2016 John Deere 803MH Processor with 10,000 hrs, 622B Wartah Head with a 3/4 chain on the main saw and 404 chain on the top saw. Has the updated hydraulic pumps, Air ride seat, XM radio, Touch screen monitor, The head had the pins and bushings replaced, everything is nice and tight, It comes with a oregon sharpener and extra chains and bars. Operating Weight 66,888.3 lb Height Over Cab 135.04ft in Length Of Tracks 15.13ft in Width 10.76ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1996 Deere 540E Cable Skidder with 18,500 Hours, No Heat and Ac in Cab, Center Section is Tight, Tires are 18.4 x 26 Chains around Ready for the Woods. Operating Weight 21,900 lb Overall Length 19.95 ft in Overall Width 9.16 ft in Height To Top Of Cab 9.88 ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2006 Deere 753G Feller Buncher Hours 14,000, 22" Head with 45% Lateral Tilt, Undercarriage around 35%, 24" Pads enclosed Cab with Heat and Air Conditioning, New Hydraulic Motor on Saw Head, Ready for the Woods Weight 52,995 lbs Length 25 ft 8 in Width 10 ft 4 in Height 11 ft 4 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2022 Deere 848L-II Grapple Skidder, No Winch, Engine has 4,000 Hours, Fire Suppression, Espar Heat, Enclosed Cab with Heat and Air Conditioning, Ring Chains on the machine Ready for the Woods. Weight 49,348.3 lb Length 333.4in Width 140.7in Height 27.2 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1983 Deere 540B Grapple Skidder, Factory Deere Grapple, Winch, Needs Drive Shaft, New Shaft Cables, Doors Available, Tires are 23.1 x 26 Good Shape, Good Centers, Newer Pump, Centers Good, Ready for the Woods. Operating weight 18,675 lbs Length 242.5 inches Width 103.9 inches Height (ROPS) 115 inches Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2016 Deere 948L Dual Arch Skidder, Engine has ONLY 6000 Original Hours, Enclosed Cab with Heat and Air Conditioning, New Tire Chains around 35.5 Tires, Center Section is Tight. Operating Weight 49,418.9 lb Overall Length 333.4 in Overall Width 140.7 in Height Over Cab 136 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1989 Deere 648D Grapple Skidder. Winch, New Winch Drive Line, New Reat drive shaft, Rebuilt Parking Brake, New Clutch, Clutch Plate, Transmission went through, Centers are fair, Tires are 28L x 26, Hours are Reading 2,100 on Meter. Length 22 ft 7 in Width 11 ft 0 in Height 9 ft 8 in Weight 24,440 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2018 Deere 853M Feller Buncher Equipped with a FD55 Cutter Head, 6,600 Original Hours, Enclosed Cab with Heat and Air Conditioning, Undercarriage is 60%, Repacked Cylinders on Head, 2022 Swivel Bearings Replaced, Serviced Recently Ready for the Woods. Operating Weight 67,704lb Overall Width 10.83 ft in Length Of Track On Ground 12.7 ft in Ground Clearance 31 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2016 John Deere 1910 E Forwarder, Double Bunk, Engine has 19,000 Frame Hours, Strong Running Machine, Eco Tracks Front and Rear, New Transmission and New Front End Pumpkin Last Year, New Drive Line One Owner Machine, New Seat, Extra Parts Available. Ready for the Woods. Weight - 48,060 lb Length - 35' Height - 12.8' Width - 10.15' Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2012 Deere 703JH Harvester, with Waratah HTH622B head,14,020 frame hours. Main saw motor resealed July 2021, new computer on head December 2021, Main seal on motor done December 2021, All new bushings on grab arms April 2022, grab arm cylinders repacked 2022, New encoders on saw and diameter. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2016 Deere 853M Feller Buncher with 5,500 hours. Operating Weight 67,704lb Overall Width 10.83 ft in Length Of Track On Ground 12.7 ft in Ground Clearance 31 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2007 Morbark Model 23 WCL Whole Tree Chipper, Caterpillar 3412 1000 HP Twin Turbo Engine. Has 9,000 Original Hours, Heat and Ac, AC needs a Charge, New Computer, New Injectors, All Cylinders recently Repacked, All New Hoses, Ready for the Woods Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2014 Morbark Flail 223 Debarker, has a Caterpillar 9.3 that's been deleted. It has 9,249 frame hours and 600 on the engine rebuild. New Hydraulic Clutch Last Year, New Rear Feed Wheels 23" Capacity Ready for the Woods. Length (transport) 33'5" Height (transport) 9'11" Width 9'10" Weight 46,700 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1996 Morbark Model 20 Whole Tree Chipper ,Caterpillar 425 HP Engine, Enclosed Cab with Heat and AC, Needs a Condenser for the AC, Machine has Separator ,Ready for the Woods... Overall Length 21’6” Overall Width 8’0” Overall Height 13’6” Weight 10,000 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2021 Morbark 6400XT Track Horizontal Grinder C32 Cat diesel with 1890 hours, Cat platinum warranty 5 years or 8000 hours. 42" x 61 3/8" Hammermill System w/ 28" diamter rotor and 1" thick rotor plates 40" diameter feed roll Dust Suppression System Hydraulically operated debris containment door Rod Puller 325L GD CAT undercarriage with double grouser pads, Ready to Grind… Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2016 Morbark 4600XL Horzontal Track Grinder, Cat C27 with 7,500 hours, Magnetic Head Pulley, Radio Remote. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2013 Morbark 6600 Wood Hog Horzontal Grinder, Cat C32 with 8400 hours, Parked it 6 months ago. It ran until it was parked. Remote works. Known issues: Needs muffler Needs pto O ring Under side of yoke needs to be cut out and new plate put in. It ran till the day they cut it off so I’m sure they can get it running fairly quick. Needs a good amount of welding work under the yoke and around the mill. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1993 Morbark Model 1200 Tub Grinder, Equipped with a Cummins 650 HP Engine, Autofeed, Wireless Control, New Clutch 1 year ago, Hours are Unknown, New Turbo, New Injectors 300 Hours ago, Ready to Work. Weight 55,622 lb Length 38.15 ft Width 11.9 ft Height 12.8 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1998 Morbark 2400 Chipper, ONLY 1800 Original Hours, Perkins 185 HP Turbo Diesel Engine, Hydraulic Tongue Jack, Hydraulic Lift Assist Cylinder, Twin Disc SP 211 Clutch, Tires are at 50%, In Excellent Condition. Two Owner Machine, Ready for Work. Weight: 15,000 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2004 Morbark 50/48 Whole Tree Drum Chipper. 11,000 hours on a rebuilt 3412 CAT engine with 760HP, Auto Feed, Fire Suppression, Radio Remote and Tether cord. Machine was repainted. Length 40'8.25" Height 12'6" Width 9'9" Gross Weight (approx.) 72,120 lb