EX-FACTORY INC.
EX-FACTORY INC.
 704-841-2001

Backed with a massive machinery database considered to be “the blue book” of woodworking machinery), EX-FACTORY Auctions provides a complete assessment of your equipment and allows you to interact with the market real-time in our dynamic Online Auction!

Filtering

Reset All 

thru
 Used     New
Viewing Page 4 of 11
217 Results Found
Sort By 
EX-FACTORY-INC
 704-841-2001
General Electric 9T 23B3874  Electrical
$3,250

GENERAL ELECTRIC - 9T, ...3-Phase TransformerSpecifications: -- 208 Volt secondary to 480 Volt primary; 45 KVA @ 150° C rise; 120 V neutral line; 60 Hz - 3 Ph; Type 2 enclosure. -- Includes: -- Fused disconnect.

 704-841-2001

 Call
2012 General Kinematics STM 96 X 20  Screening System
$59,500

GENERAL KINEMATICS Para-Mount II Single Deck Rectangular Vibratory Screener;Complete with the following features: --Model STM 96 X 20. --Carbon Steel. --Nominal screen size 96" wide x 20 long x 15" deep. --Designed for Trona mineral at a feed rate of 700 tons per hour at 80 pounds per cubic foot bulk density. --Driven by (2) 15 HP top mounted drives. --Current screen: Approximate 1" x 1" square openings. --Base mounted. --Overall dimensions: 290"L X 130"W X 90"H

 704-841-2001

 Call
2024 Genox V800  Hogs and Wood Grinders
Call for Price

GENOX V800 New Single Shaft ShredderIn Stock - Ready to Ship!Features: -- Shock Absorbing Gearbox that reduces stress on Drive Components -- 50 HP motor -- Hopper Opening - 59" x 56" -- Rotor Diameter - 15.75" -- Rotor Knives that can be used on four edges before replacement. -- Durable Counter Knives that adjust to maintain cutter clearance -- Quick Change Screens for accurate particle size control -- Segmented Shredding Chamber Floor with Brass Guides -- Twin Speed Hydraulics with an integrated air cooler -- Stand Alone Electrical Control Panel with Siemens PLC Control System -- Tested, Approved and Certified to the applicable CE safety standardsTypical Applications --Plastics --Wood --Cable --Paper --Aluminum --Foam --Textile

 704-841-2001

 Call
2024 Genox V600  Hogs and Wood Grinders
Call for Price

GENOX V600 New Single Shaft ShredderIn Stock - Ready to Ship!Features --Shock Absorbing Gearbox that reduces stress on Drive Components -- 25HP -- Hopper Opening - 48" x 43" -- Rotor Diameter - 9" --Rotor Knives that can be used on four edges before replacement. --Durable Counter Knives that adjust to maintain cutter clearance --Quick Change Screens for accurate particle size control --Segmented Shredding Chamber Floor with Brass Guides --Twin Speed Hydraulics with an integrated air cooler --Stand Alone Electrical Control Panel with Siemens PLC Control System --Tested, Approved and Certified to the applicable CE safety standardsTypical Applications --Plastics --Wood --Cable --Paper --Aluminum --Foam --Textile

 704-841-2001

 Call
2021 Gensco DTX 340  Hogs and Wood Grinders
Call for Price

DTX 340 - 14" BLADES" Alligator Shear Description -- DTX 340 --Blade Length: 14"; (340 mm) blades --4-sided reversible & regrindable --Lower blade in adjustable knife seat --Adjustable mechanical guard & adjustable jaw opening --Supplied with guard over cutting head --Foot pedal control

 704-841-2001

 Call
Gensco DTX 680  Hogs and Wood Grinders
Call for Price

DTX 680 - 24" BLADES" Alligator Shear --Description -- DTX 680 --Blade Length: 680mm --Cutting Force: 80 tons --Motor: 3 phase 220 V

 704-841-2001

 Call
2024 Global SITTLER  Bagging System
Call for Price

GLOBAL BAGGER SYSTEMSpecifications: -- Support Structure 2" Tubular Steel -- Height 86 Inches -- Length 12 Feet -- Width top 60" and 90" Base -- Total Weight 1900 Lbs approx. -- Hopper Width 60" -- Hopper Length 106" -- Hopper Depth 44 " -- Capacity 3 Cu.Yards -- Hopper Conveyor Length 146 " -- Hopper Conveyor Width 25" -- Rubber Conveyor Belt 18" Wide -- Bag Clamp Air Operated -- Heat Sealer 24" capacity -- Bagging Capacity up to (200) Bags per HourOptions available, but not included; -- Weight Measure Scale -- Air Compressor -- Bag Stitching Machine -- One Year Warranty -- Loaded on your Truck

