ONEIDA AIR SYSTEMS XXK050346 Cyclone 'High Vacuum' Cartridge Filter Dust Collector w/ One Drum: Cyclone & Cartridge Fabric Filtration Dust Collection System for High Pressure CNC applications (need more static pressure for effective cleaning of cutter heads). -- Performance: 2,120 CFM @ 2" SP with Filter. 5 HP US Made BALDOR , Class F, TEFC motor. Magnetic Starter w/ on-off switch and overload protection. -- Fan/Wheel housing: Extremely strong cast aluminum, non-sparking (per NFPA fire code). Efficient Backward Inclined high performance and low noise. No rivets or welds. Fully welded fan housing 11 ga. Motor Housing plate. -- Cyclone: (8") solid welded inlet with Neutral Vane. Technology reduces filter maintenance. 16-gage cyclone barrel with solid welded construction. Rectangular outlet cam be rotated independent of inlet - 8-bolt patterns. Outlet is 10.03" x 7.64" inside dimensions. Square to round adaptor available. Approx. 26" dia. cyclone housing. -- Efficient Filter Cartridge For 155 sq. ft. of filter media. Filters 99.9% efficient of 0.2 - 2.0 microns @ 11 FPM , wide pleated spacing and teflon-like interior coating for easy dust release. Filter size: (1) 18" x 39" & (1) 18: x 19.5". Filter Grounding Wire. -- Includes: Filter Efficiency Gauge. Built-in Silencer reduces sound to 75-81dBA @10' . One 55 Gallon Steel Drum. Top seal cover and flexible connection to cyclone discharge. Angle iron support stand w/leg extensions. -- Dimensions: 31" x 59" x 109.5".Available Options;Bag Gripper, Plastic Bag Hold-Down SystemHoppers / Multiple DrumsBin Level IndicatorRotary AirlockRemote Starter - Radio Frequency - 1 Phase onlyGE HEPA (H-12) Filter Media)Available with 600 Volt motor.

ONEIDA AIR SYSTEMS XXK10 Cyclone Dust Collector w/ After-filter and Drum: Cyclone & Fabric Filtration Dust Collection System.Specifications: -- 3,800 CFM @ 2.3" SP with 10 HP US Made, Class F, TEFC motor with 1.15 service factor. -- High efficiency 12-gauge cyclone barrel with fully seam-welded construction. Powder coated paint finish, weather-proof cyclone and fan blower. -- (3) High Efficient Izumi Axtar Spunbond Media cartridge after-filters for 465 sq. ft. of filter media. Filters 99.9% efficient of 0.2 - 2.0 microns, teflon-like coating to facilitate dust cake release. -- Impeller is 17" Diameter, Single-piece, backward inclined, non-sparking/non-ferrous, cast aluminum alloy. -- Inlet size 12" round. outlet 12.5" x 10" square dia. -- Includes: Heavy Duty angle iron stand, magnetic starter, and (1) 55 gal. drum kit for waste collection. MADE IN THE USA..

OPTI-SAND - R52V, ...Denibbing Brush SanderSpecifications: -- 1-Head, 52" max. width cap., 0" to 5" max. part thickness opening; designed to completely and thoroughly finish sand and sealer sand workpieces such as raised panel cabinet doors, entry doors, louvers, shutters, etc. -- Equipped with: (1) Carousel head with: (4) Rotating arbors mounted on a central rotating deck assembly; carousel deck rotation 4 to 24 RPM; (2) arbor/spindles are 12" x 41" long with 3 HP motor & (2) arbor/spindles are 12" x 35" long with 2 HP motor; 60 to 600 RPM spindle speed. -- Feed System with: Variable vacuum conveyor belt feed; variable feed speed 4 to 44 FPM; 2 HP feed through drive; 10 HP vacuum motor. -- Control Panel: Spindle (brush) speeds, head rotation speeds, and conveyor speeds are all inverter controlled with infinite knob adjustment; workpiece height is push button adjusted with digital readout.Cabinet: Heavily insulated cabinet for a quieter run; (1) front & (2) side viewing windows; (4) easy access doors; (4) dust collection outlets of 6" each.

