704-841-2001
Backed with a massive machinery database considered to be “the blue book” of woodworking machinery), EX-FACTORY Auctions provides a complete assessment of your equipment and allows you to interact with the market real-time in our dynamic Online Auction!
Industry
BioMass
217 Results Found
704-841-2001
PRESTO P3-AA ROUND PNEUMATIC AIRBAG LOAD LEVELERTurntable top with easy turning anti-friction bearings allows users to spin loads so they are always working from the near side without having to walk around the unit.Specifications: -- Automatic positions loads between 9-1/2" and 27-3/4" -- Small base allows workers to stand up close to the P3 at any position -- Stable design requires no floor lagging -- Build fork pockets for easy lagging, -- Load capacity 4,000 Lbs -- Raised height 27-3/4" -- Lowered height 9-1/2" -- Overall base 36" W x 36" L -- Turntable diameter 43-5/8" -- Shipping weight 450 Lbs
$44,500
RADER - Trailer Dumper with 30 ft. Tipping DeckComes with the following components and features: -- This unit was installed at the current location in approx. 1971 and is reportedly in great working order and condition. -- Previously used for Dumping Wood Chip Trailers. -- Professional rigging and loading is available. Decks are often extended for longer (53 ft.) trailers.
RAPTOR - MINI TG, ...Tire Grinder / ShredderRAPTOR Tire Grinders are the most durable and easy to use Shredders built. Specfications: -- Feed opening: 33" x 36". -- Main motor: 200 HP. -- Size material down to: 3/4". -- Screen size: 3/4". -- Separates steel from rubber: 75% to 80%. -- Capacity: 2 Tons per hour (approx.).Equipped with: -- Full hardened knives. -- Electric control panel. -- Stand and infeed hopper.NOTE: New beearings and seals, a rebuilt gearbox, rebuilt gear reducer, and rebuilt electric motors. New frame and screen, too!
REM - CC10, ...Used Can FlattenerThe REM Can Crusher is a complete separating, crushing, and blowing unit for aluminum cans.Specifications: -- Efficiently processes: 1,800 - 2,000 Lbs per hour. -- Load cans in the hopper and the conveyor carries the cans across the magnetic head pulley separating the steel from aluminum. -- The aluminum cans are crushed between a steel pressure plate and the rotating crusher drum with hardened steel bars; the cans then drop into a high-velocity air stream and are blown into a trailer or storage container. -- Features: 16" Wide belt; Crusher with: 10 HP 240/480-Volt, 3-phase; Blower with: 7.5 HP 240/480-Volt, 3-phase.
Call for Price
REM - CC-5, ...Used Can FlattenerDescription --The REM Can Crusher is a complete separating, crushing, and blowing unit for aluminum cans. -- Efficiently process 900 -1,000 Lbs per hour. -- Load cans in the hopper and the conveyor carries the cans across the magnetic head pulley separating the steel from aluminum. -- The aluminum cans are crushed between a steel pressure plate and a rotating crusher drum with hardened steel bars; the cans then drop into a high-velocity air stream and are blown into a trailer or storage container. --Includes: 16" Wide belt; crusher with 5hp
$17,950
RES 2500 25" Gas Powered Alligator Shear Description -- Approx 10 Hours --Blade Length 25.25" --Blade Opening Tip To Tip 14" --Motor Size 10 HP, 220v or 440v / 3ph --Jaw Fully Open 11 Cuts Per Minute --Jaw 1 1/2" Open 63 Cuts Per Minute --Dimensions (L x W x H) 72 1/2" x 32 3/4" x 45 1/4" --÷Weight 2500 lbs --Shear Height 32 1/8" --Foot Pedal Control Automatic/ Single Stroke --Maximum Cutting Force 110 Tons --Cutting Capacity Mild Steel --Round Bar 2 1/4" Dia. --Angles 3" x 3/8" --Flats 6" x 3/4" --T Section 3" x 3" x 3/8" --I Beams 4" x 1 3/4" x 5 1b. --Square Bar 1 3/4" --Channels 4" x 2" x 8 1b. --Plate 25" x 1/4"
REX MFG. 75 KVA RC75H1-J, 460/600 Three-Phase Auto TransformerSpecifications & Features: -- 75 KVA Auto-ventilated "dry type", 3-phase Auto Transformer. -- 460 Volt primary, 575/600 Volt secondary. -- Manufactured with 3-legged cores and high quality, grain oriented silicon steel; core steel is precision cut and stacked for reduced noise and losses; cores clamped with heavy steel brackets. -- The 75-460/600 Transformer coil windings have high quality copper magnet wire; Class 220° C insulation is utilized throughout the coil winding process; coil is impregnated and baked in Polyester resin varnish. -- Complete with: -- Substantial cooling ducts for effective cooling. -- NEMA 1 rated Heavy Gauge steel enclosure w/ventilation openings. -- UL & CSA approved. -- Includes: -- Delivery anywhere in the Continental USA.