 704-841-2001

 Call
Granutech-Saturn 80  Hogs and Wood Grinders
Call for Price

GRANUTECH-SATURN - GRIZZLY 80, ...Grinder Granulator Specifications: -- Rotor size: 77-1/2" -- Cutting diameter: 34-1/2" -- Main motor: 300 HP -- Speed: 321 RPM -- Number of knives: 50 -- Number of stationary knives: 10 -- Rotor type: STAREquipped with: -- Vibratory discharge conveyor -- Outfeed conveyor -- Crossbelt magnet -- Aspiration system -- Replaceable AR500 housing liners -- 3,500 sq/in. screening area -- Severe duty gearboxNOTE: New bed & fly knives on the machine, and new wear liners &new screens. Control panel will be completely rebuilt with a 500 Amp disconnect, a soft start and all the controls.

 704-841-2001

 Call
Granutech-Saturn 62 X 40HT  Hogs and Wood Grinders
$145,000

GRANUTECH-SATURN - 62-40, ...Dual Shaft ShredderSpecifications: -- Motors: (2) 100 HP. -- Feed Opening: 62" x 40". -- Dual Shaft with independent Driven Shafts -- Includes: Feed conveyor & discharge conveyor, extra feed hopper; an extra pulley roller that is magnetized for exit end of discharge conveyor (current pulley roller in use is nonmagnetic). -- includes: (2) Service manuals and catwalk structure.

 704-841-2001

 Call
1994 Granutech-Saturn BIG MAC  Hogs and Wood Grinders
Call for Price

GRANUTECH-SATURN - BIG MAC, ...Used Car CrusherSpecifications: -- Widely recognized as the industry standard, "Big MAC" flatteners combine high performance and low maintenance characteristics in a mobile auto crusher. The result is an unparalleled record for equipment performance: more than 90% of all "Big MAC" flatteners ever made are still at work, with machines built in the 70’s still in operation today. -- Featuring Heavy-Duty “quick-set-up"; hydraulic cylinders that can be quickly and easily raised for operation or lowered for travel, the "Big MAC" flattener meets the needs of today's mobile scrap processor. Offering a wide, opening for easier loading and larger capacities, the "Big MAC" is built to perform. Multiple automobiles can be easily compacted into dense bundles, reducing both onsite storage demands and transportation costs.Key features and benefits include: -- Quick setup design -- Air Compressor -- Waste oil collection tanks -- 6-Cylinder Tier III engine -- 6" Cylinder rods -- Hydraulic landing gear -- Heavy-Duty push bumper

 704-841-2001

 Call
Granutech-Saturn 62 X 40HT  Hogs and Wood Grinders
Call for Price

GRANUTECH-SATURN - 62-40, ...Dual Shaft ShredderSpecifications: -- Motors: (2) 100 HP.Model: 62-40 HTFeed Opening: 55″ x 38″Outside Dimensions: 130″ x 61″ X 43″Power Unit Dimensions: 96″ x 86″ x 96″ Weight is 20,000 Lbs.Cutter Diameter: 20.5″ at HooksPower Unit Open Loop, Skid MountedElectrical Power 200 HP (2 x 100) Hydraulic Flow 156 GPM; Rated Pressure 3000 PSIOperator initiated pushbutton controls,featuring Allen Bradley PLC Motor controls include primary disconnectwith short circuit protection, full load contactors, and electronic overload detectionControl power is derived from a single-phase transformer.All components are assembled and wired in a NEMA enclosure Heavy Duty Discharge Conveyor and mezzanine Stand

 704-841-2001

 Call
Granutech-Saturn BIG MAC  Hogs and Wood Grinders
Call for Price

GRANUTECH-SATURN - BIG MAC, ...Used Car CrusherNew in 2004 16,000 hours, serviced every 250 hours since new, new hydraulic pump Oct 23, all cylinders were freshly rebuilt after taking out of service, new recapped tires, all lights work, road ready.Specifications: -- Widely recognized as the industry standard, "Big MAC" flatteners combine high performance and low maintenance characteristics in a mobile auto crusher. The result is an unparalleled record for equipment performance: more than 90% of all "Big MAC" flatteners ever made are still at work, with machines built in the 70’s still in operation today. -- Featuring Heavy-Duty “quick-set-up"; hydraulic cylinders that can be quickly and easily raised for operation or lowered for travel, the "Big MAC" flattener meets the needs of today's mobile scrap processor. Offering a wide, opening for easier loading and larger capacities, the "Big MAC" is built to perform. Multiple automobiles can be easily compacted into dense bundles, reducing both onsite storage demands and transportation costs.Key features and benefits include: -- Quick setup design -- Air Compressor -- Waste oil collection tanks -- 6-Cylinder Tier III engine -- 6" Cylinder rods -- Hydraulic landing gear -- Heavy-Duty push bumper