ORIGINAL 3512-03 RADIAL ARM SAW (Contractor Series)The Contractor Duty Series is an industrial rated machine that has the versatility to crosscut, bevel cut, miter cut, and swivel to a rip position to cut down panels precisely and accurately. These machines are well suited for cutting off up to 3"; material, as well as cutting off 24"; wide panels for squaring shelving and doors and other similar applications. -- Specifications: -- 3 HP TEFC Saw motor; 12" dia. blade; 1" x 2-3/16" saw arbor; 3-1/16" thickness cap. @ 90°, 1-1/4" @ 45°; 24-1/4" crosscut cap. with 1" stock; 21-1/4" with 3" stock; 16" max. miter cut @ 45° with 1" stock; 34-15/16" rip cap. -- Features: -- Swivel arm for miter cuts, swivel motor for bevel cuts; indexing yoke to 90° for rip cutting panels; saw head with automatic motor brake and automatic spring return; positive locking device for tilting; upper and lower blade guards with anti-kickback attachment. -- Complete with: -- 34" x 26" MDF table; sturdy powder coated cast iron frame; heavy gauge steel base and support legs. -- Optional: --12" x 36 or 60-Tooth x 1" Bore saw blade; OS Series manually adjustable measuring systems; OS Series material handling roller and flat tables; dust collection hoods; key access limiting switch and emergency stop switch.

ORIGINAL 3546 RADIAL ARM SAW (Heavy Duty Series)The Heavy Duty Series is a very precise machine made for the rigors of every day industrial use. Straight, miter, bevel and compound bevel cutting in a heavy gauge steel powder coated frame & legs. Specifications: 5 HP TEFC Saw motor; 16" dia. blade; 1" x 2-3/16" saw arbor; 4-15/16" thickness cap. @ 90°, 2" @ 45°; 24" crosscut cap.; 15-1/2" max. miter cut @ 45°; 37-7/8" rip capacity. Features: -- Swivel arm for miter cuts, swivel motor for bevel cuts; indexing yoke to 90° for rip cutting panels; saw head with automatic motor brake and automatic spring return; positive locking device for tilting; upper and lower blade guards with anti-kickback attachment. Complete with: -- 42-1/2" x 31-1/4" MDF table; sturdy powder coated cast iron frame; heavy gauge steel base and support legs. Optional: -- 16" x 60-Tooth x 1" Bore saw blade; pneumatic clamping systems; power carriage feed; 14" & 22" wide roller tables.

ORIGINAL 3558 RADIAL ARM SAW (Super Duty Series)The Super Duty Series is the ultimate workhorse of the industry, capable of operating 2 to 3 shifts per day. Miter & bevel cutting, compound miters and dado operations. Constructed of heavy-duty cast and ductile iron for vibration-free operation. Specifications: -- 7.5 HP TEFC Saw motor; 20" dia. blade; 1" x 3-1/8" saw arbor; 6-1/4" thickness cap. @ 90°, 3-1/4" @ 45°; 32" crosscut cap.; 21-5/8" max. miter cut @ 45°; 48-3/4" rip cap. Features: -- Swivel arm for miter cuts, swivel motor for bevel cuts; indexing yoke to 90° for rip cutting panels; saw head with automatic motor brake and automatic spring return; positive locking device for tilting; upper and lower blade guards with anti-kickback attachment. Complete with: 58" x 50" MDF table; sturdy powder coated cast iron frame; heavy gauge steel base and support legs. Optional: -- 20" x 60-Tooth x 1" Bore saw blade; pneumatic clamping systems; power carriage feed; 14" & 22" wide roller tables.

ORIGINAL 3579-16L Metal Cutting Radial Arm Saw (Super Duty Series)The Super Duty Series is the ultimate workhorse of the industry, capable of operating 2 to 3 shifts per day. Miter & bevel cutting, compound miters and dado operations. Constructed of heavy duty cast and ductile iron for vibration free operation.Specifications: -- 7.5 HP TEFC Saw motor; 16" dia. blade; 1" x 3-1/8" saw arbor; 5" thickness cap. @ 90°, 2" @ 45° bevel; 32" crosscut cap.; 21-5/8" max. miter cut @ 45°. -- Features: -- Swivel arm for miter cuts, swivel motor for bevel cuts; indexing yoke to 90° for rip cutting panels; saw head with automatic motor brake and manual chain feed assembly; positive locking device for tilting; upper and lower blade guards with anti-kickback attachment. -- Complete with: -- The Metal Cutting Series comes with the standard t-slot aluminum extruded top, allowing easy to attach aluminum fence, clamping systems, table surface options, as well as your own clamping jigs or cutting fixtures. These all come mounted to a extruded leveling frame for easy leveling of the entire table assembly throughout the life of the machine. -- Available Options: -- Power feed saw head; pneumatic clamping systems; Mist Coolant System (manual for non-ferrous cutting); blade.