REX MFG. 200 KVA RC200H-G1/50 480/400 Three-Phase Auto TransformerSpecifications & Features: -- 200 KVA Auto-ventilated "dry type", 3-phase Auto Transformer. -- 480 Volt primary, 400 Volt secondary. -- Manufactured with 3-legged cores and high quality, grain oriented silicon steel; core steel is precision cut and stacked for reduced noise and losses; cores clamped with heavy steel brackets. -- Coil windings have high quality copper magnet wire; Class 220° C insulation is utilized throughout the coil winding process; coil is impregnated and baked in Polyester resin varnish. -- Complete with: -- Substantial cooling ducts for effective cooling. -- NEMA 3R rated Heavy Gauge steel enclosure w/ventilation openings; sprinkler proof. -- UL & CSA approved.
REX MFG. 30-208/600 Auto TransformerSpecifications & Features: -- 30 KVA Auto-ventilated "dry type", 3-phase Auto Transformer; 208 Volt primary, 600 Volt secondary. -- Manufactured with 3-legged cores and high quality, grain oriented silicon steel; core steel is precision cut and stacked for reduced noise and losses; cores clamped with heavy steel brackets.Complete with: -- Coil windings with high quality copper magnet wire; -- Class 220° C insulation is utilized througout the coil winding process; -- Coil is impregnated and baked in Polyester resin varnish; substantial cooling ducts for effective cooling.Includes: -- NEMA 3R Indoor, sprinkler proof steel enclosure; -- UL & CSA approval; delivery anywhere in the Continental USA.
REX MFG. 75 KVA RC75C2-F/N 220/380 Three-Phase Auto TransformerSpecifications & Features: -- 75 KVA Auto-ventilated "dry type", 3-phase Auto Transformer. -- 220 Volt primary, 380 Volt secondary. -- Manufactured with 3-legged cores and high quality, grain oriented silicon steel; core steel is precision cut and stacked for reduced noise and losses; cores clamped with heavy steel brackets. -- The 75-460/600 Transformer coil windings have high quality copper magnet wire; Class 220° C insulation is utilized througout the coil winding process; coil is impregnated and baked in Polyester resin varnish. -- Complete with: -- Substantial cooling ducts for effective cooling. -- NEMA 3R rated Heavy Gauge steel enclosure w/ventilation openings; sprinkler proof. -- UL & CSA approved. -- Includes: -- Delivery anywhere in the Continental USA.
REX MFG. 200 KVA RC200C-F/N 240/380 Three-Phase Auto TransformerSpecifications & Features: -- 200 KVA Auto-ventilated "dry type", 3-phase Auto Transformer. -- 240 Volt primary, 380 Volt secondary. -- Manufactured with 3-legged cores and high quality, grain oriented silicon steel; core steel is precision cut and stacked for reduced noise and losses; cores clamped with heavy steel brackets. -- The 75-460/600 Transformer coil windings have high quality copper magnet wire; Class 220° C insulation is utilized througout the coil winding process; coil is impregnated and baked in Polyester resin varnish. -- Complete with: -- Substantial cooling ducts for effective cooling. -- NEMA 3R rated Heavy Gauge steel enclosure w/ventilation openings; sprinkler proof. -- UL & CSA approved. -- Includes: -- Delivery anywhere in the Continental USA.
