Equipment For Sale

2015 Komatsu D155AX-8, 3934 hrs., Stk# KM17233, 3 shank ripper Eau Claire, WI, $349,500

2013 Komatsu 430XT Harvester -12040 hours -Uc 40% -Ctl head 24 inch disk -Tight and dry -Everything works as it should Woods ready

2015 Komatsu Xt 430-3 Feller Buncher -8900 hours -New UC -Fire suppression redone in march -Rebuilt pumps -Rebuilt rotation manifold -TIght and dry -Quadco 22" head(8900 hours) -360 degree tilt Woods ready

LOEWEN 08 FELLING HEAD ROTATOR FITS KOMATSU -3 CONFIGURATION FITS KOMATSU/TIMBCO BAR SAW ATTACHMENTS

2020 Komatsu XT430-5 -9000 hours -Logmax 7000XT -UC 70% -Tight and dry -Downsizing ready to work

6-WHEEL HARVESTER 650/65-26.5 FRON TIRE - 700/70-34 REAR TIRES 2011 KOMATSU 370 24" PROCESSOR/HARVESTOR WITH ROTATING LIKE ATTACHMENT (SN: 370022438), COMPUTERIZED MEASURING FEED ROLS, TOP SAW

A/C 1996 US EPA Label Steel Body Liner 23.5R25 Tires

Hydraulic thumb Aux Hydraulics Tooth Bucket Enclosed Cab Heat/AC Hour meter reads 2792 Working so hours will change daily

2018 Komatsu PC290 LC-11 excellent condition, 2,640 hours, hydraulic thumb, 60" bucket. Price Reduced! $174,500

KOMATSU D61PXi-24 Crawler DozerSpecifications: -- Engine: 126 kW / 169 HP @ 2.200 rpm (Turbocharged) -- Max. travel speed: 5.59 MPH -- Blade type: Straight -- Hours: 6,525Equipped with: -- Joystick operator controls -- IMC / GPS Machine -- A/C and Heated Enclosed Cab -- 6-Way Blade -- U-C is 65% Remaining -- Grade control -- Oscillation -- Drawbar -- Air Ride Seat

2019 Komatsu PC210LC-11 Excavator, Hydraulic Pin On Thumb, Hydraulic Coupler, Bucket. Good Running Machine.

2006 KOMATSU PC200LC LOGGING PROCESSOR -Rebuilt pumps -Rebuilt motor -80% under carriage -sprockets idlers Boom cylinders were all repacked -622B Warthoug Processing head -has new monitor -new head module -new cab module -new saw motor -Cuts up to 28" timber

Komatsu D65PX-12 Dozer SN: 62612 New UC New pump Joysticks Screens Risers Runs and operates good

430 Final Drive for Komatsu FXL Models

2014 Komatsu 445XT-L Feller Buncher, Machine has 12,000 Hours, Engine is Cummins 8.3 300 HP, Quadco 22" 360 Degree Head, Undercarriage is 75%, Enclosed Cab with Heat and Air Conditioning, Leveling Cab, Ready for the Woods. Weight 72,091 lb Height 14' 1" Width 10' 8" Length 29' 0" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2022 Komatsu 931XC Track Unit, Includes C-144 Processor Head Attachment, Computer System, ONLY 2,000 Hours, Pre Heater, Enclosed Cab with Heat and Air Conditioning, Machine is Like New Ready for the Woods. Operating weight 48,281 lbs Transport length 26.31 Transport width 9.8 Transport height12.92 Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2013 Komatsu 941.1 Harvester with 10,520 hours. New hydraulic pumps for crane and drive also a new drive motor ar 10,200 hours. Equipped with a Komatsu 370.2 head, overhauled at 9,000 hours. A second 370.2 spare head is included. Operating weight 51,809 lb Transport length 26.5 ft Transport width10 ft Transport height 13 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2017 Komatsu 931XC Processor, Equipped with a C144 Processor Head, 10,800 Hours, New Main Hydraulic Pump, New Fuel Injection Pump, 1 Set of Eco Tracks, a second set of Evo Tracks on Rear, Ready for the Woods. Weight: 48,281 lbs. Width: 9 ft. 1 in Length: 26 ft. 4 in Height: 12 ft. 11 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

KOMATSU PC238 ROTOBEC 3045 WITH SAW TOP AND FRONT CAB GUARDING

2015 Komatsu XT430-3 Logging Processor with 9,700 hours has a Wartah 616c head topping saw. Under carriage and the oil cooler recently updated. Have some spare head cylinders and a feed wheel motor to go with it. As well as a burnt parts machine with good track motors, final drives , stick cylinder, stick boom with tele boom. Good working machine ready for production! Length 25 ft 2 in Width 10 ft 4 in Height 11 ft 9 in Weight 62,240 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.