ORIGINAL - 3551, ...Radial Arm SawThe "Original" Radial Arm with: Full 24" crosscut capability. -- Sturdy cast iron frame for saw head and arm.Equipped with: -- 5 HP Single-phase motor with: Magnetic starter and overload protection. -- Saw head with: Automatic motor brake and automatic return. -- Positive locking device for tilting. -- Large 49" x 50" MDF table. -- 16" Blade cap. with: 4-3/8" Material thickness at 90°. -- Features: -- Heavy gauge steel base & legs for solid support. -- Complete upper & lower blade guards and anti-kickback attachment.

ORIGINAL 3691-03 Overhead Rail Panel SawSpecifications: -- Sturdy welded steel frame for saw head and beam arm; 7.5 HP motor; 1" dia. arbor; 1-3/8" long arbor; saw head with automatic electro-mechanical motor brake. -- 20" Max. blade dia.; 7" max. cutting depth @ 90°; 3-1/2" @ 45°; 62" long x 1", 4" & 6" thick max. crosscut cap. -- Complete with: -- 36" x 60" MDF table; heavy gauge steel base & legs for solid support. -- Includes: -- Upper & lower blade guards; magnetic starter and overload protection. -- Single-phase option available for;...$ 250.

ORIGINAL 3691-01-7 Overhead Rail Panel SawSpecifications: -- Sturdy welded steel frame for saw head and beam arm; 7.5 HP motor; 1" dia. arbor; 1-3/8" long arbor; saw head with automatic electro-mechanical motor brake. -- 20-1/2" Max. blade dia.; 8" max. cutting depth @ 90°; 4" @ 45°; 60" long x 1" max. crosscut cap. -- Complete with: -- 36" x 60" MDF table; heavy gauge steel base & legs for solid support. -- Includes: -- Upper & lower blade guards; magnetic starter and overload protection.

ORIGINAL 3579-22L Metal Cutting Radial Arm Saw (SD Series)SD Series is the ultimate workhorse of the industry, capable of operating 2 to 3 shifts per day. Miter & bevel cutting, compound miters and dado operations. Constructed of heavy duty cast and ductile iron for vibration free operation. Aluminum, Brass, Bronze, Copper, Fiberglass, Lead Sheets, Plastic, Steel. Specifications: -- 7.5 HP TEFC Saw motor; 22.5" dia. blade; 1" x 3-1/8" saw arbor; 8" thickness cap.; 4" @ 45° bevel; 24" crosscut cap. with 3/4" stock; 21-5/8" max. miter @ 45°. -- Features: -- Swivel arm for miter cuts, swivel motor for bevel cuts; saw head features VFD technology; which increases the start-up speed of the blade by over 8 seconds with a slower, smoother start-up that slows and stops the saw over approximately 25 seconds to allow for consistent braking times; positive locking device for tilting; upper and lower blade guards with anti-kickback attachment. -- Complete with: -- The Metal Cutting Series comes with the standard t-slot aluminum extruded top, allowing easy to attach aluminum fence, clamping systems, table surface options, as well as your own clamping jigs or cutting fixtures. These all come mounted to an extruded leveling frame for easy leveling of the entire table assembly throughout the life of the machine. -- Available Options: -- Power feed saw head; pneumatic clamping systems; Mist Coolant System (manual for non-ferrous cutting); blade.

RAIMANN Model ASA 1650 II, Veneer Patcher.Specifications: -- 5HP gearmotor, drive conversion wit new clutch and motor. Strip type mechanical plug-feeder mechanism - cap.. of up to (40) Plugs/Min.; -- Thickness of veneer patchable 1/32" - 3/16" (0.8 mm - 4.76 mm). Profile P-34 dies in good condition. -- Table dimensions approx. 39" x 47" -- Throat distance from tool to back column 65" -- Table height 35" -- Tool sequence: Veneer patch is cut by the table die and scrap is ejected into discharge chutes, veneer patch blank is then positioned against the underside of the table die, plug punch cuts replacement veneer patch from underside and patch is inserted into the proper position. -- Reconditioned by experts. -- Overall size: 10' 8" (3,250 mm) Length x 67" (1,700 mm) height; approx. weight 12,000 Lbs (5,450 kG). --Option: Veneer Strip Feeder. Feeds standard strip widths continuously. Venturi vacuum cup strip feed mechanism. All pneumatic operation. 120 Volt/60 Hz controls.please inquire for price extra. --Actual model is RAIMANN Model ASA II 1650.