ROBUST SD 45 Vertical Low Noise Grinder; The model SD 45 is characterized by low power consumption, high productivity, and ease to use.Features: -- Universal use (diverse wood, particle boards, veneer, MDF plates, cardboard boxes, plastics, etc.); -- Completely automatic operation -- The engine start-up is controlled by the star/triangle system -- Hardened knives with four cutting edges with an extended service life -- The crushing unit without any mechanical obstacles that could cause stopping -- The HARDOX sieve -- Simple installation, plug-in and start-up -- Economic use of energy -- Extremely quiet operation -- Simple and minimum maintenanceTechnical Specifications: -- Motor: 20 HP (15 kW) -- Rotor diameter: 150 mm -- Rotor speed 140 RPM 140 -- Number of knives: ) 17 (15 + 2) -- Top opening 640 mm x 430 mm ( 25.2" X 17") -- Dust extraction size 152 mm diameter -- Weight 950 Kg (2090 Lbs) -- Screen with holes available from 10 to 50 mm (comes standard with 12 mm screen) -- Production capacity: Approx. 0,5 - 1,5 Cubic meters per minute
ROBUST SD 60E Low Noise Vertical GrinderFeatures: -- One-piece machined cutterhead without welding for increased accuracy in knife fastening. -- The inserts can be used on their four (4) sides, which reduces operating and tooling costs. -- Overload protection. -- Several dimensions of HARDOX Screen available according to your requisitions.Technical Specifications: -- Motor (18.5KW) - 25CV/600V/60C/3Ph -- Top opening 946 mm x 567 mm (37" X 22.3") -- Cutterhead diameter 222 mm -- Cutterhead speed 80 à 120 RPM -- Quantity of TCT tips 14 ( + 2 latéral) -- Productiion capacity 3 à 4 m3/hour The capacity varies according to the dimensions of the grill, the type of wood and its humidity rate . -- Rear screen dimensions of holes 10 à 30 mm -- Dust hood 160 mm -- Machine dimensions 1881(L) x 1115(W) x 1670(H) (70" X 44" X 65.7")
ROBUST SD 70 Low Noise Vertical Wood Waste GrinderBasic machine features: -- BOVER_BASIC intelligent control system -- Power set (electric motor, reduction gear, and belt transmission) -- Vertical hopper -- Hydraulic pressure unit -- Robust and adjustable -- Hardened knives with four cutting edges with an extended service life -- Hardened cleaning knives -- Hardened cutting racks -- HARDOX sieve -- The motor start-up is controlled by the star/triangle systemTechnical Specifications: -- Main motor 30 kW (40 HP) -- Top Opening: 1445 mm × 1345mm ( 56.8" X 53") -- Rotor working length: 650 mm -- Rotor diameter: 270 mm -- Number of knives: 28 -- Screen hole diameter 10 - 50 mm -- Production capacity: 3 - 5 Cubic meter -- Weight : 1,750 Kg (3,850 Lbs) -- OAL 1973 mm X 1548 mm (77.6" X 61")
$195,000
RONNING ENGINEERING Single Pass 10.5' X 40' Dryer/Cooling Drum;Complete with the following components: -- Like new condition, used approximately 1000 hours. -- Trunnion bases with Wheels & Drum Guide Idler. -- Gearbox/base (no motor). -- Insulation -- Endplates. -- This is a hi-performance design with full panel flighting originally set up as a cooling drum. The heat exchange surface is greatly increased with the addition of the panel flighting for which other standard single pass coolers/dryers would need to be much larger to compete with. -- Originally, this was set up has a cooling drum, but by simply reversing the air flow would make it an equally hi performance single pass dryer.
