931-797-6284
It is our goal at Kittrell Sawmill Brokers and Appraisers to bring the Forest Products Industry services with high standards of integrity; assisting them with an easy convenient way to stay connected to machinery for sale, to offer a means to sell machinery at private sale and at auction and offer appraisal services that will allow companies to remain diversified and competitive in today’s global wood products market.
67 Results Found
931-797-6284
$61,250
2011 John Deere 848H Grapple Skidder, 50% Tires, Great Condition, Ref# 138, Call Rachel 931-797-6284 for more information
$55,000
2003 John Deere 748G II, (1) owner skidder, 10’ grapple w/ winch, 10,000+/- hours, good maintenance on pins & bushings, S/N DW748GX597580, about 50% on tires, tire size 30.5 x 16.5 (ref # 117) - Call Rachel 931-797-6284
$65,000
2007 John Deere 748H grapple skidder, 12’ wide opening, 250 hours on new JD Factory engine, joystick controller, Excellent Condition, 1st Crank Machine! S/N 1DW748HXC9D633075, heat, air & radio, at least 50% on tires, 30.5 tires x 16.6 (ref #117) – Call Amy (928)723-9449
$70,000
REDUCED! 2007 Mellott 48 LMR Rosserhead Debarker, full electric over hydraulic w/ fully enclosed cab, A/C, joystick controls, All Electric (no air), Includes all electrical, Owner has put tons of new parts, was used as a backup (very little use),Ready to plug in and roll, Call Rachel for more information 931-797-6284 (ref #172) Note: $300,000 new, Mellott says waiting list for new machine is 1 year.
$899,999
Lumber Breakdown, Dual Grading, Trim, Sort, and Stack System – 45’ (4) strand package deck w/ S-drive & H-78 chain, 6’ (4) arm breakdown hoist (hydraulic w/ HPU) w/ stick removal belt & stick stacker, dual grading stations as follows: (1) top (5) strand common shaft dual drive & (1) bottom w/ (5) strand decline table 20’ grading w/ operator control w/ 81X chain, both w/ operator control w/ 81X chain, Softac software & PLC VASKAWA57 VFD, Lucidyne label jet printer, MIC lumber trimmer w/ double paddle fence, MIC (28) bay bin sorter, (5) arm blade type lumber stacker & Sullivan Palatek air compressor (piston),Loaded on your truck, all controls are in order ,this system was running December 1, 2023, ref #171 – For More Details Call for Complete Component System
$899,999
Lumber Breakdown, Dual Grading, Trim, Sort, and Stack System – 45’ (4) strand package deck w/ S-drive & H-78 chain, 6’ (4) arm breakdown hoist (hydraulic w/ HPU) w/ stick removal belt & stick stacker, dual grading stations as follows: (1) top (5) strand common shaft dual drive & (1) bottom w/ (5) strand decline table 20’ grading w/ operator control w/ 81X chain, both w/ operator control w/ 81X chain, Softac software & PLC VASKAWA57 VFD, Lucidyne label jet printer, MIC lumber trimmer w/ double paddle fence, MIC (28) bay bin sorter, (5) arm blade type lumber stacker & Sullivan Palatek air compressor (piston), loaded on your truck, All controls are in order, This system was running the first of December 2023, ref #171 – For More Details Call for Complete Component System you can run it now.
$899,999
Lumber Breakdown, Dual Grading, Trim, Sort, and Stack System – 45’ (4) strand package deck w/ S-drive & H-78 chain, 6’ (4) arm breakdown hoist (hydraulic w/ HPU) w/ stick removal belt & stick stacker, dual grading stations as follows: (1) top (5) strand common shaft dual drive & (1) bottom w/ (5) strand decline table 20’ grading w/ operator control w/ 81X chain, both w/ operator control w/ 81X chain, Softac software & PLC VASKAWA57 VFD, Lucidyne label jet printer, MIC lumber trimmer w/ double paddle fence, MIC (28) bay bin sorter, (5) arm blade type lumber stacker & Sullivan Palatek air compressor (piston), loaded on your truck, All controls are in order so no BS about its going to cost $100k for controls, This system was running the first of December 2023, ref #171 – For More Details Call for Complete Component System
Uses Precision Parts Morbark 58", 3-knife chipper w/ 5' x 5' Precision shaker screen, cyclone and chip blower w/ dual loadout chute, price is loaded on buyer's truck, (ref #0) Amy Cross 928-723-9449
$3,500
Heavy Duty Newman KM-1 Single Head Notcher w/ motor & starter box, w/ indexing head that will notch to unlimited length (3 ph, air cylinder needs rebuilt), Ref #155 Call Rachel 931-797-6284
$12,500
Powell Scale Model 660/c10W 10, 60’ x 10’, Concrete Platform Scale, Load Cells Mint Condition, 60 Ton, S/N 0593-87 Perfect for Log trucks with 42-45 foot trailer or dump truck Loads. (ref# 93)
$3,000
Nice powerful bandsaw with extended table still running so you can run it yourself "try before you buy". (2) available for sale. Seller is motivated so if you need this saw let's talk. Call Amy. 928-723-9449 931-797-6284.
$68,750
Precision P748H rosserhead debarker, 32’, 3 7/16" shaft, S/N D-577, debarker will debark logs up to 30’, includes (6) strand infeed deck w/ hydraulic motor/drive, includes Precision 65'barn sweep w/ incline, (ref #181) Call Rachel for more information 931-797-6284
$25,500
1998 Prentice 410D knuckleboom loader, Serial number NSB04104954927, 100 hours on completely rebuilt Cummins engine, 50 hours on new hour meter (total machine hours unknown), Completely rebuilt continuous rotation grapple, Joystick controls, Bucksaw hookups, new tires, working brakes, Bushings and bearings are tight and runs good, Ref #183, Call Rachel for details 931-797-6284
$85,000
REDUCED - Reckart Machine Super band resaw system, 50 HP, 12" x 16" opening w/ motor control mounted, 41" wheels, saw guides, hydraulic feed, air setworks w/ air reserve tank, 18" wide roll case (heavy duty), 12' wide transfer decks (4) 81X chain w/ hook stop, hydraulic drives, infeed roll case 18" w/ (4) arm roller chain position wear plates w/ hydraulic power pack, 10" x 18" rolls on roll case, dust conveyor, paint is not even off wear plates (GEM in the dust!!) (Ref #154) Call Logan 304-641-6640 - surge deck available for an additional $5,000
Rockland Grapple Forks with Log Grapple Model LFW 644J, S/N R 34297, compatible with Cat IT38, 950 CAT, Volvo 110, and JD 644 (just to name a few) Ref# 178, Call Amy 928-723-9449, Ref #178, Call Amy 928-723-9449
Schutte horizontal hog, replaced shaft w/ blower & motor, heavy duty design (ref #162) Call Amy for more information (928) 723-9449
$3,500
approx. 40' long Steel box conveyor w/ 12" wide ladderback chain, (chain is stiff but can be moved just needs some lube and flexing) heavy duty drive system, includes 5 HP motor that was working when removed but can't check because it is no longer wired w/ maintenance platform (ref # 162) Call Amy for more information (928) 723-9449
$2,500
$2,000
$11,000
16' x 17' x 32' overhead chip bin, includes cyclone on top of bin and HPU (buyer is responsible for all rigging and proof of insurance is required) (main 150 HP collector fan and 20 HP transfer fan available for additional $10k (ref #173)