RAIMANN KR 310 2M Multiple Rip Saw System ( 2 Moving Blades )12-1/4" Max. width cap., 13-1/2" chain width, 50 HP - 4,200 RPM V-belt driven arbor.Equipped with & Features: -- Quick Fix arbor with: (2) Movable blade and (3) fixed blades; (4) Laser Lights. -- Enlarged movable saw housing with 25" pass through. Ball threaded adjustment of spindle. Saw blades mounted to individual collars. -- Chain with spikes every 3rd link, with automatic oiler with indicator light. -- Driven fluted lower roller with smooth upper roller for smooth feeding. Auto oiler for guide lubrication. -- (4) Sets of anti-kickback fingers and 12" dia. dust hoods. Cutting Specifications -- Cutting depth with 12" Dia. saw blades, 2-1/2" with pressure shoe; 4" without pressure shoe. -- Variable feed speed, 16 - 158 FPM, feed drive 2 HP motor.Additional Features -- Sound enclosure with vertical pneumatic lifting -- Adjustable infeed fence. -- Automatic over thickness shutoff on infeed. -- Automatic starting and swing arbor mount for control panel.Note: Transformer for 600 volts included if necessary

RAIMANN KM-US BV Gang Rip Saw with one (1) Moving BladeSpecifications: -- (1) Shifting blade with foot pedal control; -- Fixed blades mounted to individual collars that slide up-and-down the arbor into position, then lock into place by tightening the "Quick fix" nut on the arbor, no tools & no spacers required. -- 12" Dia. saw blades, 65 mm (2-1/2" dia.). -- Arbor, 3-1/2" max. depth of cut. -- 20" centers between upper holddown rollers (wood holddown shoe plate not included). -- 6" Throat depth to the right of the blade. -- 3/4" Min. strip width, 21" min. stock length.Equipped with & Features: -- Variable feed speed 16 - 110 FPM, -- Feed drive 1.2 HP motor; -- Chain spikes every 3rd chain link, -- Automatic chain lubrication, -- (2) Sets of top & bottom anti-kickback fingers, -- Extended infeed with additional bed roll, adjustable infeed fence. -- Complete with: Automatic over-thickness shutoff on infeed, -- Automatic starting, -- 8" Dia. dust hood. -- Includes (4) Lasers and Tooling as pictured.

RAIMANN KR 310 2M Multiple Blade Rip Saw System with Valu-Rip Infeed12-1/4" Max. width cap., 13-1/2" chain width, 50 HP - 4,200 RPM V-belt driven arbor.Equipped with: -- Quick Fix arbor with: (2) Movable blades and (3) fixed blades; (5) Laser Lights. -- Enlarged movable saw housing with 25" pass-through. Ball threaded adjustment of spindle. Saw blades mounted to individual collars. -- Chain with spikes every 3rd link, with automatic oiler with indicator light. -- Driven fluted lower roller with smooth upper roller for smooth feeding. Auto oiler for guide lubrication. -- (4) Sets of anti-kickback fingers and 12" dia. dust hoods. -- Raimtech E5 with TimberMax Software optimizing software; making it possible to get the most out of incoming lumber. The software optimizes rips for width or grade. TimberMax calculates the most profitable ripping solution for each board at which time shifting saw blades are positioned automatically. Infeed includes an infeed-belt conveyor with a pressure roller. Infeed is mounted on a slide that automatically adjusts the board in the best position before entering the saw. The conveyor is 24" wide X 120" long.Cutting Specifications: -- The cutting depth with 12" Dia. saw blades is 2-1/2" with a pressure shoe and 4" without a pressure shoe. -- The variable feed speed is 16 - 158 FPM, and the feed drive is a 2 HP motor.Features: -- Sound enclosure with vertical pneumatic lifting -- Adjustable infeed fence. -- Automatic over-thickness shutoff on infeed. -- Automatic starting and swing arbor mount for control panel.Also included: -- Valu-Rip infeed system 16' long -- (4) Movable Laser light Note: The machine, chain feed, and arbor, have recently been refurbished.

Raimann ValueRip RipMax.NOTE : Never been set-up or installed. Specifications -- 17 Points of width measurement for basic shape detection -- Industrial PC with ergonomic, touch screen. -- TimberMAX optimizing/tally software, based on shape optimizing. -- System will automatically position fence and moving blades appropriate to the solution. Equipped with & Features -- Moving lasers display rip solution prior to ripping. -- 10-14 Average number of boards processed per minute by the operator. Note: This is based on 10 ft. boards with no overrides. -- New, unused machine. Sold in 2021, Never Installed