(2) RUF 1100+ Briquetter SystemComplete with the following features and components: -- RUF Briquetting Machines are exceptionally strong and low maintenance. The Presses are simple, compact, and can be installed almost anywhere. The machines are designed to run (24) hours a day. If the material to be briquetted is fed automatically into the hopper, then no operating personnel is required. -- Machine Cap.: 2,200 - 2,600 Lbs/Hr. -- Moisture Content: <15% acceptable, <12% preferred. -- Machine Production: Up to 600 Briquettes/Hour (each Briquetter); approx. (16,000) total operating hours.Machine Specifications: ● Input voltage: 480 Volt, 60 Hz, 3 Phase. ● Control voltage: 24 Volt DC. ● Hydraulic power unit motor: 100 HP. ● Three inline axial piston pumps. ● Main press cylinder: 14"; diameter, 300 tonnes, 24,300 PSI specific pressure. ● Hopper opening: 23 ½"; x 39";.Includes: (1) ARPAC Package Sealer - seal bar sealer and heat tunnel; (1) 40 ft section of powered conveyor; (1) 40 ft section of roller conveyor; (1) ORION pallet wrapper; (1) 5000# floor scale; sawdust receiving bin with chain feed; 12' U-trough auger; 5’ x 5’ precision chip screen; 50 HP MEADOWS Model 35 Hammermill; 22' tube auger; screw bottom-feeding bin; (2) 6" augers feeding presses; Air Compressor in production area.Included but not currently installed: Live bottom Silo and accessories; 15' Cyclone for silo; 6' Cyclone and stand; large material receiving bin, screw bottom. 24" dia. x 20' long screw auger; 35' heavy-duty shiftless auger; Spare Parts- belts, motors, drives, bearings, special tools for equipment, spare parts
SCHUTTE PULVERIZER COMPANY - Model 40 HZF, ...HammermillComplete with the following major components & features: -- Integrated 18", 4,000 CFM Blower. -- WEBSTER Horizontal Feeder. -- Control Panel. -- Main drive motor: 75 HP - 3,540 RPM; originally 220V but switched to 460 Volt. -- Hammer width approx. 1-1/4" wide. -- 3-1/4" Shaft. -- 24" Dia. Rotor and a tip speed of 22,600. -- 17-1/2" Rotor width. -- 3/4" Main chamber steel.MANUFACTURER'S STATED KEY FEATURES:● Heavy-Duty plate construction with replaceable liner plates. ● Heavy-Duty grates available in a variety of sizes. ● Heavy-Duty rotor assembly. ● 24" dia. x 3" thick flywheel. ● Built-in fan conveys material up to 50' vertically and 100' horizontally.● Reversible anvil. ● 2-Way reversible "raked" hammers pull wood in without feed rolls. NOTES: ● Dates to early 1990s. ● The" HZF Series" Horizontal Trim Scrap Grinder is a high-speed, high production Grinder designed specifically for processing longer lengths of wood scrap such as: Rippings, edging, and trim blocks. Available in (4) standard sizes from 10" to 36" wide.● Each model features a built-in fan driven off of the main mill shaft, saving energy and valuable floor space while also significantly increasing production.
SCHUTTE PULVERIZER COMPANY - Model 40 HZF, ...HammermillComplete with the following major components & features: -- Integrated 18", 4,000 CFM Blower. -- WEBSTER 16 Ft. Horizontal Vibrating Conveyor. -- Motor Controls. -- Main drive motor, 75 HP - 3,540 RPM. -- Hammer width is approximately 1-1/4 in. wide. -- 3-1/4" Shaft. -- 24" Dia. Rotor and a tip speed of 22,600. -- 17-1/2" Rotor width. -- 3/4" Main chamber steel. -- Factory Frame.MANUFACTURER'S STATED KEY FEATURES:● Heavy-Duty plate construction with replaceable liner plates. ● Heavy-Duty grates available in a variety of sizes. ● Heavy-Duty rotor assembly. ● 24" Dia. x 3" thick flywheel. ● Built-in fan conveys material up to 50' vertically and 100' horizontally.● Reversible anvil. ● 2-Way reversible "raked" hammers pull wood in without feed rolls. NOTES: ● The HZF Series Horizontal Trim Scrap Grinder is a high-speed, high production Grinder designed specifically for processing longer lengths of wood scrap such as rippings, edging, and trim blocks.● Available in (4) standard sizes from 10" to 36" wide.
Call for Price
SCHUTTE 280.100 HAMMERMILL -- Type 13100P -- Rotor 24" dia. x 48" wide -- Housing 3/4" thick -- Shaft speed 3,600 rpm -- Heavy duty, statically and dynamically balanced rotor -- (96) Standard notched heat treated hammers 3/8" thick -- Also included; two screens -- Motor 125 HP -- Applications; Planer shavings, dry wood chips, etc. etc.
Call for Price
SCHUTTE-BUFFALO 15 Series, Model 15300 Wood Grinder;Complete with the following components and features: --Carbon Steel Construction. --Rotor approximate 44" diameter x 72" wide. --Approximately 3" wide Swinging Hammers, tip speed 20,700. --Top feed, bottom discharge. --Bottom screen approximate 5040 square inch area. --Clam shell housing. --500 HP, TEFC, 3/60/460 volt, 1785 RPM drive Motor with coupling and shaft guard. --Mounted on a heavy-duty steel Factory Frame. --NOTES: Largest model of the 15 Series. ● Machine weight 16,000 Lbs.