MACHINERY INSTALLATION CO., INC. (M.I.C.I.)
 336-269-2284

Filtering

Reset All 

thru
 Used     New
Viewing Page 1 of 3
55 Results Found
Sort By 
MACHINERY-INSTALLATION-CO-INC-(MICI)
 336-269-2284
2019 Jocar MDHM160F  Edgers-Slab
Call for Price

VERTICAL ARBOR SLAB RECOVERY GANGS are designed to process 3 sided slabs into pallet boards. Ten (10) vertical, interior feed rolls are standard. Variable speed feed system up to 175 FPM. 2" automatic cant variance allows both 3 1/2" and 5 1/2" wide cants to be run back to back with no operator involvement or machine adjustments. Machine utilizes one bottom "clean-up" saw to eliminate irregular shaped pieces assuring flat, square pallet boards. 30" to 60" lengths. Can be partnered with a slab edger and trimmer to recover boards with NO operators.

 Burlington, NC
 336-269-2284

 Call
 Alco Machine 30  Debarker
$180,000

ALCO 30" ring debarker. 5 arm. Hydraulic feed system. Operator cab and controls. Never installed after factory reconditioning (have a list of all repairs). New-never installed 23' belt type infeed; 40' belt type outfeed. No belts included. Price $180,000. Exceptionally nice system.

 Burlington, NC
 336-269-2284

 Call
2005 Brewco B-1600  Resaw-Band
$105,000

Complete BREWCO B-1600 Resaw with run around system. Can be seen operating until November 2019. Will saw lengths 6' to 16' and up to 16" x 16" cant size. System has run everyday and is in good working condition.

 Burlington, NC
 336-269-2284

 Call
 Bruning-Federle 40 x 14  Blowers and Fans
$1,500

Bruning & Federle 40" material handling fan with common base for electric motor (motor not included). Base is approximately 64" x 60" x 22" tall. Fan has 6 blades mounted on 2 7/16" shaft and face is 12". Nice belt guard is included. Fan is in good condition with no holes. Inlet is 16" round and outlet is 16" x 14".

 Burlington, NC
 336-269-2284

 Call
 Cleereman Industries LP 42  Carriage (Sawmill)
$75,000

CLEEREMAN 42" linear positioning hydraulic carriage. 42" opening, 4 headblock, 8" tubular frame, 14" wheels, 20 HP hydraulic power unit, complete with track and SILVATECH setworks. $ 75,000 OBO. FOB MILL SITE.

 Burlington, NC
 336-269-2284

 Call
2018 Cooper Machine   Trimmer
Call for Price

Unused. Cooper drop saw trimmer to trim 6' to 12' lengths.

 Burlington, NC
 336-269-2284

 Call
2018 Cooper Machine   Conveyor
Call for Price

New-unused. 17' long; vulcanized 24" belt width; 5 HP drive; 7" deep sides; 42" to top of belt from ground; 26" inside width; lagged head pulley. Extremely nice.

 Burlington, NC
 336-269-2284

 Call
2018 Cooper Machine   Conveyor
Call for Price

NEW COOPER wide roller conveyor with jump chain transfer. 40' overall length (18'6" length and 21'6" length). 7.5 HP electric drive; Rolls have 60" wide face and mounted on 1 15/16" shafts and bearings; 18 total rolls. 18'6" end section includes: air operated stop gate; a 4 strand transfer with 81X chain and a 2HP electric drive and transfer measures 8'6" overall length.

 Burlington, NC
 336-269-2284

 Call
 Corley   Edgers-Gang
$190,000

Complete Mill to include: MELLOT debarker; HMC carriage, AC40, 3 headblock; 60 HP DC carriage feed; CORLEY 8" x 60" split combination gang edger; MORBARK 58" chip pack with 150 HP motor; trimmer and unscrambler; live roller conveyor with transfer; sorting and collecting chains; air compressor; log decks; waste system for sawdust; knife grinder; all electric motors and starters. Installed and must be removed. $190,000.

