Laguna Bandt 4 Edgebander Machine is 6 months old Extremely low hours - Buyer upgraded to a larger machine!

Larick 220 is designed for use with flexible brush type sanding wheels. (2) counter rotating spindles with 1 HP motors 1" dia. x 6" arbors with 6" travel Variable speeds 100-1200 RPM 60" x 24" table 36" height...2" travel 220 volt single phase Less than 100 hours since purchased in February 2021

Model # 01-1172-05-01 60” x 142” table size (2) available pricing is each no hydraulic units

Leadermac LMC 418-S 4 head moulder 20-80 FPM feed spiral head on bottom 460 volt 3 phase

Leadermac Hypermac LMC-630H Moulder 6-Head Machinewith Outboard Bearings MFG specs (to be confirmed): HEAD HP CUTTERHEAD SWING HOOD SIZE 1) 1st Bottom Head 20 HP 4.9” to 7.1” (125 – 180 mm) 5.9” (150 mm) 2) Right Side Head 20 HP 4.4” to 9.1” (112 – 232 mm) 5.9” (150 mm) 3) Left Side Head 20 HP 4.4” to 9.1” (112 – 232 mm) 5.9” (150 mm) 4) 1st Top Head 25 HP 3.9” to 8.8” (100 – 225 mm) 5.9” (150 mm) 5) 2nd Top Head 25 HP 3.9” to 8.8” (100 – 225 mm) 5.9” (150 mm) 6) 2nd Bottom Head 25 HP 3.9” to 8.8” (100 – 225 mm) 5.9” (150 mm) side heads are opposed. Directly Opposed Side Heads in lieu of staggered side heads including Air/Hydraulic Quick secure Position Locking System Easy set motorized positioning system for near side and top head Increased spindle speeds to 8000 RPM in lieu of standard 6000-RPM With 8000 rpm Spindles you will realize a 33% increase in productivity over std. 6,000 rpm Hydro-Loc Quick Change Outboard Bearings Timing belt (Poly Chain) Drives on 2 Top Heads & Last Bottom Head 2 part Sectional Pad Pressure Plates after 2nd Top Head with 2 separate pressures and fine adjustment to the outside shoe in lieu of single pressure plate Pneumatically operated Auto Feed Table Lubrication System utilizing Stand Alone Operators Control Console on HD wheels w/1.6.5 ft of Remote – Hand held Pendant Push Button Control (Jog Forward/Reverse Beam Up/Down) with 12 feet of power cord to help with setup Pneumatic Low Pressure Safety Control (if the air pressure drops below the accepted run level the moulder will shut down or will not operate)

- Main motor: 30 HP, 220V/440V (wired for 220V), 3-phase, 72.9A/36.4A - Elevation motor: 1/2 HP, 1.94A/0.97A - Hydraulic pressure: 100 PSI - Maximum cutting capacity: 6" x 9" - Distance from blade to conveyor table: 1/4"–10" - Feed speed: 0–61 MPM - Saw blade size: 180" L x 1" W - Wheel size: 28" dia. x 7/8" W - Overall size: 85" W x 108" D x 83-1/2" H - Approximate shipping weight: 4325 lbs.

Leadermac LMC-623H Moulder with Infeed Deck This system has not run in year and will need repair.

Leadermac Moulder 12" Capacity 10-Heads: #1 10 HP, #2 25 HP, #3 25 HP, #4 25 HP, #5 25 HP, #6 30 HP, #7 30 HP, #8 30 HP, #9 30 HP, #10 15 HP 140 FPM with 15 HP feed motor ATS Heads on Top and Sides Second machine available for parts only: Spare castings, gearboxes, pendulums, control panel, spindles

Lico Rip System with 5-Moving Blades Includes: Infeed, tilt hoist, unscrambler, Lico infeed, 125 HP gang, outfeed tunnel, 75' sort chain Lateral Scanners High speed roller gang with (5) shifting blades: Up to 500 FPM Two Scanmeg scanners Singulating infeed Saw infeed fence Hogging blade to remove inside edging Outside edging falls off and into shredder New system upgrades in 2018

Rip Saw Model SDL 1200 Edging Conveyor Model UHY 1900

Ligmatech Return Conveyor

Lobo 6-Head Moulder 9" Wide capacity

Year: 2006 Working Width: 25mm to 230mm (1" to 9") Working Thickness: 8mm to 120mm (0.31" to 4.72") Bottom Spindles (x2): 40mm diameter, 0-20mm transverse movement, 6000 RPM, 5.5kW (7.5 HP) Top Spindles (x2): 40mm diameter, 0-20mm transverse movement, 6000 RPM, 7.5kW (10 HP) Side Spindles (x2): 40mm diameter, 0-20mm transverse movement, 6000 RPM, 5.5kW (7.5 HP) Configuration: Bottom, Side, Side, Top, Top, Bottom Feed Motor: 4kW (5.5 HP) Elevation Motor: 0.75kW (1 HP)

Loewer Discmaster 6TD Brush Sander Vacuum Bed

Lower Denibbing Sander

Logmaster LM5 Sawmill 2" Blades 36" Max log diameter Hydraulic: Log loader, turner, log tapers 75 HP Electric Motor

MAC 114LST100 Dust Collector 12x10 Rotary Airlock Hopper and leveling screws Air flow: 18,000 ACFM Media: 2,000 sq ft 12 Gauge Carbon steel exterior Clean air plenum Guard rail Nema 4 enclosureHopper discharge to match airlock Magnehelic pressure differential gauge kit (100) 6" x 144" 16 oz Polyester bags 60 HP Motor, 460 V System has already been dismantled and is ready to load.

This system was purchased used and never put into service.

- Min. panel length 9.06 inch - Max. panel length 10 ft 5.98 inch - Min. panel width 8.27 inch - Max. panel width 4 ft 3.18 inch - Panel stack station - no. stations 1 loading - Max. panel stack height 5 ft 2.99 inch - Work capacity 13 Cycles/min - Lifting capacity 100 Kg - Panel stack infeed - Movement system with frame System suction cups - Vacuum pump - no. pumps 1 - Control system - PLC MAGELIS

Makor Start One M (S-ONE-M) Finishing Line Infeed & Outfeed System Storage Trolleys This line has been removed from operation and is in dry storage, as shown in the last (3) photos.