704-841-2001
Backed with a massive machinery database considered to be “the blue book” of woodworking machinery), EX-FACTORY Auctions provides a complete assessment of your equipment and allows you to interact with the market real-time in our dynamic Online Auction!
Industry
Woodworking
Category
Mortisers
7 Results Found
704-841-2001
$3,250
BACCI - MOA, ...Single Table Mortiser.Mortises or bores holes on chairs, furniture or case goods. -- Single table and spindle. -- 3 HP - 9,500 RPM Motor with (200) oscillations/Min.Features: -- 9" x 19" Table tilting +/- 20° (side-to-side). -- (1) Adjustable overhead pneumatic holddown. -- 3" Max. slot depth, 4-3/8" max. slot length, 1-15/16" max. dia. tooling.
$4,260
BACCI MOA Single Table MortiserMortises or bores holes on chairs, furniture or case goods. -- Single table and spindle, -- 3 HP - 9,500 RPM motor with (200) oscillations/Min. Features: -- 9" x 19" Table tilting +/- 20° (side-to-side), -- (1) adjustable overhead pneumatic holddown. -- 3" Max. slot depth, 4-3/8" max. slot length, 1-15/16" max. dia. tooling.
BALESTRINI 2 CAP Mortiser --Automatically mortises or bores round holes in chairs or case good --Specifications -- Twin tables with pneumatic holddown clamps, (1) on each side eliminating dead cycle time, 19" long tables tilt left or right 0ø to 20ø. --Equipped with & Features -- 3 HP - 9,000 RPM Spindle motor and 1 HP oscillation motor. -- Spindles are mounted on prismatic guides with adjustable bronze gibs and move by rack & pinion, -- (120) to (240) oscillations/Min; 4-23/32" max. oscillation length, -- 3-1/8" max. depth, 7/8" max. bit dia., 13 mm spindle collet dia.
$10,500
2-Machine System consisting of BALESTRINI "PICO" Round End Tenoner & BALESTRINI "MICRON" Slot Mortiser. -- "PICO" Round End Tenoner: Left & right "twin" tilting tables (one table is always in the cutting position); 14" x 9" tables tilt 0ø - 20ø, both table fences with pin stops for indexing stile and rail doors. -- Fences swivel up to 45ø, each table with vertical pneumatic holddown; 4 HP cutter block motor, 1 HP cutter block rotation motor, 9,000 RPM spindle speed. -- Capacity: 3-15/16" (100 mm) Max. tenon length, 1-3/16" (30 mm) max. thickness, and 1-31/32" (50 mm) max. depth. - Hourly production rate of (600 - 700) tenons. -- "MICRON" Slot Mortiser: Dual spindle system, (1) each side with tables and overhead holddown, 3 HP - 9,000 RPM spindles, (60 - 350) oscillations/Min, 18 mm collet dia. -- Capacity: 4-23/32" (120 mm) Max. length of slot, 3-1/8" (80 mm) max. slot depth, 1-3/16" (30 mm) max. slot thickness. - Hourly production rate of (500 - 800) slots. --The PICO has a timing issue and may just need to be adjusted.
$6,800
CANTEK - PCM 120, ...Hollow Chisel MortiserFeatures: -- Power stroke of head permits easy, fast, and accurate successive cuts. -- Separate fan blower to keep work clean and free from dust & chips. -- Manual adjustable table height and lateral position. -- Heavy-Duty cast iron construction. -- Convenient centralized control panel. -- Foot pedal actuated cycle. -- Pneumatic workpiece clamping by lever.Specifications: -- Chisel range: 1/4" - 3/4"; Motor; 2 HP; Spindle speed: 3,400 RPM. -- Table: 16-3/4" x 21-1/4; Table tilts 30°. -- Air pressure: 8kG Clamping; Cylinder: 2-1/2” (63 mm). -- Head traveling cylinder: 3.15” (80 mm); Table cross travel: 5”. -- Table longitudinal travel: 18”; Table vertical travel: 12”. -- Max. stock width: 12”; Max. mortising depth: 4”. -- Machine weight: 572 Lbs. -- Shipping weight: 726 Lbs; Shipping dimension: 35” x 38” x 70” (880 x 960 x 1,780 mm).
$6,940
Large table size, extendable in all three directions by up to 39" (1,000 mm) without the requirement of tools. Comfortable one-handed lever operationHeavy-duty eccentric clamp, usable on the left and right-hand side.Specifications: -- 3 HP motor, tilting head, manual hand lever control for mortise length and depth; 13" x 22" table with eccentric clamp -- 3000 RPM, reversible motor that caters for left and right cutting bits and a solid quad-jaw chuck with clamping range from 0–20 mm -- Lateral range of motion is 250 mm, cut depth is 160 mm, available height adjustment is 130 mm and there are solid locking stops in all three directions for setting precise stops.Features: 2-Jaw chuck with 5/8" capacity, Dust control collection tray below the cutter out to an 80 mm outlet,Complete with (2) adjustable and removable extension wings; fence for 90° & 45° mortises, extended stop bar on each side of table.
$5,200
OLIVER - 91-D, ...Hollow Chisel Mortiser -- Heavy American Made Mortiser; a well functioning Machine with 5 HP motor. -- A great machine for doing all types of mortises and its bulletproof.