 704-841-2001

 Call
GS Hevi-Duty 34 KVA  Electrical
$945

GS - HEAVY-DUTY 34 KVA, ...Transformer.SCR Drive Transformer. -- Cat # DT631H34S. -- High voltage 575 Volts Delta; Low voltage 230 Y/133.

 704-841-2001

 Call
2012 Guidetti WIRE 415  Hogs and Wood Grinders
$85,000

GUIDETTI - WIRE 415, ...Copper & Wire Chopper with Pre-Shredder -- Currently Disassembled.Specifications: -- Feed size of material; 1,310 x 2,140 mm. -- Load pusher stroke: 600 mm. -- Rotor diameter: 220 mm. -- Rotor rotation speed: 82 RPM. -- Hydraulic power: 0.75 kW. -- Grid hole diameter: 40 mm. -- Rotating blades: 23 + 4 External. -- Low hours; 2,300 Hrs.GUIDETTI Pre-Shredder New in 2012. -- Model: PM6N 600/200 -- Low hours: 1,700 -- Loaded onto your truck.

 704-841-2001

 Call
2018 Haas 2000XL  Hogs and Wood Grinders
Call for Price

HAAS - 2000XL 2.0, ...Mobile ShredderLow Hours; 2018 YMFG.Specifications & Features: -- Can be used at any location (comfortable transport measurements). -- Easy & quick positioning thanks to crawler track and radio remote control. -- Shreds different materials with just (1) tool configuration. -- High throughput capacity of up to 100 tons/Hr. -- Resistant against foreign bodies. -- Low wear cost and long lifetime. -- Service and maintenance friendly. -- No wrappings; self-cleaning. -- Quiet main drive.

 704-841-2001

 Call
1999 Hurst Boiler 600 HP  Boiler
$550,000

HURST 600 HP Waste Fired Boiler; -- Specifications:Complete in-place system with the following features: -- Decommissioned July 2019. -- 150 PSI. (300 PSI max wp), -- 20,700 Lbs per hour. -- Fuel House, Boiler Building and all Controls -- System has been "pickled" to maintain tube integrity.

 704-841-2001

 Call
2014 Hustler FC-2  Hogs and Wood Grinders
$46,500

HUSTLER - FC-2, ...ScreenSpecifications: -- OD at the longest point: 104" -- Long at longest point: 122" -- Tall at the tallest point: 65"Equipped with: -- (2) Shutoff switches

 704-841-2001

 Call
Jackson Lumber Harvester 30D6  Shavings Mill
Call for Price

(1) SET OF JACKSON SHAVING MILLS;COMPRISED OF: -- (1) Jackson Model 30D6 Shaving Mill -- (1) Jackson Model 30D10 Shaving Mill -- Chain Drive 4-1/2 Feet Boxes -- (1) Custom Built 2- Head shaver -- Shaving Discharge Belt Conveyor Under Each Shavers. -- Log Deck -- Log trough conveyor. -- Screen -- Loaded on Truck or Container.

 704-841-2001

 Call
Jackson Lumber Harvester 30D10HLC  36D10HLC  Shavings Mill
Call for Price

(3) JACKSON SHAVING MILLS;Complete with the following major components and features: -- (2) JACKSON Model 30D10HLC Shaving Mills with 75 HP on the Shaver Heads. -- (1) Jackson Model 36D10HLC Shaving Mill with 100 HP on Shaver Heads and 25 HP Hydraulic Unit. -- 8 Ft. Log Boxes. -- Shaving Discharge Belt Conveyor under each Shaver. -- Loaded onto your Truck.NOTES: &#9679 Available to purchase as one, two or all three units. &#9679 See video on this listing.

 704-841-2001

 Call
2014 JBF HD 38/50  Hogs and Wood Grinders
$23,500

JBF - HD 38/50, ...Hard Disk Drive ShredderSpecifications: --Shredding blades: 1". -- Cutting zone: 14" x 20". -- Hopper opening: 54" x 30". -- Waste bin volume: 240 Ltr. -- Motor power: 4,000 Watt.

 704-841-2001

 Call
Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved