JLT 79F-16-PC Multi Level Panel Clamp16' Wide, free-standing or wall mount Clamp Rack unit.Equipped with: -- (5) Levels for mounting clamps; -- (36) clamps total manually adjusted - side-to-side and manual open-and-close for all clamps. -- Clamps # 302-40-H-R with 40" opening with a 3-1/2" high x 4" wide jaw. -- (72) # 80-1706 Rocker adaptor plates for up to 6" thick glue stock -- (1) Fastener and shim kit for precise clamp alignmentAvailable Options: -- Pneumatic panel flattener with single lever valve operation, 40" reach and flatten up to 1-1/2" thick material, additional: ...$1,500 -- Glue applicator Redi spreader 6" x 27" grid capacity, additional ...$ 1,200 -- Glue applicator Plate spreader 8" x 48" grid capacity, additional ...$2,350 -- Clamp 3 1/2" X 40" opening ... $ 149 -- 79-1680-Handle $110 for use with 1/2" drive impact gun (adjustable torque preferred with setting of 50-55 ft/lbsFloor space requirement: 16' x 52"W x 70" high

JLT 79F- 6-PC Multi Level Panel Clamp6' Wide, free-standing or wall mount Clamp Rack unit.Equipped with: -- (5) Levels for mounting clamps; -- (8) clamps manually adjusted - side-to-side and manual open-and-close for all clamps. -- Clamps have a 40" opening with a 3-1/2" high x 4" wide jaw. (52" clamp available upon request)Available Options: -- Pneumatic panel flattener with single lever valve operation, 40" reach and flatten up to 1-1/2" thick material, additional: ...$1,500 -- Glue applicator Redi spreader 6" x 27" grid capacity, additional ...$ 1,200 -- Glue applicator Plate spreader 8" x 48" grid capacity, additional ...$2,350 -- Clamp 3 1/2" X 40" opening ... $ 149 -- 79-1680-Handle $110 for use with 1/2" drive impact gun (adjustable torque preferred with setting of 50-55 ft/lbsFloor space requirement: 75" x 70" x 48" high

JLT 79F-8-PC Multi Level Panel Clamp8' Wide, free-standing or wall mount Clamp Rack unit.Equipped with: -- (5) Levels for mounting clamps; -- (18) clamps manually adjusted - side-to-side and manual open-and-close for all clamps. -- Clamps have a 40" opening with a 3-1/2" high x 4" wide jaw.Available Options: -- Pneumatic panel flattener with single lever valve operation, 40" reach and flatten up to 1-1/2" thick material, additional: ...$1,500 -- Glue applicator Redi spreader 6" x 27" grid capacity, additional ...$ 1,200 -- Glue applicator Plate spreader 8" x 48" grid capacity, additional ...$2,350 -- Clamp 3 1/2" X 40" opening ... $ 149 -- 79-1680-Handle $110 for use with 1/2" drive impact gun (adjustable torque preferred with setting of 50-55 ft/lbsFloor space requirement: 100" x 70" x 48" high

JLT 79F-12-PC Multi Level Panel Clamp12' Wide, free-standing or wall mount Clamp Rack unit.Equipped with: -- (5) Levels for mounting clamps; -- (6) clamps per level (a total of 30) manually adjusted - side-to-side and manual open-and-close for all clamps. -- Clamps have a 40" opening with a 3-1/2" high x 4" wide jaw.Available Options: -- Pneumatic panel flattener with single lever valve operation, 40" reach and flatten up to 1-1/2" thick material, additional: ...$1,500 -- Glue applicator Redi spreader 6" x 27" grid capacity, additional ...$ 1,200 -- Glue applicator Plate spreader 8" x 48" grid capacity, additional ...$2,350 -- Clamp 3 1/2" X 40" opening ... $ 149 -- 79-1680-Handle $110 for use with 1/2" drive impact gun (adjustable torque preferred with setting of 50-55 ft/lbsFloor space requirement: 144" x 78" x 52" high

JLT 78H-16W-84L-40H-M4 Pneumatic Pod Press w/adjustable Opening.Specifications: -- Pneumatic Vertical Clamping System features upper and lower 16" wide and up to 84" long steel platens for face gluing a variety of solid wood components. -- Powered by a total of (18) 20 square inch diaphragm cylinders. -- With it's modular design each section has its own pressure control and 40" opening. -- 16" Wide x 84" Long x 40" High with fixed clamping opening with 1-1/2" adjustable increments. -- Air-operated assembly, for face gluing of engineered stiles & rails, kickers, headers, and many other solid wood applications. -- Single lever valve operation with dial regulator pressure controls for quick & accurate clamping pressure. -- Up to 30 Ton max. clamping pressure @ 120 PSI.

