. Operating Weight 35,274 lb Shipping Length - Non Tilt 25.2 ft in Overall Width 9.32 ft in Height To Top Of Cab 12.37 ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2019 Ponsse Buffalo King Forwarder, Equipped with 2 Sets of Tracks, Leveling Crane, 11,400 Hours, Fire Suppression, Tires are 75% DEF Engine, Enclosed Cab with Heat and AC, Backup Camera, New Pump, Ready for the Woods Clean Machine Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2006 Ponsse Buffalo king -20000 hours -6 cylinder Mercedes -K100+ crane 33’ reach -New crane pump -Compete new center section -New frame lock -New steering cylinders -New extension and jib cylinders New rear differential New brake cans front and rear New rear 750 tires -New 750 tracks came with the machine(1 year old ) -360 super grip bucket -2 new front planetarys -New boom hoses -New boom extensions chains

2016 Ponsse Ergo, 12,157 hrs., $259,900

2013 Ponnse Ergo Processor, 13,000 Hours on the Engine Mercedes 270 HP Engine, C-4 Crane and H-7 Processor Head, 1000 Hours on Remaned Engine, Outer Boom Chains Replaced New Crane Bearing, Enclosed Cab with Heat and AC, Tracks available Ready for the Woods. Operating Weight 35274lb Shipping Length - Non Tilt 25.2ft in Overall Width 9.32ft in Height To Top Of Cab 12.37ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Ponsse Forwarder 2nd Gen Cab (Full Set of Windows) Starting at $4,260 for full set// Crane Side Only Starting at $1100 - Call 715.560.3929

2019 PONSEE ELEPHANT KING FORWARDER 7,585 HOURS GOOD TIRES 46,297 OPERATING WEIGHT MERCEDES 275HP ENGINE VERY GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS NO PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

2011 PONSSE ERGO 8 WHEEL HARVESTER 13,500 HOURS UPDATED OPTI H7 HEAD MERCEDES ENGINE PURCHASED FROM PONSSE IN 7/22 REFURBISHED VERY GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS NO PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

2000 Ponsse Bison -Uknown hours -Perkins 6 cylinder diesel -New iQan control system for the crane and steering (100% joystick controls) -New Webasto preheater -Tracks and tire chains included -New Red Dot heat and AC system -Brand new LED lights -Good glass on sides and rear, front isn’t bad but not new -Has a few small leaks but otherwise ready to go to work

2022 Ponsse Bear Processor -2300 hours -Tracks about 90% -Tires about 90% -Tight and dry -H8 head

2012 Ponsse Ergo Harvester with 17.800 hours and a Ponsse H7 Head. This machine has just been fully serviced. Weight 35,274lb Length 25.2ft in Width 9.32ft in Height 12.37ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2017 Ponsse Scorpion King Harvester with 11,500 hours. Includes a Ponsse H7 Head. Weight: 51,147 lbs Length: 315.7 in Width:105.9–121.5 in Height: 146.5 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2017 Ponsse Scorpion King Harvester, 13,000 hours, H7 R5500 head. Weight: 51,147 lbs Length: 315.7 in Width:105.9–121.5 in Height: 146.5 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2024 Ponsse Scorpion Giant Processor with 600 hours, H8 Head The 2024 Ponsse Scorpion Giant Processor with the H8 Head isa wheel-based harvester with a powerful, durable head for processing large trees.It's designed to be versatile and can be used in various sites. Features: H8 harvester head:This head provides a greater processing speed and can handle larger diameters.It also has smart automated systems for precise cutting. Operator comfort:The cabin is located in the middle of the machine, which improves visibility and comfort. Crane solution:The crane solution provides excellent visibility in all directions. Stability:The machine provides more stability when working on slopes. Versatility:The machine can be fitted with different harvester heads, including the H6, H7, H7HD Euca, and H8. Weight 50,706 lbs Length: 315.7 in Width: 105.9–121.5 in Height: 146.5 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2016 Ponsse Scorpin King 13,000 hours, H7 Processing Head. The Ponsse Scorpion King isa wheeled harvester with an 8WD system that's used for forestry work.It's designed to be comfortable and easy to use, with a spacious cabin and a focus on operator safety and ergonomics. Features: Engine:A Mercedes Benz EU stage V/Tier 4 Final engine with 280 horsepower Cabin:A spacious cabin with a rotating seat and storage, and a location in the middle of the machine for better visibility Crane:An overhead forked main boom with a reach of 10 or 11 meters Three hull design:Keeps the cabin level in all conditions Hydraulic system:Separate hydraulic circuits for the crane and harvester head Active Crane management system:Allows the operator to control the harvester head movement instead of individual crane functions Uses: Used for forestry work, such as harvesting timber Weight 51,147 lbs Length: 315.7 in Width: 105.9–121.5 in Height: 146.5 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.