Equipment For Sale

2007 Talbert DW-55 SA Utility Trailer Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

TANA- SHARK 440DT, ... Portable Dual Shaft ShredderSpecifications: -- Approx 3900 Hours and New in 2015 --Bolt-on cleaning combs for easier maintenance --Magnet conveyor improvements - Discharge side to be selected from TCS + hydraulic magnet adjustment during operation --Rated power (SAE J1995) 399 kW (535 bhp) @2100rpm --Nominal torque 324,530 ft-lbs 440 kNm --Rotor length 9 ft 10 in --Number of rotor knives 33 / 44 --Screen sizes Available from Tana- 1.9", 3", 3.5", 3.9", 4.3", 4.7", 5.5", 6.6", 8.7", 10.8" --Screen area 29.6 sq ft

TANNEWITZ - XJ, ...Table SawSpecifications: -- 5 HP - 3,600 RPM Fan cooled motor, 1" right tilting arbor Table Saw with a 1-piece main table; table size 42" wide x 44-1/2" deep. -- Base formed from hot rolled steel of 5/16" thickness & welded into (1) solid unit; 10" dia. handwheels for easy adjustment of tilting, raising & lowering of arbor. -- Complete with: Extended rack & pinion adjustable rip fence for greater ripping capacity; left- & right-hand T-slot miters. -- 16" Blade dia., 4" dado width cap.; 4" cut depth at 90°; 3" cut depth at 45°. -- Equipped with: Taper pin miter with micrometer adjustment on fence, magnetic controlled off switch, and 6" dust outlet with auxiliary rear opening for easy access.Please NOTE: No blade guard.

16" Blade cap., 3-3/4" max. cutting height, 5 HP - 3,600 RPM direct drive motor, arbor tilts 45ø, 44" x 40" cast iron table size, table with miter gauge slot. -- Complete with: Rack & pinion fence and large hand wheels for easy adjustments.

TANNEWITZ - XJ, ...Table SawSpecifications: -- 5 HP - 3,600 RPM Fan cooled motor, 1" right tilting arbor Table Saw with a 1-piece main table; table size 42" wide x 44-1/2" deep. -- Base formed from hot rolled steel of 5/16" thickness & welded into (1) solid unit; 10" dia. handwheels for easy adjustment of tilting, raising & lowering of arbor. -- Complete with: Extended rack & pinion adjustable rip fence for greater ripping capacity; left- & right-hand T-slot miters. -- 16" Blade dia., 4" dado width cap.; 4" cut depth at 90°; 3" cut depth at 45°. -- Equipped with: Taper pin miter with micrometer adjustment on fence, magnetic controlled off switch, and 6" dust outlet with auxiliary rear opening for easy access. -- Power safety electrical breaker box included. Please NOTE: No blade guard.

Runs good and is still in operation Hooked up to 460 Table Extension has been repaired Main table has almost zero wear on it.

MLS Number 13686586 2021 Taylor X330S Forklift 3622 hours 20,600 capacity 49,200 chassis weight 96" forks Sideshifter Tires 100%

MLS Number 13686587 2021 Taylor X300S Forklift 6680 hours 20,600 pounds capacity 49,050 chassis weight 96" forks Sideshifter Tires 75%

TAYLOR 8' W 60-Section Semi-Automatic Hydraulic Clamp Carrier, with Flattener & TightenerEquipped with: -- (214) 32"; Cap. Clamps, with 4-5/8"; W x 3-1/2"; H Jaws. -- Dual air motor drives. -- Dual foot pedal control.Complete with: -- Pneumatic Panel Flattener. -- (2) Pneumatic Clamp Tighteners. -- Clamps (As pictured).

2016 Taylor TN520S Pneumatic Tire Forklift with 12,794 hours on a diesel engine. Overhead Guard, and enclosed cab. Fork Length 60" Lowered Ht. 164", Max Ht. 106". Tires have 90% tread remaining. Small leak @ oil pan gasket and Hydraulic pump seal. Weight 74,400 lb Length 22 ft. Width 10.9 ft. Height 12.2 in. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

MLS Number 13417095 2016 Taylor TN520S Forklift 12794 hours 52,000 pounds capacity 75,330 chassis weight 60" forks 164" lowered height 106" max fork height Pneumatic tires 90% Diesel

TAYLOR - 6-Section: Pneumatic Clamp Carrier6-Section x 10-1/2' width cap.; (36) total clamps; 30" opening on clamps; 3-1/2" high jaws; includes: Pneumatic rotation; tightening; panel flattening. -- Overall assembled dimensions: 9-1/2' Deep x 13-1/2' wide x 9' tall.NOTE: Teardown not included.

--In Auction: https://exfactoryauctions.com/Detail/CR-230068/event/A122024$1 --No Reserve!-- TAYLOR 800036 7' W 12-Section Semi-Automatic Pneumatic Clamp Carrier, with Flattener & Tightener Equipped with: (71) 32” Cap. Clamps, with 4-5/8” W x 3-1/2” H Jaws. Air motor drive. Dual foot pedal control. Complete with: Pneumatic Panel Flattener. Pneumatic Clamp Tightener.

TAYOR 16-Section Clamp Carrier 20.5' width cap., (7) clamps per section (128 clamps total). .48" max. clamp opening clamps with 4-1/2" X 3 1/4" jaw height (128) Rocker plates 4" X 6" @ 80-1706 (purchase in June 2024)Complete with: -- Semi-automatic clamp tightening, -- (2) Air drive carrier rotation. -- (2) Pneumatic panel flattener -- OAL approx. 24' X 14' X 12'Note: The buyer will be responsible for tear down and loadingMachine model CC 20,5-16-481

MLS Number 13019231 2018 Taylor X330S Forklift 8991 hours 33,000 pounds capacity 48,600 chassis weight 114" forks 132" lowered height 236" max height Tires 100% SS/FP

Taylor Forklift tight machine

TAYLOR - 20-Section: Clamp Carrier Specifications -- 8-1/2' Width cap. -- 39" Max. clamp opening; 2-1/2" Jaw height. -- Approx. (4) clamps per section.Equipped with: -- (75) Clamps total. -- Pneumatic tightener. -- Pneumatic panel flattener.Complete with: -- Air drive carrier rotation. -- I-Beam chain assembly.NOTE: Already taken down.

Capacity: 100,000 lbs @ 48" LC. Hours: 18,953 hours. Cummins QSX15-C400HP Tier III TPEM Electronic Turbocharged w/fuel cooler. Powershift Transmission - 4 speed w/Declutch. Modulated, Electric Shift Control and APC-120 with push button transmission shifting on joystick mounted on the right side of the seat. Rigid Ultra-VU 24, 97" Log Clamp Carriage with Kickers and 108" Forks. Note: Good Running conditions and ready to work. Call for delivered price.

Capacity: 80,000 lbs @ 48" LC. Hours: 13,200 hours. Tires: Pneumatic tires. Fuel: Diesel. Mast: 216" two-stage mast. Forks: 8 ft forks. Attachment: Side Shift and Fork Positioner. Notes: New paint. Call for delivered price.

Capacity: 36,000 lbs @ 48" LC. Mast: 18 ft mast. Forks: 8ft. Tires: Solid Pneumatic. Engine: Cummins Diesel. Attachment: Side shift, fork positioner. Hours: 10,500 and 12,700. Great Shape. Call for delivered price.