931-797-6284
It is our goal at Kittrell Sawmill Brokers and Appraisers to bring the Forest Products Industry services with high standards of integrity; assisting them with an easy convenient way to stay connected to machinery for sale, to offer a means to sell machinery at private sale and at auction and offer appraisal services that will allow companies to remain diversified and competitive in today’s global wood products market.
61 Results Found
931-797-6284
$61,250
2011 John Deere 848H Grapple Skidder, 50% Tires, Great Condition, Ref# 138, Call Rachel 931-797-6284 for more information
$27,500
TC54 John Deere Loader with 4' JRB Quick Couple Forks. (sn: DWTC54H570468) 26,344 hours. Well Maintained. Contact Zach: 931-224-0699
$899,999
Lumber Breakdown, Dual Grading, Trim, Sort, and Stack System – 45’ (4) strand package deck w/ S-drive & H-78 chain, 6’ (4) arm breakdown hoist (hydraulic w/ HPU) w/ stick removal belt & stick stacker, dual grading stations as follows: (1) top (5) strand common shaft dual drive & (1) bottom w/ (5) strand decline table 20’ grading w/ operator control w/ 81X chain, both w/ operator control w/ 81X chain, Softac software & PLC VASKAWA57 VFD, Lucidyne label jet printer, MIC lumber trimmer w/ double paddle fence, MIC (28) bay bin sorter, (5) arm blade type lumber stacker & Sullivan Palatek air compressor (piston),Loaded on your truck, all controls are in order ,this system was running December 1, 2023, ref #171 – For More Details Call for Complete Component System
$899,999
Lumber Breakdown, Dual Grading, Trim, Sort, and Stack System – 45’ (4) strand package deck w/ S-drive & H-78 chain, 6’ (4) arm breakdown hoist (hydraulic w/ HPU) w/ stick removal belt & stick stacker, dual grading stations as follows: (1) top (5) strand common shaft dual drive & (1) bottom w/ (5) strand decline table 20’ grading w/ operator control w/ 81X chain, both w/ operator control w/ 81X chain, Softac software & PLC VASKAWA57 VFD, Lucidyne label jet printer, MIC lumber trimmer w/ double paddle fence, MIC (28) bay bin sorter, (5) arm blade type lumber stacker & Sullivan Palatek air compressor (piston), loaded on your truck, All controls are in order, This system was running the first of December 2023, ref #171 – For More Details Call for Complete Component System you can run it now.
Uses Precision Parts Morbark 58", 3-knife chipper w/ 5' x 5' Precision shaker screen, cyclone and chip blower w/ dual loadout chute, price is loaded on buyer's truck, (ref #0) Amy Cross 928-723-9449
$3,500
Heavy Duty Newman KM-1 Single Head Notcher w/ motor & starter box, w/ indexing head that will notch to unlimited length (3 ph, air cylinder needs rebuilt), Ref #155 Call Rachel 931-797-6284
$10,500
Newman KNO 24 lumber trimmer, (9) station drop saw, will pass rail tie’s, includes waste conveyor & infeed (available at end of June 2024) Ref #188
Call for Price
Northtech horizontal band resaw, (2) blades, will cut up to a 12 x 12" cant, powered by (2) 20 HP 460 Volt 3 Phase motors, runs (2) 1 1/4" band blades, Excellent Condition, (new condition with less than 4 hours use). Owner is retiring. Contact Amy (928) 723-9449
$12,500
Powell Scale Model 660/c10W 10, 60’ x 10’, Concrete Platform Scale, Load Cells Mint Condition, 60 Ton, S/N 0593-87 Perfect for Log trucks with 42-45 foot trailer or dump truck Loads. (ref# 93)
$68,750
Precision P748H rosserhead debarker, 32’, 3 7/16" shaft, S/N D-577, debarker will debark logs up to 30’, includes (6) strand infeed deck w/ hydraulic motor/drive, includes Precision 65'barn sweep w/ incline, (ref #181) Call Rachel for more information 931-797-6284
$25,500
1998 Prentice 410D knuckleboom loader, Serial number NSB04104954927, 100 hours on completely rebuilt Cummins engine, 50 hours on new hour meter (total machine hours unknown), Completely rebuilt continuous rotation grapple, Joystick controls, Bucksaw hookups, new tires, working brakes, Bushings and bearings are tight and runs good, Ref #183, Call Rachel for details 931-797-6284
$85,000
REDUCED - Reckart Machine Super band resaw system, 50 HP, 12" x 16" opening w/ motor control mounted, 41" wheels, saw guides, hydraulic feed, air setworks w/ air reserve tank, 18" wide roll case (heavy duty), 12' wide transfer decks (4) 81X chain w/ hook stop, hydraulic drives, infeed roll case 18" w/ (4) arm roller chain position wear plates w/ hydraulic power pack, 10" x 18" rolls on roll case, dust conveyor, paint is not even off wear plates (GEM in the dust!!) (Ref #154) Call Logan 304-641-6640 - surge deck available for an additional $5,000
Schutte horizontal hog, replaced shaft w/ blower & motor, heavy duty design (ref #162) Call Amy for more information (928) 723-9449
$3,500
approx. 40' long Steel box conveyor w/ 12" wide ladderback chain, (chain is stiff but can be moved just needs some lube and flexing) heavy duty drive system, includes 5 HP motor that was working when removed but can't check because it is no longer wired w/ maintenance platform (ref # 162) Call Amy for more information (928) 723-9449
$2,500
$2,000
$11,000
16' x 17' x 32' overhead chip bin, includes cyclone on top of bin and HPU (buyer is responsible for all rigging and proof of insurance is required) (main 150 HP collector fan and 20 HP transfer fan available for additional $10k (ref #173)
$29,500
Grade Resaw 16” x 16”, set up very much like a West Plains, Heavy Duty W/ 44” x 5” Band Wheels, Dual Slat Feed Through Conveyor, Top Press Rolls Air, 75 HP Saw Motor, Includes 4’ x 4’ x 7’ Sawyer’s Cab W/ A/C, Complete Run Around System W/ Transfer Conveyors and Return Roll Cases, Includes Motor Control Cabinet W/ Variable Feed Drive, (22) Bands, Note: Seller has contact information for someone who will remove & load on truck, Ref # 187
Wood-Mizer 12' (2) strand custom log deck, Excellent Condition (Rarely Used)... Contact Amy for more information (728)723-9449
$100,000
2005 Wood-Mizer LT300 thin kerf 30 HP horizontal band mill w/ soft start mounted controls, 2,900.5 hours, hydraulic dogs & stop & load, electric carriage w/ (2) new inverter drive motors w/ setworks – electronic & latest generation - 12’ x 5’ (2) strand infeed log deck - 20’ x 24” belt w/ shaft mount electric drive w/ MCC - 6’ x 8’ catch & roll table - Includes spare parts - 25’ (2) strand lumber sorting chain w/ detachable link chain & 7.5 HP drive - 2019 Accucut hydraulic feed edger w/ 30 HP motor, (2) laser line lights, (1) movable saw & moves w/ operator’s wheel steel table infeed & outfeed, 24” wide cutting space, mounted blower and (3) sets of (2) piece split edger blades (ref #145)