JLT 78H-16W-42L Mini Air Pod PressThis Pneumatic Vertical Clamping System features upper and lower 16" wide and up to 42" long steel platens for face gluing a variety of solid wood components. With its modular design with each section having its own pressure control and 40" opening, Specifications: -- 16" Deep x 42" long clamping capacity. -- Air-operated assembly, for face gluing of engineered stiles & rails, kickers, headers, and many other solid wood applications. -- Single lever valve operation with dial regulator pressure controls for quick & accurate clamping pressure. -- Up to 30 Ton max. clamping pressure @ 120 PSI.

This Pneumatic Vertical Clamping System features upper and lower 12" wide and up to 126" long steel platens for face gluing a variety of solid wood components. With it's modular design with each section having its own pressure control and 40" opening. -- 12" Deep x 42" wide clamping cap. -- Air operated assembly, for face gluing of engineered stiles & rails, kickers, headers, and many other solid wood applications. -- Single lever valve operation with dial regulator pressure controls for quick & accurate clamping pressure. -- Up to 30 Ton max. clamping pressure @ 120 PSI.

This Pneumatic Vertical Clamping System features upper and lower 12" wide and up to 42" long steel platens for face gluing a variety of solid wood components. With its modular design with each section having its own pressure control and 40" opening, 13" daylight. -- 12" Deep x 42" long clamping cap. -- Air operated assembly, for face gluing of engineered stiles & rails, kickers, headers, and many other solid wood applications. -- Single lever valve operation with dial regulator pressure controls for quick & accurate clamping pressure. -- Up to 30 Ton max. clamping pressure @ 120 PSI.

JLT CLAMPS - 79K-7-M, ...Clamp (Door, Double Miter) Large cap. Miter Door Clamp with: 38" x 84" Max. cap., (2) vertical and (2) horizontal pneumatic clamps. -- Each clamp includes: JLT Dial control system for fine adjustments. This innovative dial control system allows for adjustments in both directions while the door is under clamping pressure. -- Also, successfully clamp and square stile & rile cabinet doors.

JLT Clamps 302-40-H-R DOOR AND PANEL CLAMP40" Capcity clamp (min 8-1/2") Patented Equalizer Design Provides Equal Clamping from the Front and Rear Jaws, Resulting in a Higher Quality Panel. #302 Style Clamp with Standard 3-1/2" High Jaws for Increased Durability and Less Clamps Per Glue Up.Also available with 36", 44" and 52" capacities.

JLT CLAMPS 78H-12-42-40 Mini Pod PressSingle section 12" wide x 42" long cap., 40" max. opening, 13" daylight, 30 ton max.,clamping pressure at 120 PSI, Pod Press is powered by a total of (18) 20 square inch diaphragm cylinders, upper platen has a 2" stroke when air is activated.Features: Heavy duty upper and lower steel platens, single lever valve pneumatic operation with dial regulator pressure controls, stack multiple wood components up to 12" wide and ships pre-assembled. Includes: Manual jack for platen adjustment.

JOHN DEERE 470G LC Large Hydraulic ExcavatorSpecifications: -- Max. digging depth: 27'-2" to 29'-11" -- Engine: JOHN DEERE 6135HT997 -- Displacement: 13.5 L -- Cylinders: 6 -- Fuel type: Diesel -- kW: 560 -- Transmission: Hydrostatic 2-speed travel -- Tracks Width: 35-1/2" -- Stick length: 12'-5" -- Quick coupler: Hydraulic -- Bucket width: 60" -- Hours: 4,602Equipped with: -- TOPCON 3DMC Control -- Operators station: EROPS -- AC and Heat -- Grade control -- Counterweights -- Auto lube -- Cutting Edge: Weld-On -- Grouser Pads: Triple

JOHN DEERE 324K Compact Wheel LoaderProductive for tight turns and extra agility in close quarters.Specifications: -- Engine Power: 70 HP -- Engine type: YANMAR Diesel -- Full-turn tipping load: 9,766 Lbs -- Bucket capacity range: 1.4–2.0 cu. yd -- Bucket breakout force: 2,364 Lbs -- Operating weight: 14,087 Lbs