 Burlington, NC
 336-269-2284

 Call
 Corley   Trimmer
$15,000

CORLEY drop saw trimmer. Right Hand. Will trim from 6' to 20'. 10 HP motors on each saw. Includes block belt and guards. $15,000.

 Burlington, NC
 336-269-2284

 Call
 Corley 8 X 48  Edgers-Gang
Call for Price

CORLEY 8" X 48" Gang only. Weather worn but in very good condition. 200 HP main motor and 3 HP feed drive. Coleman teeth are in excellent condition. Ran very little. NO infeed or outfeed.

 Burlington, NC
 336-269-2284

 Call
 Crosby   Trimmer
$9,000

Two (2) saw timber trimmer. NO setworks.  As is where is $9,000.00.

 Burlington, NC
 336-269-2284

 Call
 Custom   Log Merchandising System
Call for Price

Includes operator's cab with controls, cutoff saw, 75' main log conveyor, 18' log conveyor with kicker system, 10' log conveyor with clamp which shifts, catwalk and ladders, C132 chain, and sub-steel.

 Burlington, NC
 336-269-2284

 Call
2002 Custom LOG CUT UP SYSTEM  Log Merchandising System
Call for Price

LOG CUT UP SYSTEM WITH SORTING: Includes infeed, 7 strand log deck; log conveyor to 72" cut off saw; log stops; 12 bays of sorting pockets by HUOT of Canada.

 Burlington, NC
 336-269-2284

 Call
1997 Frick   Circular Sawmill
$60,000

Good cond. Complete w/4hblk, 01 carriage; husk w/213 Berry feed & Mellott(M) off-bearer, 2 blades, 200HP mtr & drive; 15HP comp; Meadows edger; (M)636 debarker w/ Patz & 2 (M)log decks; (M)log turner; 58" Mor. chipper w/200HP motor; 20' slab belt & (M)live rolls. Starters incl. NO setworks. 2b removed.

 Burlington, NC
 336-269-2284

 Call
 Fulghum 60  Wood Chipper - Stationary
$15,000

FULGHUM 60" Chipper. HFVD. 6 knife. Includes: 125 HP motor and starter; blowpipe to load trailers; v-belt drive and guard; 20' WEBSTER vibrating conveyor. $15,000.

 Burlington, NC
 336-269-2284

 Call
 Fulghum 48  Wood Chipper - Stationary
$8,000

FULGHUM 48" chipper. HFVD. 6 knife. Includes: old style 75 HP motor and v-belt drive; blowpipe to load trailers; 15' WEBSTER vibrating conveyor. $8,000.

 Burlington, NC
 336-269-2284

 Call
 HE Wilson 4 Strand  Unscrambler
$7,500

WILSON Unscrambler. 4 strands of 78 chain with flights. Deep "V" pocket. 5 HP electric drive. Approximately 5' tall at discharge, 10' outside to outside, and 8' front to back. $7,500.

 Burlington, NC
 336-269-2284

 Call
 Hemco   Conveyor
$5,500

(2) collecting chains, approximately 25' each, 5 strands, H78 chain on three of the 5 chains, elevated from 4' minimum height to 8' maximum, heavy duty reversing drives included with each.  $5,500 each.

 Burlington, NC
 336-269-2284

 Call
 Hemco   Lumber Stacker
$35,000

HEMCO Model SB150 stacker system is complete with: 20' package deck; 6' breakdown deck; 6 strand unscrambler; 4 arm stacker with 4 strands of chain; hydraulic cylinder let down hoist with rolls x 20'; 40' of outfeed rolls; stick placement platform; 20' two strand stick deck; hydraulic power unit; air compressor.  All controls and hydraulic even-ender still attached to stacker. In very good condition.  Removed from service and ready to load. $35,000.

 Burlington, NC
 336-269-2284

 Call
Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2019 LumbermenOnline.com - All Rights Reserved