Equipment For Sale

Recent engine, Extended fuel tank, just serviced, ready to go!

30.5 tires, winch, 19’ grapple, very well maintained machine, serviced and ready to work.

2005 Tigercat 240B Log Loader -11412 frame hours -Heat/cold ac -Delimber -Lights -Decent tires -Brakes -New knives -New topping saw bar/chain -Good Tigercat grapple -On the job working

2021 Tigercat 822D -4022 hours -UC updated at 3800 hours -Tight machine -5702 head 360 degree -Turn key

CB radio, 3 shank ripper

1993 Timbco 425D -4xxx on meter -Engine been rebuilt -Just replaced both track rails and sprockets have less that 10 hours on them -Idlers and rollers are in good shape -Everything works -Ac/heat -Radio -33” Timbco bar saw head -40 degree tilt -Cameras on the head and behind cab -All bushings are tight Ready to work very well maintained

2006 Timbco 425EXL with Logmax 7000 Processor Head, Hours are 8,000.00 Rebuilt Computer Measuring Device, Enclosed Cab with Heat and Air Conditioning, Undercarriage is 85% No Leaks, Tight Machine. Operating Weight 54,002 lbs Height - Top of Cab 12.4 ft Shipping Length - non tilt 14.6 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1993 Timbco 425 with Rolly-II Processor Head, 37" Bar Saw, New Air Bag in Head, Cummins 8.3 Diesel , Hours reading 6,769, Leveling Cab, Enclosed Cab with Heat and AC, Propac Heater, New Computer Sensor for Measurements ,No Oil Leaks or Engine Blow By , Final Drives Done Recently. Ready for the Woods... Weight 55,235 lbs Length 21 ft 4 in Width 9 ft 8 in Height 12 ft 2 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2002 Timbco 425 Feller Buncher, Equipped with a Quadco 20" Fixed Head, Leveling Cab, Enclosed Cab with Heat and Air Conditioning, New Final Drives, UC is 80-85%, Cummins 8.3 Diesel with 11000 Hours, New Windshield, Ready for the Woods. Weight 55,235 lbs Height 12 ft 2 in Width 9 ft 8 in Length 21 ft 4 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Timbco 425D with squirt boom and Waratah 620 processor. Will sell head separately

1997 Timbco 425C Equipped with a CTR Dangle Head Saw with 24" Bar Saw, Rebuilt Engine with 3000 Hours, Undercarriage is 40-45%. Tracks are Good, New Drive Rollers, Enclosed Cab with Heat and AC, Ready for the Woods. Weight 55,235 lbs Length 21'4" Width 9'8" Height 12'2" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

28” single grouser pads for 445 Timbco or 735 Timber Pro. $40 each

1994 Timbco 425B 2005 Log Max processor head 22" capacity John Deere 6068 motor with 600 hours on it UC is good 9786 hours Runs and operates good

2006 Timbco 415 Processor, Logmax 7000 Processor Head, Machine Isuzu Engine and has 6000 Hours3.5 Gallons/per hour, Undercarriage is 50%, Enclosed Cab with Heat and Air Conditioning, Ready for the Woods. Operating Weight 96,672.8 lbs Height - Top of Cab 10.7 ft Shipping Length - non tilt 13.5 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Timbco and Komatsu Main Booms for EXL and FXL, cleaned and Painted.

Timbco Bar Saw Head for Wheeled Machines $4000

Location: ALLENWOOD, PA

Timbco 415 lower car body, very low hours, excellent tracks, GFT 50 finals, drive motors.

Special pricing on Lohmann GFT 50 Final Drives for 415 Timbco/Valmet