Logosol Big Mill - Wide Slabber You can come across really big trees both out in the woods and in older parks and gardens. When the trees are felled, it is often hard to find the right tools for cutting the logs into valuable boards. Oversized logs are easiest to cut up on the spot where they were felled, and the Logosol Big Mill is the ultimate solution. The package consists of a saw frame for big chainsaws and guide rail sections, which give stability and highest precision. New possibilities for giant logs Giant logs are easiest to cut up on the spot where they were felled. The Logosol Big Mill is a complete equipment package that gives you unique opportunities to make use of valuable giant logs. Cut wide, rough-edged boards from different sorts of fine wood. The system with two guide rails gives stability and highest precision. You work quickly and safely in a comfortable working position. After some practice, you will only need a couple of minutes to set the equipment for the next cut. This sawmill can handle log lengths up to 2.7 metres and diameters up to 180 cm. You can exetend the equipment for longer logs. Guide rail package for the Big Mill With the guide rail package for the Big Mill you get highest precision and exact measurements in every saw cut. Very simple adjustments between the saw cuts. Comfortable sawing where you use a crank that gives an even pressure and a very good sawing result. The standard length of the guide rails is 3 metres. From oversized log to unique boards with the Logosol Big Mill Benefits ? Comfortable operation with a crank that gives an even pressure and a very good sawing result. ? Guide bar lengths of up to 84’’ (214 cm) allow for a cutting width of fully 180 cm. Longer guide bars can be specially ordered. ? Safe, efficient and exact sawing. ? Simple setting between the saw cuts. ? 2.7 metre sawing length with the possibility of extension. ? Separate oil pump for lubrication at the bar nose, means minimal wear on the guide bar. ? Water cooling of the chain makes the chain stay sharp longer. ? Two guide rails give stability and accurate measurements. ? Tools for changing chain and templates for exact setting for different board thicknesses are included. Fox Forestry is a family owned forest management company located in Orland, Maine. We specialize in forest management health and aesthetics. Fox Forestry is also the leading Logosol dealer in the US. We sell Logosol products because we use Logosol products. The brands we sell include Japa, Espegard, Husqvarna, Cannon Bar, and Oregon Chain.

Original accessories – more possibilities for your sawmill Increase the capacity and facilitate work. With the right accessories you get a sawmill that suits you and your activities! Round Sawing Attachments Cut up to 16 sides on the logs. Round sawing attachment from Logosol. This sawing attachment allows you to make up to 16 cuts on a log. Compatible with the LM40 and Log House moulder. Comes complete with instructions. Fox Forestry is a family owned forest management company located in Orland, Maine. We specialize in forest management health and aesthetics. Fox Forestry is also the leading Logosol dealer in the US. We sell Logosol products because we use Logosol products. The brands we sell include Japa, Espegard, Husqvarna, Cannon Bar, and Oregon Chain.

This slab surfacer is the same as GSS-70 gas engine powered surfacer, except they are powered by a 30HP 3-phase techtop electric motor available in 460 or 230 volt. Comes standard with start-stop switch to mount on surfacer, 50’ of wire between motor, and soft start mounted in a safety disconnect enclosure. The dust collection kit will increase production of these machines. There is no price difference between 460 & 230 volt. Does not include track or power feed roller chains.

Slab surfacers are designed for planing and sanding any large surfaces such as, but not limited to, table tops, countertops, fireplace mantels, and timbers and are exactly the same except the width. the SS-96 can be used on the 96” ground bed track and planes up to 96” wide surfaces. Both come with 35HP gas Briggs VanGuard engine that powers a direct-drive double hydraulic pump to power the machine. This is a rugged heavy duty machine for the serious woodworker. Comes standard with cutter head and an extra set of carbide inserts and sanding head with 10 pieces of sandpaper. Can also be used on concrete slab track if customer builds their own slab holding and clamping table. The dust collection blower kit will increase the production of these machines. Does not include track or power feed roller chains.

This mill features a 35HP Briggs Vanguard engine. Hydraulic power if for head lift and power feed. 70" wide max cutting capacity with a 26" deep cut throat that can be used for quarter sawing. Also includes 100' of #60 roller chain with connector links and bolts to hook up power feed chains. DOES NOT INCLUDE TRACK. I-Beam groundbed track can be added to purchase at 30' for $10,500, 35' for $12,500, 40' for $14,500. Approximate weight is 4,000 lbs.

This mill is identical to the model GHS-70 except it features a 30HP 3-phase techtop electric motor with a start-stop switch on saw. Includes 50' of wire between motor and a Fuji Frenica-Mega variable frequency drive in a safety disconnect enclosure that can be mounted on a post or wall. This system can be wired for 230 or 460 volts. DOES NOT INCLUDE TRACK. I-Beam groundbed track can be added to purchase at 30' for $10,500, 35' for $12,500, 40' for $14,500. Approx.4,300 lbs

This mill is identical to the model GHS-70 except it features a 30HP 3-phase techtop electric motor with a start-stop switch on saw. Includes 50' of wire between motor and a Fuji Frenica-Mega variable frequency drive in a safety disconnect enclosure that can be mounted on a post or wall. This system can be wired for 230 or 460 volts. DOES NOT INCLUDE TRACK. I-Beam groundbed track can be added to purchase at 30' for $10,500, 35' for $12,500, 40' for $14,500. Approx.4,300 lbs

This mill is identical to the model GHS-96 except it features a 30HP 3-phase techtop electric motor with a start-stop switch on saw. Includes 50' of wire between motor and a Fuji Frenica-Mega variable frequency drive in a safety disconnect enclosure that can be mounted on a post or wall. This system can be wired for 230 or 460 volts. DOES NOT INCLUDE TRACK. Approx. 5,200 lbs

This mill is identical to the model GHS-96 except it features a 30HP 3-phase techtop electric motor with a start-stop switch on saw. Includes 50' of wire between motor and a Fuji Frenica-Mega variable frequency drive in a safety disconnect enclosure that can be mounted on a post or wall. This system can be purchased wired for 230 volt or 460 volt. THIS DOES NOT INCLUDE TRACK FOR MILL TO RUN ALONG. I-Beam groundbeds are available for 30' lengths at $12,750, 35' at $15,300, or 40' at $17,850. Many customization options are also available.. Approx. 5,200 lbs