Capacities: 11” minimum length 98” maximum length 1” minimum width 32” maximum width 5/8” minimum thickness 3” maximum thickness with a conversed glue spreader(model 30J)

CMS represents Big on Dry (BOD) Thermo Wood Kilns in the USA. This system is another on elf our customers in the USA who is producing mostly poplar and oak decking. Big on Dry has improved the Thermo-Modification process with their THERMOWOOD (THW) line and provides complete "turn key" systems. The PLC control systems allow programming for a wide variety off wood applications. This allows the same systems to work with very delicate wood that is hard to treat to thicker wood that will be used for outdoor products. The THW system can also be used as a conventional kiln with steam. Basic systems include: - Kiln completely built with stainless steel and aluminum - Initial humidy of 10-15% is reduced to 5-6% - Loading options: Side or Trolley - Heating options: Gas or Wood Burner - Humidification: Combined Spraying System

Thermwood C42 CNC Router (2) 5'x5' Tables It has 2 large routers, 4 smaller routers, and 2 aggregate heads in the turret Travainni Vacuum Pump Note from Seller: Includes two shaper heads that are not mounted into the turret and one pneumatic drill head that is not mounted into the turret. I also have one seat of Microvellum cabinetry program that I will transfer to you along with the purchase.

Thomas Edgebander Return 42" x 19'

Thomas Return Conveyor This was used behind a Holzher Edgebander

Tidland 470 Sander This system was used in a particle board plant that has been closed around 10 years.

- Automated push feed saw system for fast and accurate cutting of wood and plastic - Adjustable cutting envelope so you can set the envelope to the needed width of the material you are cutting, whether single piece or pack - Tigersaw 1000's Dynamic Optimization software give you the best yield by determining the optimal cutting order from your parts list - Value based optimizing allows the operator to value items in a cut list individually - Accuracy: +/- .012" - Push capacity: 90 lbs.(on flat tables) - Cutting envelope with 450 mm blade: 1" x 16" up to 5" x 6" - Cutting envelope with 500 blade: 1" x 16" up to 6" x 6" - Maximum clearance length for loading: 12' - Material feeds right to left - 24" wide x 18' long flat infeed table - 24" wide x 12' long roller outfeed table - Complete guarding of the saw blade area, safety interlocked guard door and saw blade door (neither can be opened while running) - Saw motor: 10 hp - Dust collection requirements: 600 cfm (4" dust port) - Air requirements: 85 psi (water and oil free air) - Electrical: 15 full load amps on 460 volt

Automated push feed saw system for fast and accurate cutting of wood and plastic Adjustable cutting envelope so you can set the envelope to the needed width of the material you are cutting, whether single piece or pack Tigersaw 1000's Dynamic Optimization software give you the best yield by determining the optimal cutting order from your parts list (Will cut the mark) Value based optimizing allows the operator to value items in a cut list individually Download parts files to Tigersaw 1000, comes with TigerLink 6 (Tigerstop's cut list downloading software) Accuracy: +/- .012" Push capacity: 90 lbs.(on flat tables) Cutting envelope with 450 mm blade: 1" x 16" up to 5" x 6" Cutting envelope with 500 blade: 1" x 16" up to 6" x 6" Maximum clearance length for loading: 12' Material feeds right to left 24" wide x 18' long flat infeed table 24" wide x 12' long roller outfeed table Complete guarding of the saw blade area, safety interlocked guard door and saw blade door (neither can be opened while running) Saw motor: 10 hp Dust collection requirements: 600 cfm (4" dust port) Air requirements: 85 psi (water and oil free air) Electrical: 15 full load amps on 460 volt INCLUDES: Tablet package: TigerTouch software loaded onto a Surface Pro tablet. Includes downloading software (DNLD), Dynamic optimization software (OPT), and TigerSET software (SET). Label printer

Tigercat 240B with Washer Saw Still under power and available for inspection.

2013 Tigercat 720E Feller Buncher 5600 Head with new teeth & disk. 30.5 X 32 tires 11,100 hours.

This system was purchased new and never installed. It is available to ship immediately. System includes: - Timberland Big Jake 6000 Scragg Mill: First saw set: Log Diameter: 8" minx22" max, Log Length: 96" Min x 20'6" max, (2) 56" Circle Saws, (2) 125 HP Motors, Setworks, Second Saw Set: (2) 48" Blades, (2) 75 HP Motors, Auto Adjust to center log, Operator Station with Joystick Controls - Brewco B1618 2-Head Grade Resaw (there are three 2-heads systems in this package fro a total of six resows): Setworks, Cutting cap: 18" x 18", 3-strand steel flat top infeed chain, 2" Blade, 60 HP Motor, 40" Band Wheels, Setworks - Hydraulic Unit for System: 50 HP, 100-Gallon, Temperature Controlled.

Timesavers Single Head Sander Combination Head Model 2311-45-6 Includes transformer

Single Head Top and Bottom Sander

Timesavers 43" Speedsander Single Phase Machine

Only 697 hours, taken from service (2) top heads - one orbit, one brush (1) 3HP main orbit motor (1) 3HP feed motor (1) 1HP brush motor (1) 1HP oscillation motor 460V Max. stock width 36" Max. thickness 6" 32-38" variable passline height 2,000 CFM @ 5,000 FPM exhaust air requirements

TIMESAVERS 4331-45-001 Wide belt sander (3) heads 51" width cap. 1st Head 9-1/2" Dia. rubber covered (60-65 Duro) 40HP motor 2nd Head 9-1/2"Dia. rubber covered (60-65 Duro) 30HP motor 3rd Head Combination head with 6" dia rubber covered contact roll and a 2-1/2" finishing platen. 30HP motor. 52" x 103" abrasive belts with dual "posi-trac" electronic-solid state tracking Controls mounted on belt loading side Conveyor feed belt replaced (2) years ago.

Timesavers Model 2321-24-01 Sander 43"x75" Belts 2-Head IceClean System on each head

Timesavers Model 2331-04-334 3-Head Orbital Sander 43" Machine

22" blade Manual operated 460v 3phase 15 HP motor

Position 1 005023 Panel Feeding and Loading TOMASSINI-RAPID/C 100-130 DOP Position 2 005024 Roller Conveyors TOMASSINI-TA CINGHIE-SPEC Position 3 005029 Roller Conveyors TOMASSINI-TA CINGHIE-SPEC Position 5 005030 Roller Conveyors TOMASSINI-TA 78 130 S-SPEC Position 7 005031 Brushing Machines MECCANICA VIESSE-SP 1300 Position 8 005032 Panel Stacking and Offloading TOMASSINI-RAPID/S 100-130 DOP