RAIMANN - KR 310 2M: Multiple Rip Saw System (2 Moving Blades)12-1/4" Max. width cap.; 13-1/2" chain width; 50 HP - 4,200 RPM V-belt driven arbor.Equipped with and Features: -- Quick Fix arbor with: (2) Movable blades; (3) fixed blades. -- Movable Operator Pedestal with: LED Screen; pushbutton controls. -- Chain with spikes every 3rd link; automatic oiler with indicator light. -- Driven fluted lower roller with: Smooth upper roller for smooth feeding.Auto oiler for guide lubrication. -- (4) Sets of anti-kickback fingers; 12" dia. dust hoods.Cutting Specifications -- Blade Diameter: 9.8" - 15". -- Cutting depth with: 12" Dia. saw blades; 2-1/2" with pressure shoe; 4" without pressure shoe. -- Variable feed speed: 16 - 158 FPM; feed drive: 2 HP Motor.Additional Features -- Sound enclosure with vertical pneumatic lifting -- Adjustable infeed fence. -- Automatic over thickness shutoff on infeed. ÷ Automatic starting and swing arbor mount for control panel.

RAIMANN - KR 310 2M: Multiple Blade Rip Saw System with Valu-Rip Infeed12-1/4" Max. width cap., 13-1/2" chain width, 50 HP - 4,200 RPM V-belt driven arbor.Specifications -- Quick Fix arbor with: (2) Movable blades; (3) fixed blades; (5) Laser Lights. -- Enlarged movable saw housing with 25" pass-through. Ball threaded adjustment of spindle. Saw blades mounted to individual collars. -- Chain with spikes every 3rd link with: Automatic oiler with indicator light. -- Driven fluted lower roller with: Smooth upper roller for smooth feeding.Auto oiler for guide lubrication. -- (4) Sets of: Anti-kickback fingers & 12" dia. dust hoods.Cutting Specifications -- Cutting depth with: 12" Dia. saw blades; 2-1/2" with a pressure shoe, 4" without a pressure shoe. -- Variable feed speed: 16 - 158 FPM; feed drive: 2 HP motor.Equipped with & Features -- Sound enclosure with vertical pneumatic lifting. -- Adjustable infeed fence. -- Automatic overthickness shutoff on infeed. -- Automatic starting and swing arbor mount for Control Panel.Also Included: -- Valu-Rip Infeed system: 16' Long. -- (4) Movable Laser lights.

RAIMANN (WEINIG) - Variorip 310 M with: Infeed & (2) Moving Blades SystemClean, very hard-to-find 2014 (Infeed 2022) WEINIG RAIMANN Variorip 310 M: Optimizing Rip Saw with (2) moving blades & Infeed SystemSpecifications -- Working dims. Length: 24″ to 184″; width to 12.2″ (310 mm); thickness 0.59″ to 3.94″ (184″ is fence length). -- Cutting dims: Width min. 5/8″ (1st movable blade); min. 1-5/8″ to 10-1/4″ (2nd movable blade); fixed pocket 1″. -- Production in auto mode: 7 x 10′ Boards per minute. -- Saw. 50 HP Motor with: Arbor dimension of 2.6″; RPM: 4,200. -- Quick fix arbor (handturn nut) for position blades. -- Saw blade dia.: 12″ to 14″ (300 - 350 mm). -- Blade positions by: Ball screw adjustment. -- Chain: 12-3/4″ Width steel chain with every 3rd link with spikes. --. Automatic oiler for chain lubrication. -- The chain has auto shutoff when the oil level is low.Roto chain brush for: Continuous chain cleaning of debris. (4) Sets of anti-kickback fingers. -- Feed: Variable 26 - 157 FPM (8 - 48 MPM); 3 HP motor.Equipped with and Features: -- Controller: RAIMANN "TimberMAX" with: 15″ Color screen' storage for (100) cut lists. -- Production recording and yield. -- Also includes: (4) Lasers with mounts; spare parts; manuals.Footprint & Weight: Infeed is 3,306 Lbs and roughly 8' x 16'.Saw is: 4,603 Lbs and roughly 6' x 6'.The Saw slightly offsets the infeed. So, the footprint together is a little larger; ...probably closer to 9' x 23'.NOTE Saw is: 2014 INFEED is 202SOME Spec's need to be verified.

High Temperature Batch Oven10'W X 8'H X 30'L Batch Oven with Doors on both ends for Drive Through production. --Top Mount Burner Box w/ 2.1mBTU Maxon Burner. --14,000 CFM Recirculation Fan w/ 10HP motor. --Utilities required are 460v/3ph electrical and 14" W.C. @ 5 PSI gas supply. --Gas Train is FM Listed and the Control Panel is UL Listed. --1/4" Steel Plate Floor. --Comes with all of the original drawings, manuals & schematics for this oven.Installation and start up can be quoted separately.