JOHN DEERE 550K Crawler DozerThe John Deere 550K is a crawler dozer with a Power-Angle-Tilt (PAT) blade.Specifications: -- Engine: PowerTech PWS 4045 engine (turbocharged) -- Displacement: 4.5L (276 cu. in.) -- Net Rated Power: 92 HP at 2,200 rpm (69 kW) -- Transmission: Hydrostatic -- Blade Type: Power-Angle-Tilt (PAT) -- Blade size: 105" (2.67 m) -- Maximum Travel Speed: 8.0 km/h (5.0 mph) - Maximum (optional) 9.7 km/h (6.0 mph) -- Operating Weight (with standard equipment): 7718–8279 kg (17,016–18,252 lb.) -- Fuel Tank Capacity: 234 L (61.9 gal.). -- Hours: 1318Equipped with: -- Air conditioning and heated Cab -- Power-Angle-Tilt (PAT) blade -- Rock guards

JOHN DEERE 85G Mid-Sized ExcavatorNeither too big nor too small, these right-size excavators are the perfect solution for a wide varietyof tasks.Specifications: -- Engine: Net Power 56.9 HP at 2,000 rpm ( (ISO 9249) 42.4 kW) -- Engine Cylinders: 4 -- Powertrain: 2-speed propel with automatic shift - Low 3.1 km/h (1.9 mph) - High 5.0 km/h (3.1 mph) - Drawbar Pull 6650 kgf (14,661 lb.) -- Swing Speed: 10.5 rpm -- Fuel Tank 31.7 gal -- Hours: 710Equipped with: -- AC and Heated Cab -- Front blade -- Multifunction, color LCD monitor -- 2-speed propel with automatic shift -- Electronic engine control -- Reduced-drift valve for boom down, arm in -- Auxiliary hydraulic valve section -- Work lights: Halogen / 1 mounted on boom / 1 mounted on frameThe 85G comes equipped with an independent-swing boom that enables work close to curbs, parallel to structures, or alongsidetraffic. We can provide financing and also the most economical delivery to your location.

JOHN DEERE 210G ExcavatorSpecifications: -- Engine: 159 HP at 1,900 rpm -- Max. Travel Speed Low 2.2 mph / High 3.4 mph -- Bucket size: 42" -- Fuel Tank: 06.5 gal -- Undercarriage: 85% -- Hours: 2,540Equipped with: -- Hydraulic thumb -- Quick coupler -- Back-up camera -- Pre-emissions -- Heat / AC -- Recent service -- New batteries

50 HP JORDAN - MS4220: Dual Shaft Shredder with Infeed ConveyorSpecifications -- Overall length: 141". -- Overall width: 56". -- Overall height: 98". -- Cutting chamber size: 42" x 20". -- Hopper size: 1-1/2 - 2 Cubic yard. -- Cutter assembly height: 13-1/2". -- Motor horsepower: 50 HP. -- Approx chamber weight: 4,570 Lbs. MS-4220 is a most popular midrange Shredder with: Power to handle tougher jobs; cost that can fit into your demanding budget. MS-4220 can be used to Shred: Paper, plastic, passenger tires, carpet, and an many other materials. Shredder is designed with: Counterrotating dual speed shafts; cutting group continuously changes knife tip position. This helps the knives grab & pull through hard to hold materials. MS-4220 Industrial Shredder offers: Midsize chamber capacity; horsepower to handle many of the most demanding applications. For a cost-effective Shredder, this unit cannot be beat for volume reduction & material shredding. The MS-4220 Industrial Shredder is a "Workhorse."

JV MANUFACTURING - PH-04, ...Pre-Crusher CompactorSpecifications: -- Hydraulic Cylinder: 7" -- Charge Box Capacity: 4 Cu.yd -- Cycle Time: 56 Sec -- Total Force: 77,000 Lbs -- Ram Face Dimensions: 60" x 35" -- Motor: 20 HPEquipped with: -- Rear Deck

(2) JV MANUFACTURING - VB-60-B & VB-72-B, ...Vertical Balers Lot: (2) Vertical Balers in great working condition!Specifications: -- Cylinder: 6" -- Main motor: 10 HPEquipped with: -- ANSI Z245.5 Compliant -- Key operated controls -- Quiet operating Vane Pump -- Gas spring assisted Loading Door

JV MANUFACTURING - HE-60 BIG MOUTH, ...Closed-Door Horizontal BalerSpecifications: -- Cylinders: (2) 6" -- Main motor: 20 HP -- Bale size: 60"; x 30"; x 48"; -- Feed opening: 18,000 LbsEquipped with: -- Conveyor hopper -- Factory infeed conveyor -- Full penRefurbished work. New: Guides, press head cover, main door hinge pin, main door patch pin, oil & filters, hoses as required, seals in control manifold, belt on conveyor, drive chain, and sprockets on conveyor.Rebuilt: Cylinders, door latch cylinder, shear blades sharpened and adjusted. - Gear oil changed in conveyor drive.